scispace - formally typeset
Search or ask a question
Author

George R. MacCartney

Other affiliations: King Saud University
Bio: George R. MacCartney is an academic researcher from New York University. The author has contributed to research in topics: Path loss & Omnidirectional antenna. The author has an hindex of 36, co-authored 60 publications receiving 6936 citations. Previous affiliations of George R. MacCartney include King Saud University.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
TL;DR: Experimental measurements and empirically-based propagation channel models for the 28, 38, 60, and 73 GHz mmWave bands are presented, using a wideband sliding correlator channel sounder with steerable directional horn antennas at both the transmitter and receiver from 2011 to 2013.
Abstract: The relatively unused millimeter-wave (mmWave) spectrum offers excellent opportunities to increase mobile capacity due to the enormous amount of available raw bandwidth. This paper presents experimental measurements and empirically-based propagation channel models for the 28, 38, 60, and 73 GHz mmWave bands, using a wideband sliding correlator channel sounder with steerable directional horn antennas at both the transmitter and receiver from 2011 to 2013. More than 15,000 power delay profiles were measured across the mmWave bands to yield directional and omnidirectional path loss models, temporal and spatial channel models, and outage probabilities. Models presented here offer side-by-side comparisons of propagation characteristics over a wide range of mmWave bands, and the results and models are useful for the research and standardization process of future mmWave systems. Directional and omnidirectional path loss models with respect to a 1 m close-in free space reference distance over a wide range of mmWave frequencies and scenarios using directional antennas in real-world environments are provided herein, and are shown to simplify mmWave path loss models, while allowing researchers to globally compare and standardize path loss parameters for emerging mmWave wireless networks. A new channel impulse response modeling framework, shown to agree with extensive mmWave measurements over several bands, is presented for use in link-layer simulations, using the observed fact that spatial lobes contain multipath energy that arrives at many different propagation time intervals. The results presented here may assist researchers in analyzing and simulating the performance of next-generation mmWave wireless networks that will rely on adaptive antennas and multiple-input and multiple-output (MIMO) antenna systems.

1,417 citations

Journal ArticleDOI
TL;DR: Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies are compared over the 0.5–100 GHz range.
Abstract: This paper provides an overview of the features of fifth generation (5G) wireless communication systems now being developed for use in the millimeter wave (mmWave) frequency bands. Early results and key concepts of 5G networks are presented, and the channel modeling efforts of many international groups for both licensed and unlicensed applications are described here. Propagation parameters and channel models for understanding mmWave propagation, such as line-of-sight (LOS) probabilities, large-scale path loss, and building penetration loss, as modeled by various standardization bodies, are compared over the 0.5–100 GHz range.

943 citations

Journal ArticleDOI
TL;DR: A case is made for using mmWave for a fifth generation (5G) wireless system for ultradense networks by presenting an overview of enhanced local area (eLA) technology at mmWave with emphasis on 5G requirements, spectrum considerations, propagation and channel modeling, air-interface and multiantenna design, and network architecture solutions.
Abstract: Wireless data traffic is projected to skyrocket 10 000 fold within the next 20 years. To tackle this incredible increase in wireless data traffic, a first approach is to further improve spectrally efficient systems such as 4G LTE in bands below 6 GHz by using more advanced spectral efficiency techniques. However, the required substantial increase in system complexity along with fundamental limits on hardware implementation and channel conditions may limit the viability of this approach. Furthermore, the end result would be an extremely spectrally efficient system with little room for future improvement to meet the ever-growing wireless data usage. The second approach is to move up in frequency, into an unused nontraditional spectrum where enormous bandwidths are available, such as at millimeter wave (mmWave). The mmWave option enables the use of simple air interfaces since large bandwidths can be exploited (e.g., 2 GHz) to achieve high data rates rather than relying on highly complex techniques originally aimed at achieving a high spectral efficiency with smaller bandwidths. In addition, mmWave systems will easily evolve to even higher system capacities, because there will be plenty of margin to improve the spectral efficiency as data demands further increase. In this paper, a case is made for using mmWave for a fifth generation (5G) wireless system for ultradense networks by presenting an overview of enhanced local area (eLA) technology at mmWave with emphasis on 5G requirements, spectrum considerations, propagation and channel modeling, air-interface and multiantenna design, and network architecture solutions.

