Gerhard Jakob

Bio: Gerhard Jakob is an academic researcher from Joanneum Research. The author has contributed to research in topics: Grain boundary & Spectral resolution. The author has an hindex of 4, co-authored 10 publications receiving 2578 citations. Previous affiliations of Gerhard Jakob include Max Planck Society.

The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory

Abstract: The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submil- limetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16 × 25 pixels, each, and two filled silicon bolometer arrays with 16 × 32 and 32 × 64 pixels, respectively, to perform integral-field spectroscopy and imaging photom- etry in the 60−210 μm wavelength regime. In photometry mode, it simultaneously images two bands, 60−85 μ mo r 85−125 μ ma nd 125−210 μm, over a field of view of ∼1.75 � × 3.5 � , with close to Nyquist beam sampling in each band. In spectroscopy mode, it images afi eld of 47 �� × 47 �� , resolved into 5 × 5 pixels, with an instantaneous spectral coverage of ∼ 1500 km s −1 and a spectral resolution of ∼175 km s −1 . We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the performance verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions.

The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory

Abstract: The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submillimetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16x25 pixels, each, and two filled silicon bolometer arrays with 16x32 and 32x64 pixels, respectively, to perform integral-field spectroscopy and imaging photometry in the 60-210\mu\ m wavelength regime. In photometry mode, it simultaneously images two bands, 60-85\mu\ m or 85-125\mu\m and 125-210\mu\ m, over a field of view of ~1.75'x3.5', with close to Nyquist beam sampling in each band. In spectroscopy mode, it images a field of 47"x47", resolved into 5x5 pixels, with an instantaneous spectral coverage of ~1500km/s and a spectral resolution of ~175km/s. We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the Performance Verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions.

Determining the Average Grain Size of Super-Alloy Micrographs

Abstract: This work presents a complex solution for determining the average grain size and additional features in super-alloy (Inconel ? 718) micrographs. A crucial point of each automatic grain size measurement system is a reliable segmentation of the grain boundaries using the methods of image processing. This work introduces a novel method for the marker image calculation, which is an essential part of the grayscale image reconstruction. Unlike the methods of grayscale erosion or image subtraction, our method uses the results of contour classification for the goal-directed calculation of the marker image. The grayscale image reconstruction therefore produces an excellent pre-processed image with removed non-grain objects. In addition, the homogeneity inside the grains increases without losing information about the grain boundaries. When the automated grain size measurement using the presented algorithm is compared to the manually evaluated average grain size, we can confirm the acceptance of the proposed method for application in metallurgical praxis.

A multisensor system for texture-based high-speed hardwood lumber inspection

Abstract: A novel solution for automatic hardwood inspection is presented. A sophisticated multi sensor system is required for reliable results. Our system works on a data stream of more than 50 MByte/Sec in input and up to 100 MByte/Sec inside the processing queue. The algorithm is divided into multiple steps. Along a fixed grid the images are decomposed into small squares. 55 texture- and color features are computed for each square. A Maximum Likelihood classifier assigns each square to one out of 12 defect classes with a recognition rate better than 97%. Depending on the defect type a dedicated threshold operation is performed for segmentation. Threshold levels and the selection of the input channel (RGB + filtered images) is the result of the former classification step. A fast algorithm computes bounding rectangles from blobs. Defect type dependent rules are used to combine rectangles. Two additional fast high resolution 3D measurement systems add board shape and 3D defect information. All defect rectangles are passing an additional plausibility check in the last data fusion process before they are delivered to the optimization computer. To guarantee a short response time, image acquisition and image processing are performed in parallel on parallel computing hardware.

Twin and scratch detection and removal in micrograph images of Inconel 718

Abstract: Grain size of forged nickel alloy is an important feature for the mechanical properties of the material For fully automatic grain size evaluation in images of micrographs it is necessary to detect the boundaries of each grain This grain boundary detection is influenced directly by artifacts like scratches and twins Twins can be seen as parallel lines inside one grain, whereas a scratch can be identified as a sequence of collinear line segments that can be spread over the whole image Both kinds of artifacts introduce artificial boundaries inside grains To avoid wrong grain size evaluation, it is necessary to remove these artifacts prior to the size evaluation process For the generation of boundary images various algorithms have been tested The most stable results were achieved by grayscale reconstruction and a subsequent watershed segmentation A modified line Hough transform with a third dimension in the Hough accumulator space, describing the distance of the parallel lines, is used to directly detect twins Scratch detection is done by applying the standard line Hough transform followed by a rule based segment detection along the found Hough lines The results of these operations give a detection rate of more than 90 percent for twins and more than 50 percent for scratches

Herschel Space Observatory - An ESA facility for far-infrared and submillimetre astronomy

Abstract: Herschel was launched on 14 May 2009, and is now an operational ESA space observatory o ering unprecedented observational capabilities in the far-infrared and submillimetre spectral range 55 671 m. Herschel carries a 3.5 metre diameter passively cooled Cassegrain telescope, which is the largest of its kind and utilises a novel silicon carbide technology. The science payload comprises three instruments: two direct detection cameras/medium resolution spectrometers, PACS and SPIRE, and a very high-resolution heterodyne spectrometer, HIFI, whose focal plane units are housed inside a superfluid helium cryostat. Herschel is an observatory facility operated in partnership among ESA, the instrument consortia, and NASA. The mission lifetime is determined by the cryostat hold time. Nominally approximately 20,000 hours will be available for astronomy, 32% is guaranteed time and the remainder is open to the worldwide general astronomical community through a standard competitive proposal procedure.

