This paper reviews the theory and applications of photoacoustic (also called optoacoustic) methods belonging to the more general area of photothermal measurement techniques. The theory covers excitation of gaseous or condensed samples with modulated continuous light beams or pulsed light beams. The applications of photoacoustic methods include spectroscopy, monitoring deexcitation processes, probing physical properties of materials, and generating mechanical motions. Several other related photothermal methods, as well as particle-acoustics and wave-acoustics methods are also described. This review complements an earlier and narrower review [Rev. Mod. Phys. 53, 517 (1981)] that is mainly concerned with sensitive detection by pulsed photoacoustic spectroscopy in condensed matter.

Applications of photoacoustic sensing techniques

An approach is proposed which combines simultaneously advantages both of pulse (PT) and modulated infrared thermography. In a nondestructive evaluation perspective, the specimen is pulse heated as in PT and the mix of frequencies of the thermal waves launched into the specimen is unscrambled by performing the Fourier transform of the temperature evolution over the field of view. Of interest is the maximum phase image with many attractive features: deeper probing, less influence of surface infrared and optical characteristics, rapid image recording (pulse heating, surface‐wide inspection), and the possibility to inspect high thermal conductivity specimens. Several results are presented and the theory is discussed as well.

Pulse phase infrared thermography

The intensity of the infrared radiation emitted by objects is mainly a function of their temperature. In infrared thermography, this feature is used for multiple purposes: as a health indicator in medical applications, as a sign of malfunction in mechanical and electrical maintenance or as an indicator of heat loss in buildings. This paper presents a review of infrared thermography especially focused on two applications: temperature measurement and non-destructive testing, two of the main fields where infrared thermography-based sensors are used. A general introduction to infrared thermography and the common procedures for temperature measurement and non-destructive testing are presented. Furthermore, developments in these fields and recent advances are reviewed.

/pdf/infrared-thermography-for-temperature-measurement-and-non-2r2amijcr4.pdf

Infrared thermography for temperature measurement and non-destructive testing.

Thermography and thermal wave techniques can be combined to provide in a short‐time low‐frequency phase angle images where nonthermal features can be suppressed. The principle is optical thermal wave generation simultaneously on the whole sample surface and sequential monitoring of all pixels using both thermographic techniques and lock‐in data analysis. Due to parallel stationary excitation one can use low modulation frequencies allowing for a depth range that is of relevance for applications.

Thermal wave imaging with phase sensitive modulated thermography

The nondestructive assessment of the damage that occurs in components during service plays a key role for condition monitoring and residual life estimation of in-service components/structures. Ultrasound has been widely utilized for this; however most of these conventional methods using ultrasonic characteristics in the linear elastic region are only sensitive to gross defects but much less sensitive to micro-damage. Recently, the nonlinear ultrasonic technique, which uses nonlinear ultrasonic behavior such as higher-harmonic generation, subharmonic generation, nonlinear resonance, or mixed frequency response, has been studied as a positive method for overcoming this limitation. In this paper, overall progress in this technique is reviewed with the brief introduction of basic principle in the application of each nonlinear ultrasonic phenomenon.

Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: A review

Lock-in thermography for nondestructive evaluation of materials

It is shown that using optoacoustic phase angle scanning rather than amplitude scanning enables precise measurements of subsurface structure in metal. For some applications the method can be an alternative to x‐ray imaging.

Optoacoustic phase angle measurement for probing a metal

A self-modulation mode of nonlinear acoustic vibrations of cracked defects has been analyzed and observed experimentally. Spectral patterns of the self-modulation are attributed to the sum-frequency type resonance in a multi-degree-of-freedom system and include a subharmonic spectrum as a particular case. Both the subharmonic and self-modulation modes demonstrate a high localization around the defect and provide opportunities for early detection and recognition of damaged areas.

Nonlinear self-modulation and subharmonic acoustic spectroscopy for damage detection and location

We have performed thermal‐wave imaging of subsurface features in a metal using, for the first time, piezoelectric detection. Photoacoustic magnitude and phase images are presented.

Subsurface imaging with photoacoustics

It is experimentally shown that, to provide maximum acoustic wave-defect interaction, the concept of a local defect resonance should be applied. The model of a resonant defect is used for the selection of the wave frequency to enhance the excitation of the defect in nonlinear acoustics and ultrasonic thermography. An increase in nonlinear response of the defect at its local resonance exceeds substantially the one at natural frequencies of the specimen. The strong wave-defect interaction is confirmed by resonance induced rise of local temperature of the defect in the frequency band of its local resonance.

Gerd Busse

Papers

Lock-in thermography for nondestructive evaluation of materials

Optoacoustic phase angle measurement for probing a metal

Nonlinear self-modulation and subharmonic acoustic spectroscopy for damage detection and location

Subsurface imaging with photoacoustics

A local defect resonance to enhance acoustic wave-defect interaction in ultrasonic nondestructive evaluation