Geyou Ao

Bio: Geyou Ao is an academic researcher from National Institute of Standards and Technology. The author has contributed to research in topics: Carbon nanotube & Carbon. The author has an hindex of 15, co-authored 28 publications receiving 949 citations. Previous affiliations of Geyou Ao include Myongji University & Auburn University.

Rheology and Phase Behavior of Lyotropic Cellulose Nanocrystal Suspensions

Abstract: The dispersion microstructure and rheological properties of aqueous sulfonated cellulose nanocrystal (CNC) suspensions have been investigated. Between 3.07 and 10.4 vol % the suspensions phase separated into liquid crystalline and isotropic domains. At 12.1 vol %, no isotropic phase was visible, and the samples had the fingerprint texture characteristic of a cholesteric liquid crystal. Below 35 °C, temperature had little influence on rheology and phase behavior. However, between 35 and 40 °C there was a significant change in both the fraction of isotropic phase and the rheological properties. In contrast to many lyotropic suspensions, the steady shear viscosity did not go through a maximum with increasing concentration. Maxima were observed for complex viscosity, storage modulus, and loss modulus at concentrations that appeared fully liquid crystalline. Time–concentration superposition was successful for the loss modulus but not the storage modulus. This suggests that the interface in biphasic samples aff...

DNA-Controlled Partition of Carbon Nanotubes in Polymer Aqueous Two-Phase Systems

Abstract: Sorting single-wall carbon nanotubes (SWCNTs) of different chiralities is both scientifically interesting and technologically important. Recent studies have shown that polymer aqueous two-phase extraction is a very effective way to achieve nanotube sorting. However, works published to date have demonstrated only separation of surfactant-dispersed SWCNTs, and the mechanism of chirality-dependent SWCNT partition is not well understood. Here we report a systematic study of spontaneous partition of DNA-wrapped SWCNTs in several polymer aqueous two-phase systems. We show that partition of DNA-SWCNT hybrids in a given polymer two-phase system is strongly sequence-dependent and can be further modulated by salt and polymer additives. With the proper combination of DNA sequence, polymer two-phase system, and partition modulators, as many as 15 single-chirality nanotube species have been effectively purified from a synthetic mixture. As an attempt to provide a unified partition mechanism of SWCNTs dispersed by surfactants and by DNA, we present a qualitative analysis of solvation energy for SWCNT colloids in a polymer-modified aqueous phase. Our observation and analysis highlight the sensitive dependence of the hydration energy on the spatial distribution of hydrophilic functionalities.

Differentiating Left- and Right-Handed Carbon Nanotubes by DNA.

Abstract: New structural characteristics emerge when solid-state crystals are constructed in lower dimensions. This is exemplified by single-wall carbon nanotubes, which exhibit a degree of freedom in handedness and a multitude of helicities that give rise to three distinct types of electronic structures: metals, quasi-metals, and semiconductors. Here we report the use of intrinsically chiral single-stranded DNA to achieve simultaneous handedness and helicity control for all three types of nanotubes. We apply polymer aqueous two-phase systems to select special DNA-wrapped carbon nanotubes, each of which we argue must have an ordered DNA structure that binds to a nanotube of defined handedness and helicity and resembles a well-folded biomacromolecule with innate stereoselectivity. We have screened over 300 short single-stranded DNA sequences with palindrome symmetry, leading to the selection of more than 20 distinct carbon nanotube structures that have defined helicity and handedness and cover the entire chiral angl...

Narrow-band single-photon emission through selective aryl functionalization of zigzag carbon nanotubes

Abstract: The introduction of sp3 defects into single-walled carbon nanotubes through covalent functionalization can generate new light-emitting states and thus dramatically expand their optical functionality. This may open up routes to enhanced imaging, photon upconversion, and room-temperature single-photon emission at telecom wavelengths. However, a significant challenge in harnessing this potential is that the nominally simple reaction chemistry of nanotube functionalization introduces a broad diversity of emitting states. Precisely defining a narrow band of emission energies necessitates constraining these states, which requires extreme selectivity in molecular binding configuration on the nanotube surface. We show here that such selectivity can be obtained through aryl functionalization of so-called ‘zigzag’ nanotube structures to achieve a threefold narrowing in emission bandwidth. Accompanying density functional theory modelling reveals that, because of the associated structural symmetry, the defect states become degenerate, thus limiting emission energies to a single narrow band. We show that this behaviour can only result from a predominant selectivity for ortho binding configurations of the aryl groups on the nanotube lattice. Aryl functionalization of carbon nanotubes generates sp3 defects capable of quantum light emission. A multiplicity of possible binding configurations, however, leads to spectrally diverse emission bands. Now, it is shown that the structural symmetry of zigzag nanotubes and a high chemical selectivity for ortho configurations results in defect-state emission from a single narrow band.

