Gerard Mourou

Bio: Gerard Mourou is an academic researcher from École Polytechnique. The author has contributed to research in topics: Laser & Ultrashort pulse. The author has an hindex of 82, co-authored 653 publications receiving 34147 citations. Previous affiliations of Gerard Mourou include University of Michigan & San Diego State University.

Hole Boring in a DT Pellet and Fast-Ion Ignition with Ultraintense Laser Pulses

Abstract: Recently achieved high intensities of short laser pulses open new prospects in their application to hole boring in inhomogeneous overdense plasmas and for ignition in precompressed DT fusion targets. A simple analytical model and numerical simulations demonstrate that pulses with intensities exceeding 10;{22} W/cm;{2} may penetrate deeply into the plasma as a result of efficient ponderomotive acceleration of ions in the forward direction. The penetration depth as big as hundreds of microns depends on the laser fluence, which has to exceed a few tens of GJ/cm;{2}. The fast ions, accelerated at the bottom of the channel with an efficiency of more than 20%, show a high directionality and may heat the precompressed target core to fusion conditions.

Zettawatt-exawatt lasers and their applications in ultrastrong-field physics

Abstract: Since its birth, the laser has been extraordinarily effective in the study and applications of laser-matter interaction at the atomic and molecular level and in the nonlinear optics of the bound electron. In its early life, the laser was associated with the physics of electron volts and of the chemical bond. Over the past fifteen years, however, we have seen a surge in our ability to produce high intensities, 5 to 6 orders of magnitude higher than was possible before. At these intensities, particles, electrons, and protons acquire kinetic energy in the megaelectron-volt range through interaction with intense laser fields. This opens a new age for the laser, the age of nonlinear relativistic optics coupling even with nuclear physics. We suggest a path to reach an extremely high-intensity level ${10}^{26--28}\mathrm{W}/{\mathrm{cm}}^{2}$ in the coming decade, much beyond the current and near future intensity regime ${10}^{23}\mathrm{W}/{\mathrm{cm}}^{2}$, taking advantage of the megajoule laser facilities. Such a laser at extreme high intensity could accelerate particles to frontiers of high energy, teraelectron volt, and petaelectron volt, and would become a tool of fundamental physics encompassing particle physics, gravitational physics, nonlinear field theory, ultrahigh-pressure physics, astrophysics, and cosmology. We focus our attention on high-energy applications, in particular, and the possibility of merged reinforcement of high-energy physics and ultraintense laser.

A study of the deterministic character of optical damage by femtosecond laser pulses and applications to nanomachining

Abstract: A remarkable feature of material damage induced by short-pulsed lasers is that the energy threshold becomes deterministic for sub-picosecond pulses. This effect, coupled with the advent of kHz and higher repetition rate chirped pulse amplification systems, has opened the field of femtosecond machining. Yet the mechanism of optical breakdown remains unclear. By examining the damage threshold as a function of polarization, we find that, contrary to established belief, multiphoton ionization plays an insignificant role in optical breakdown. The polarization independence, combined with the observed precise and uniform dielectric breakdown threshold even for nanometer-scale features, leads us to conclude that the fundamental mechanism is ‘self-terminated’ Zener-impact ionization, and that the deterministic and uniform damage threshold throughout the sample threshold stems from the uniform valence-electron density found in good-quality optical materials. By systematically exploring optical breakdown near threshold, we find that we can consistently machine features as small as 20 nm, demonstrating great promise for applications ranging from Micro ElectroMechanical Systems (MEMS) construction and microelectronics, to targeted disruption of cellular structures and genetic material.

Relativistic generation of isolated attosecond pulses in a lambda 3 focal volume.

Abstract: Lasers that provide an energy encompassed in a focal volume of a few cubic wavelengths (lambda(3)) can create relativistic intensity with maximal gradients, using minimal energy. With particle-in-cell simulations we found, that single 200 attosecond pulses could be produced efficiently in a lambda(3) laser pulse reflection, via deflection and compression from the relativistic plasma mirror created by the pulse itself. An analytical model of coherent radiation from a charged layer confirms the pulse compression and is in good agreement with simulations. The novel technique is efficient (approximately 10%) and can produce single attosecond pulses from the millijoule to the joule level.