The Photodetector Array Camera and Spectrometer (PACS) on the Herschel Space Observatory

Abstract: The Photodetector Array Camera and Spectrometer (PACS) is one of the three science instruments on ESA's far infrared and submil- limetre observatory. It employs two Ge:Ga photoconductor arrays (stressed and unstressed) with 16 × 25 pixels, each, and two filled silicon bolometer arrays with 16 × 32 and 32 × 64 pixels, respectively, to perform integral-field spectroscopy and imaging photom- etry in the 60−210 μm wavelength regime. In photometry mode, it simultaneously images two bands, 60−85 μ mo r 85−125 μ ma nd 125−210 μm, over a field of view of ∼1.75 � × 3.5 � , with close to Nyquist beam sampling in each band. In spectroscopy mode, it images afi eld of 47 �� × 47 �� , resolved into 5 × 5 pixels, with an instantaneous spectral coverage of ∼ 1500 km s −1 and a spectral resolution of ∼175 km s −1 . We summarise the design of the instrument, describe observing modes, calibration, and data analysis methods, and present our current assessment of the in-orbit performance of the instrument based on the performance verification tests. PACS is fully operational, and the achieved performance is close to or better than the pre-launch predictions.

Star Formation in the Milky Way and Nearby Galaxies

Abstract: We review progress over the past decade in observations of large-scale star formation, with a focus on the interface between extragalactic and Galactic studies. Methods of measuring gas contents and star-formation rates are discussed, and updated prescriptions for calculating star-formation rates are provided. We review relations between star formation and gas on scales ranging from entire galaxies to individual molecular clouds.

The Herschel-SPIRE instrument and its in-flight performance

Abstract: The Spectral and Photometric Imaging REceiver (SPIRE), is the Herschel Space Observatory`s submillimetre camera and spectrometer It contains a three-band imaging photometer operating at 250, 350 and 500 mu m, and an imaging Fourier-transform spectrometer (FTS) which covers simultaneously its whole operating range of 194-671 mu m (447-1550 GHz) The SPIRE detectors are arrays of feedhorn-coupled bolometers cooled to 03 K The photometer has a field of view of 4' x 8', observed simultaneously in the three spectral bands Its main operating mode is scan-mapping, whereby the field of view is scanned across the sky to achieve full spatial sampling and to cover large areas if desired The spectrometer has an approximately circular field of view with a diameter of 26' The spectral resolution can be adjusted between 12 and 25 GHz by changing the stroke length of the FTS scan mirror Its main operating mode involves a fixed telescope pointing with multiple scans of the FTS mirror to acquire spectral data For extended source measurements, multiple position offsets are implemented by means of an internal beam steering mirror to achieve the desired spatial sampling and by rastering of the telescope pointing to map areas larger than the field of view The SPIRE instrument consists of a cold focal plane unit located inside the Herschel cryostat and warm electronics units, located on the spacecraft Service Module, for instrument control and data handling Science data are transmitted to Earth with no on-board data compression, and processed by automatic pipelines to produce calibrated science products The in-flight performance of the instrument matches or exceeds predictions based on pre-launch testing and modelling: the photometer sensitivity is comparable to or slightly better than estimated pre-launch, and the spectrometer sensitivity is also better by a factor of 15-2

From filamentary clouds to prestellar cores to the stellar IMF: Initial highlights from the Herschel Gould Belt survey

Abstract: We summarize the first results from the Gould Belt survey, obtained toward the Aquila Rift and Polaris Flare regions during the 'science demonstration phase' of Herschel. Our 70-500 micron images taken in parallel mode with the SPIRE and PACS cameras reveal a wealth of filamentary structure, as well as numerous dense cores embedded in the filaments. Between ~ 350 and 500 prestellar cores and ~ 45-60 Class 0 protostars can be identified in the Aquila field, while ~ unbound starless cores and no protostars are observed in the Polaris field. The prestellar core mass function (CMF) derived for the Aquila region bears a strong resemblance to the stellar initial mass function (IMF), already confirming the close connection between the CMF and the IMF with much better statistics than earlier studies. Comparing and contrasting our Herschel results in Aquila and Polaris, we propose an observationally-driven scenario for core formation according to which complex networks of long, thin filaments form first within molecular clouds, and then the densest filaments fragment into a number of prestellar cores via gravitational instability.