Gerhard Busse

Bio: Gerhard Busse is an academic researcher from University of Stuttgart. The author has contributed to research in topics: Thermography & Nondestructive testing. The author has an hindex of 20, co-authored 73 publications receiving 1396 citations.

Ultrasound excited thermography using frequency modulated elastic waves

Abstract: Ultrasound excited thermography allows for defect selective imaging using thermal waves that are generated by elastic waves. The mechanism involved is local friction or hysteresis which turns a dynamically loaded defect into a heat source which is identified by a thermography system. If the excitation frequency matches to a resonance of the vibrating system, temperature patterns can occur that are caused by standing elastic waves. These undesirable patterns can affect the detection of damages in a negative way. We describe a technique how the defect detectability of ultrasound activated thermography can be improved. With the objective of a preferably diffuse distributed sonic field we applied frequency modulated ultrasound to the material. This way the standing waves can be eliminated or reduced and the defect detectability is improved.

Structural health monitoring for a wind turbine system: a review of damage detection methods

Abstract: Renewable energy sources have gained much attention due to the recent energy crisis and the urge to get clean energy. Among the main options being studied, wind energy is a strong contender because of its reliability due to the maturity of the technology, good infrastructure and relative cost competitiveness. In order to harvest wind energy more efficiently, the size of wind turbines has become physically larger, making maintenance and repair works difficult. In order to improve safety considerations, to minimize down time, to lower the frequency of sudden breakdowns and associated huge maintenance and logistic costs and to provide reliable power generation, the wind turbines must be monitored from time to time to ensure that they are in good condition. Among all the monitoring systems, the structural health monitoring (SHM) system is of primary importance because it is the structure that provides the integrity of the system. SHM systems and the related non-destructive test and evaluation methods are discussed in this review. As many of the methods function on local damage, the types of damage that occur commonly in relation to wind turbines, as well as the damage hot spots, are also included in this review.

Infrared thermography for temperature measurement and non-destructive testing.

Abstract: The intensity of the infrared radiation emitted by objects is mainly a function of their temperature. In infrared thermography, this feature is used for multiple purposes: as a health indicator in medical applications, as a sign of malfunction in mechanical and electrical maintenance or as an indicator of heat loss in buildings. This paper presents a review of infrared thermography especially focused on two applications: temperature measurement and non-destructive testing, two of the main fields where infrared thermography-based sensors are used. A general introduction to infrared thermography and the common procedures for temperature measurement and non-destructive testing are presented. Furthermore, developments in these fields and recent advances are reviewed.

Nonlinear ultrasonic techniques for nondestructive assessment of micro damage in material: A review

Abstract: The nondestructive assessment of the damage that occurs in components during service plays a key role for condition monitoring and residual life estimation of in-service components/structures. Ultrasound has been widely utilized for this; however most of these conventional methods using ultrasonic characteristics in the linear elastic region are only sensitive to gross defects but much less sensitive to micro-damage. Recently, the nonlinear ultrasonic technique, which uses nonlinear ultrasonic behavior such as higher-harmonic generation, subharmonic generation, nonlinear resonance, or mixed frequency response, has been studied as a positive method for overcoming this limitation. In this paper, overall progress in this technique is reviewed with the brief introduction of basic principle in the application of each nonlinear ultrasonic phenomenon.

Recent advances in the use of infrared thermography

Abstract: Infrared thermography transforms the thermal energy, emitted by objects in the infrared band of the electromagnetic spectrum, into a visible image. This feature represents a great potentiality to be exploited in many fields, but this technique is still not adequately enclosed in industrial instrumentation because of a lack of adequate knowledge; at first sight, it seems too expensive and difficult to use. The aim of the present paper is to shortly overview existing work and to describe the most relevant experiences devoted to the use of infrared thermography in three main fields, i.e. thermo-fluid dynamics, technology and cultural heritage, which have been performed in the department the authors belong to. Results may be regarded from two points of view, either as validating infrared thermography as a full measurement instrument, or as presenting infrared thermography as a novel technique able to deal with several requirements, which are difficult to perform with other techniques. This study is also an attempt to give indications for a synergic use of the different thermographic methods and sharing experiences in the different fields.

Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance:

Abstract: Voids, the most studied type of manufacturing defects, form very often in processing of fiber-reinforced composites. Due to their considerable influence on physical and thermomechanical properties ...