Diode-pumped Kerr-lens mode-locked Yb:KY(WO 4 ) 2 laser

Abstract: A self-starting Kerr-lens mode-locked Yb:KYWO42 laser directly end pumped by two 1.6-W diodes is demonstrated for what is to our knowledge the first time. Pulses as short as 71 fs with 120-mW average output power, at a center wavelength of 1057 nm, were obtained at a repetition rate of 110 MHz. A 10-nm tuning range was achieved with longer pulses and higher average output power.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Phd by thesis

Abstract: Deposits of clastic carbonate-dominated (calciclastic) sedimentary slope systems in the rock record have been identified mostly as linearly-consistent carbonate apron deposits, even though most ancient clastic carbonate slope deposits fit the submarine fan systems better. Calciclastic submarine fans are consequently rarely described and are poorly understood. Subsequently, very little is known especially in mud-dominated calciclastic submarine fan systems. Presented in this study are a sedimentological core and petrographic characterisation of samples from eleven boreholes from the Lower Carboniferous of Bowland Basin (Northwest England) that reveals a >250 m thick calciturbidite complex deposited in a calciclastic submarine fan setting. Seven facies are recognised from core and thin section characterisation and are grouped into three carbonate turbidite sequences. They include: 1) Calciturbidites, comprising mostly of highto low-density, wavy-laminated bioclast-rich facies; 2) low-density densite mudstones which are characterised by planar laminated and unlaminated muddominated facies; and 3) Calcidebrites which are muddy or hyper-concentrated debrisflow deposits occurring as poorly-sorted, chaotic, mud-supported floatstones. These

A roadmap for graphene

Abstract: Recent years have witnessed many breakthroughs in research on graphene (the first two-dimensional atomic crystal) as well as a significant advance in the mass production of this material. This one-atom-thick fabric of carbon uniquely combines extreme mechanical strength, exceptionally high electronic and thermal conductivities, impermeability to gases, as well as many other supreme properties, all of which make it highly attractive for numerous applications. Here we review recent progress in graphene research and in the development of production methods, and critically analyse the feasibility of various graphene applications.

Black Hole Explosions

Abstract: QUANTUM gravitational effects are usually ignored in calculations of the formation and evolution of black holes. The justification for this is that the radius of curvature of space-time outside the event horizon is very large compared to the Planck length (Għ/c3)1/2 ≈ 10−33 cm, the length scale on which quantum fluctuations of the metric are expected to be of order unity. This means that the energy density of particles created by the gravitational field is small compared to the space-time curvature. Even though quantum effects may be small locally, they may still, however, add up to produce a significant effect over the lifetime of the Universe ≈ 1017 s which is very long compared to the Planck time ≈ 10−43 s. The purpose of this letter is to show that this indeed may be the case: it seems that any black hole will create and emit particles such as neutrinos or photons at just the rate that one would expect if the black hole was a body with a temperature of (κ/2π) (ħ/2k) ≈ 10−6 (M/M)K where κ is the surface gravity of the black hole1. As a black hole emits this thermal radiation one would expect it to lose mass. This in turn would increase the surface gravity and so increase the rate of emission. The black hole would therefore have a finite life of the order of 1071 (M/M)−3 s. For a black hole of solar mass this is much longer than the age of the Universe. There might, however, be much smaller black holes which were formed by fluctuations in the early Universe2. Any such black hole of mass less than 1015 g would have evaporated by now. Near the end of its life the rate of emission would be very high and about 1030 erg would be released in the last 0.1 s. This is a fairly small explosion by astronomical standards but it is equivalent to about 1 million 1 Mton hydrogen bombs. It is often said that nothing can escape from a black hole. But in 1974, Stephen Hawking realized that, owing to quantum effects, black holes should emit particles with a thermal distribution of energies — as if the black hole had a temperature inversely proportional to its mass. In addition to putting black-hole thermodynamics on a firmer footing, this discovery led Hawking to postulate 'black hole explosions', as primordial black holes end their lives in an accelerating release of energy.

Materials for terahertz science and technology

Abstract: Terahertz spectroscopy systems use far-infrared radiation to extract molecular spectral information in an otherwise inaccessible portion of the electromagnetic spectrum. Materials research is an essential component of modern terahertz systems: novel, higher-power terahertz sources rely heavily on new materials such as quantum cascade structures. At the same time, terahertz spectroscopy and imaging provide a powerful tool for the characterization of a broad range of materials, including semiconductors and biomolecules.