793 citations

Journal ArticleDOI
TL;DR: The results show that novel large-scale path loss models provided here are simpler and more physically based compared to previous 3GPP and ITU indoor propagation models that require more model parameters and offer very little additional accuracy and lack a physical basis.
Abstract: Ultra-wideband millimeter-wave (mmWave) propagation measurements were conducted in the 28- and 73-GHz frequency bands in a typical indoor office environment in downtown Brooklyn, New York, on the campus of New York University. The measurements provide large-scale path loss and temporal statistics that will be useful for ultra-dense indoor wireless networks for future mmWave bands. This paper presents the details of measurements that employed a 400 Megachips-per-second broadband sliding correlator channel sounder, using rotatable highly directional horn antennas for both co-polarized and crosspolarized antenna configurations. The measurement environment was a closed-plan in-building scenario that included a line-of-sight and non-line-of-sight corridor, a hallway, a cubicle farm, and adjacent-room communication links. Well-known and new single-frequency and multi-frequency directional and omnidirectional large-scale path loss models are presented and evaluated based on more than 14 000 directional power delay profiles acquired from unique transmitter and receiver antenna pointing angle combinations. Omnidirectional path loss models, synthesized from the directional measurements, are provided for the case of arbitrary polarization coupling, aswell as for the specific cases of co-polarized and cross-polarized antenna orientations. The results show that novel large-scale path loss models provided here are simpler and more physically based compared to previous 3GPP and ITU indoor propagation models that require more model parameters and offer very little additional accuracy and lack a physical basis. Multipath time dispersion statistics formmWave systems using directional antennas are presented for co-polarization, crosspolarization, and combined-polarization scenarios, and show that the multipath root mean square delay spread can be reduced when using transmitter and receiver antenna pointing angles that result in the strongest received power. Raw omnidirectional path loss data and closed-form optimization formulas for all path loss models are given in the Appendices.

515 citations

Journal ArticleDOI
TL;DR: In this paper, the authors proposed empirically-based largescale propagation path loss models for 5G cellular network planning in the millimeter-wave spectrum, based on real-world measurements at 28 GHz and 38 GHz in New York City and Austin, Texas, respectively.
Abstract: This article presents empirically-based largescale propagation path loss models for fifthgeneration cellular network planning in the millimeter-wave spectrum, based on real-world measurements at 28 GHz and 38 GHz in New York City and Austin, Texas, respectively. We consider industry-standard path loss models used for today’s microwave bands, and modify them to fit the propagation data measured in these millimeter-wave bands for cellular planning. Network simulations with the proposed models using a commercial planning tool show that roughly three times more base stations are required to accommodate 5G networks (cell radii up to 200 m) compared to existing 3G and 4G systems (cell radii of 500 m to 1 km) when performing path loss simulations based on arbitrary pointing angles of directional antennas. However, when directional antennas are pointed in the single best directions at the base station and mobile, coverage range is substantially improved with little increase in interference, thereby reducing the required number of 5G base stations. Capacity gains for random pointing angles are shown to be 20 times greater than today’s fourth-generation Long Term Evolution networks, and can be further improved when using directional antennas pointed in the strongest transmit and receive directions with the help of beam combining techniques.

498 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.
Abstract: What will 5G be? What it will not be is an incremental advance on 4G. The previous four generations of cellular technology have each been a major paradigm shift that has broken backward compatibility. Indeed, 5G will need to be a paradigm shift that includes very high carrier frequencies with massive bandwidths, extreme base station and device densities, and unprecedented numbers of antennas. However, unlike the previous four generations, it will also be highly integrative: tying any new 5G air interface and spectrum together with LTE and WiFi to provide universal high-rate coverage and a seamless user experience. To support this, the core network will also have to reach unprecedented levels of flexibility and intelligence, spectrum regulation will need to be rethought and improved, and energy and cost efficiencies will become even more critical considerations. This paper discusses all of these topics, identifying key challenges for future research and preliminary 5G standardization activities, while providing a comprehensive overview of the current literature, and in particular of the papers appearing in this special issue.

