Gerd Buntkowsky

Bio: Gerd Buntkowsky is an academic researcher from Technische Universität Darmstadt. The author has contributed to research in topics: Solid-state nuclear magnetic resonance & Nuclear magnetic resonance spectroscopy. The author has an hindex of 42, co-authored 313 publications receiving 7008 citations. Previous affiliations of Gerd Buntkowsky include Otto-von-Guericke University Magdeburg & Spanish National Research Council.

Ruthenium Nanoparticles inside Porous [Zn4O(bdc)3] by Hydrogenolysis of Adsorbed [Ru(cod)(cot)]: A Solid-State Reference System for Surfactant-Stabilized Ruthenium Colloids

Abstract: The gas-phase loading of [Zn4O(bdc)3] (MOF-5; bdc = 1,4-benzenedicarboxylate) with the volatile compound [Ru(cod)(cot)] (cod = 1,5-cyclooctadiene, cot = 1,3,5-cyclooctatriene) was followed by solid-state 13C magic angle spinning (MAS) NMR spectroscopy. Subsequent hydrogenolysis of the adsorbed complex inside the porous structure of MOF-5 at 3 bar and 150 °C was performed, yielding ruthenium nanoparticles in a typical size range of 1.5–1.7 nm, embedded in the intact MOF-5 matrix, as confirmed by transmission electron microscopy (TEM), selected area electron diffraction (SAED), powder X-ray diffraction (PXRD), and X-ray absorption spectroscopy (XAS). The adsorption of CO molecules on the obtained Ru@MOF-5 nanocomposite was followed by IR spectroscopy. Solid-state 2H NMR measurements indicated that MOF-5 was a stabilizing support with only weak interactions with the embedded particles, as deduced from the surprisingly high mobility of the surface Ru−D species in comparison to surfactant-stabilized colloidal ...

Hydrogen bonding of water confined in mesoporous silica MCM-41 and SBA-15 studied by 1H solid-state NMR.

Abstract: The adsorption of water in two mesoporous silica materials with cylindrical pores of uniform diameter, MCM-41 and SBA-15, was studied by 1H MAS (MAS=magic angle spinning) and static solid-state NMR spectroscopy. All observed hydrogen atoms are either surface -SiOH groups or hydrogen-bonded water molecules. Unlike MCM-41, some strongly bound water molecules exist at the inner surfaces of SBA-15 that are assigned to surface defects. At higher filling levels, a further difference between MCM-41 and SBA-15 is observed. Water molecules in MCM-41 exhibit a bimodal line distribution of chemical shifts, with one peak at the position of inner-bulk water, and the second peak at the position of water molecules in fast exchange with surface -SiOH groups. In SBA-15, a single line is observed that shifts continuously as the pore filling is increased. This result is attributed to a different pore-filling mechanism for the two silica materials. In MCM-41, due to its small pore diameter (3.3 nm), pore filling by pore condensation (axial-pore-filling mode) occurs at a low relative pressure, corresponding roughly to a single adsorbed monolayer. For SBA-15, owing to its larger pore diameter (8 nm), a gradual increase in the thickness of the adsorbed layer (radial-pore-filling mode) prevails until pore condensation takes place at a higher level of pore filling.

Pyridine-15N: A mobile NMR sensor for surface acidity and surface defects of mesoporous silica