7,139 citations

Journal ArticleDOI
TL;DR: This survey makes an exhaustive review of wireless evolution toward 5G networks, including the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN, and underlying novel mm-wave physical layer technologies.
Abstract: The vision of next generation 5G wireless communications lies in providing very high data rates (typically of Gbps order), extremely low latency, manifold increase in base station capacity, and significant improvement in users’ perceived quality of service (QoS), compared to current 4G LTE networks. Ever increasing proliferation of smart devices, introduction of new emerging multimedia applications, together with an exponential rise in wireless data (multimedia) demand and usage is already creating a significant burden on existing cellular networks. 5G wireless systems, with improved data rates, capacity, latency, and QoS are expected to be the panacea of most of the current cellular networks’ problems. In this survey, we make an exhaustive review of wireless evolution toward 5G networks. We first discuss the new architectural changes associated with the radio access network (RAN) design, including air interfaces, smart antennas, cloud and heterogeneous RAN. Subsequently, we make an in-depth survey of underlying novel mm-wave physical layer technologies, encompassing new channel model estimation, directional antenna design, beamforming algorithms, and massive MIMO technologies. Next, the details of MAC layer protocols and multiplexing schemes needed to efficiently support this new physical layer are discussed. We also look into the killer applications, considered as the major driving force behind 5G. In order to understand the improved user experience, we provide highlights of new QoS, QoE, and SON features associated with the 5G evolution. For alleviating the increased network energy consumption and operating expenditure, we make a detail review on energy awareness and cost efficiency. As understanding the current status of 5G implementation is important for its eventual commercialization, we also discuss relevant field trials, drive tests, and simulation experiments. Finally, we point out major existing research issues and identify possible future research directions.

2,624 citations

Journal ArticleDOI
05 Feb 2014
TL;DR: Measurements and capacity studies are surveyed to assess mmW technology with a focus on small cell deployments in urban environments and it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities.
Abstract: Millimeter-wave (mmW) frequencies between 30 and 300 GHz are a new frontier for cellular communication that offers the promise of orders of magnitude greater bandwidths combined with further gains via beamforming and spatial multiplexing from multielement antenna arrays. This paper surveys measurements and capacity studies to assess this technology with a focus on small cell deployments in urban environments. The conclusions are extremely encouraging; measurements in New York City at 28 and 73 GHz demonstrate that, even in an urban canyon environment, significant non-line-of-sight (NLOS) outdoor, street-level coverage is possible up to approximately 200 m from a potential low-power microcell or picocell base station. In addition, based on statistical channel models from these measurements, it is shown that mmW systems can offer more than an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks at current cell densities. Cellular systems, however, will need to be significantly redesigned to fully achieve these gains. Specifically, the requirement of highly directional and adaptive transmissions, directional isolation between links, and significant possibilities of outage have strong implications on multiple access, channel structure, synchronization, and receiver design. To address these challenges, the paper discusses how various technologies including adaptive beamforming, multihop relaying, heterogeneous network architectures, and carrier aggregation can be leveraged in the mmW context.

2,452 citations

Journal ArticleDOI
TL;DR: This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.
Abstract: Communication at millimeter wave (mmWave) frequencies is defining a new era of wireless communication. The mmWave band offers higher bandwidth communication channels versus those presently used in commercial wireless systems. The applications of mmWave are immense: wireless local and personal area networks in the unlicensed band, 5G cellular systems, not to mention vehicular area networks, ad hoc networks, and wearables. Signal processing is critical for enabling the next generation of mmWave communication. Due to the use of large antenna arrays at the transmitter and receiver, combined with radio frequency and mixed signal power constraints, new multiple-input multiple-output (MIMO) communication signal processing techniques are needed. Because of the wide bandwidths, low complexity transceiver algorithms become important. There are opportunities to exploit techniques like compressed sensing for channel estimation and beamforming. This article provides an overview of signal processing challenges in mmWave wireless systems, with an emphasis on those faced by using MIMO communication at higher carrier frequencies.

2,380 citations

Journal ArticleDOI
TL;DR: Detailed spatial statistical models of the channels are derived and it is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing.
Abstract: With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York, NY, USA, to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters, including the path loss, number of spatial clusters, angular dispersion, and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

2,102 citations