Abstract: The hydrogen bond interaction of pyridine with the silanol groups of the inner surfaces of MCM-41 and SBA-15 ordered mesoporous silica has been studied by a combination of solid-state NMR techniques. The pore diameters were varied between 3 and 4 nm for MCM-41 and between 7 and 9 nm for SBA-15. 1 H MAS experiments performed under magic angle spinning (MAS) conditions in the absence and the presence of pyridine-d 5 reveal that the large majority of silanol groups are located in the inner surfaces, isolated from each other but able to form hydrogen bonds with pyridine. On the other hand, low- and room-temperature 1 5 N CPMAS and MAS experiments (CP ≡ cross-polarization) performed on pyridine- 1 5 N show that at low concentrations all pyridine molecules are involved in hydrogen bonds with the surface silanol groups. In the presence of an excess of pyridine, a non-hydrogen-bonded pyridine phase is observed at 120 K in the slow hydrogen bond exchange regime and associates with an inner core phase. From these measurements, the number of pyridine molecules bound to the inner surfaces corresponding to the number of silanol groups could be determined to be n O H 3 nm - 2 for MCM-41 and 3.7 nm - 2 for SBA-15. At room temperature and low concentrations, the pyridine molecules jump rapidly between the hydrogen-bonded sites. In the presence of an excess of pyridine, the hydrogen-bonded binding sites are depleted as compared to low temperatures, leading to smaller apparent numbers n O H . Using a correlation established previously between the 1 5 N and 1 H chemical shifts and the NHO hydrogen bond geometries, as well as with the acidity of the proton donors, the distances in the pyridine-hydroxyl pairs were found to be about r H N = 1.68 A, r O H = 1.01 A, and r O N = 2.69 A. This geometry corresponds in the organic solid state to acids exhibiting in water a pK a of about 4. Roomtemperature 1 5 N experiments on static samples of pyridine- 1 5 N in MCM-41 at low coverage show a residual 1 5 N chemical shift anisotropy, indicating that the jumps of pyridine between different different silanol hydrogen bond sites is accompanied by an anisotropic reorientational diffusion. A quantitative analysis reveals that in this regime the rotation of pyridine around the molecular C 2 axis is suppressed even at room temperature, and that the angle between the Si-O axes and the OH axes of the isolated silanol groups is about 47°. These results are corroborated by 2 H NMR experiments performed on pyridine-4-d 1 . In contrast, in the case of SBA-15 with the larger pore diameters, the hydrogen bond jumps of pyridine are associated with an isotropic rotational diffusion, indicating a high degree of roughness of the inner surfaces. This finding is correlated with the finding by 2 9 Si CPMAS of a substantial amount of Si(OH) 2 groups in SBA-15. in contrast to the MCM-41 materials. The Si(OH) 2 groups are associated with surface defects, exhibiting not only silanol groups pointing into the pore center but also silanol groups pointing into other directions of space including the pore axes, leading to the isotropic surface diffusion. All results are used to develop molecular models for the inner surface structure of mesoporous silica which may be a basis for future simulations of the surfaces of mesoporous silica.

Structural and dynamical properties of guest molecules confined in mesoporous silica materials revealed by NMR.

Abstract: In the last fifteen years several novel porous silica materials, which are periodically structured on the mesoscopic length scale, have been synthesized. They are of broad interest for fundamental studies of surface–substrate interactions, for studies of the dynamics of guest molecules in confinement and for studies of the effect of confinement on the structural and thermophysical properties of fluids. Examples of such confinement effects include the change of the freezing and melting points or glass transitions of the confined liquids. These effects are studied by combinations of several NMR techniques, such as 15N- and 2H-solid-state NMR line shape analysis, MAS NMR and NMR diffusometry with physico-chemical characterization techniques such as nitrogen adsorption and small angle diffraction of neutrons or X-rays. This combination does not require crystalline samples or special clean and well defined surfaces such as conventional surface science techniques, but can work with typical ill-defined real world systems. The review discusses, after a short introduction, the salient features of these materials and the applied NMR experiments to give the reader a basic knowledge of the systems and the experiments. The rest of the review then focuses on the structural and dynamical properties of guest molecules confined in the mesoporous silica. It is shown that the confinement into the pores leads to fascinating new features of the guests, which are often not known for their bulk phases. These features depend strongly on the interplay of the their interactions with the silica surface and their mutual interactions.

The Chemistry and Applications of Metal-Organic Frameworks

Abstract: Crystalline metal-organic frameworks (MOFs) are formed by reticular synthesis, which creates strong bonds between inorganic and organic units. Careful selection of MOF constituents can yield crystals of ultrahigh porosity and high thermal and chemical stability. These characteristics allow the interior of MOFs to be chemically altered for use in gas separation, gas storage, and catalysis, among other applications. The precision commonly exercised in their chemical modification and the ability to expand their metrics without changing the underlying topology have not been achieved with other solids. MOFs whose chemical composition and shape of building units can be multiply varied within a particular structure already exist and may lead to materials that offer a synergistic combination of properties.

Metal–organic framework materials as catalysts

Abstract: A critical review of the emerging field of MOF-based catalysis is presented. Discussed are examples of: (a) opportunistic catalysis with metal nodes, (b) designed catalysis with framework nodes, (c) catalysis by homogeneous catalysts incorporated as framework struts, (d) catalysis by MOF-encapsulated molecular species, (e) catalysis by metal-free organic struts or cavity modifiers, and (f) catalysis by MOF-encapsulated clusters (66 references).

Engineering Metal Organic Frameworks for Heterogeneous Catalysis

Abstract: 2.2. MOFs with Metal Active Sites 4614 2.2.1. Early Studies 4614 2.2.2. Hydrogenation Reactions 4618 2.2.3. Oxidation of Organic Substrates 4620 2.2.4. CO Oxidation to CO2 4626 2.2.5. Phototocatalysis by MOFs 4627 2.2.6. Carbonyl Cyanosilylation 4630 2.2.7. Hydrodesulfurization 4631 2.2.8. Other Reactions 4632 2.3. MOFs with Reactive Functional Groups 4634 2.4. MOFs as Host Matrices or Nanometric Reaction Cavities 4636