An optical nanoreporter of endolysosomal lipid accumulation reveals enduring effects of diet on hepatic macrophages in vivo.

Abstract: The abnormal accumulation of lipids within the endolysosomal lumen occurs in many conditions, including lysosomal storage disorders, atherosclerosis, nonalcoholic fatty liver disease (NAFLD), and drug-induced phospholipidosis. Current methods cannot monitor endolysosomal lipid content in vivo, hindering preclinical drug development and research into the mechanisms linking endolysosomal lipid accumulation to disease progression. We developed a single-walled carbon nanotube–based optical reporter that noninvasively measures endolysosomal lipid accumulation via bandgap modulation of its intrinsic near-infrared emission. The reporter detected lipid accumulation in Niemann-Pick disease, atherosclerosis, and NAFLD models in vivo. By applying the reporter to the study of NAFLD, we found that elevated lipid quantities in hepatic macrophages caused by a high-fat diet persist long after reverting to a normal diet. The reporter dynamically monitored endolysosomal lipid accumulation in vivo over time scales ranging from minutes to weeks, indicating its potential to accelerate preclinical research and drug development processes.

Review of Hydrogels and Aerogels Containing Nanocellulose

Abstract: Naturally derived cellulose nanocrystals (CNCs) and cellulose nanofibrils (CNFs) are emerging nanomaterials that display high strength, high surface area, and tunable surface chemistry, allowing for controlled interactions with polymers, nanoparticles, small molecules, and biological materials. Industrial production of nanocelluloses is increasing rapidly with several companies already producing on the tons-per-day scale, intensifying the quest for viable products across many sectors. While the hydrophilicity of the nanocellulose interface has posed a challenge to the use of CNCs and CNFs as reinforcing agents in conventional plastics, it is a significant benefit for creating reinforced or structured hydrogel composites (or, when dried, aerogels) exhibiting both mechanical reinforcement and a host of other desirable properties. In this context, this Review describes the quickly growing field of hydrogels and aerogels incorporating nanocelluloses; over 200 references are summarized in comprehensive tables ...

Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications

Abstract: With increasing environmental and ecological concerns due to the use of petroleum-based chemicals and products, the synthesis of fine chemicals and functional materials from natural resources is of great public value. Nanocellulose may prove to be one of the most promising green materials of modern times due to its intrinsic properties, renewability, and abundance. In this review, we present nanocellulose-based materials from sourcing, synthesis, and surface modification of nanocellulose, to materials formation and applications. Nanocellulose can be sourced from biomass, plants, or bacteria, relying on fairly simple, scalable, and efficient isolation techniques. Mechanical, chemical, and enzymatic treatments, or a combination of these, can be used to extract nanocellulose from natural sources. The properties of nanocellulose are dependent on the source, the isolation technique, and potential subsequent surface transformations. Nanocellulose surface modification techniques are typically used to introduce e...

Preparation, properties and applications of polysaccharide nanocrystals in advanced functional nanomaterials: a review

Abstract: Intensive exploration and research in the past few decades on polysaccharide nanocrystals, the highly crystalline nanoscale materials derived from natural resources, mainly focused originally on their use as a reinforcing nanophase in nanocomposites. However, these investigations have led to the emergence of more diverse potential applications exploiting the functionality of these nanomaterials. Based on the construction strategies of functional nanomaterials, this article critically and comprehensively reviews the emerging polysaccharide nanocrystal-based functional nanomaterials with special applications, such as biomedical materials, biomimetic optical nanomaterials, bio-inspired mechanically adaptive nanomaterials, permselective nanostructured membranes, template for synthesizing inorganic nanoparticles, polymer electrolytes, emulsion nano-stabilizer and decontamination of organic pollutants. We focus on the preparation, unique properties and performances of the different polysaccharide nanocrystal materials. At the same time, the advantages, physicochemical properties and chemical modifications of polysaccharide nanocrystals are also comparatively discussed in view of materials development. Finally, the perspective and current challenges of polysaccharide nanocrystals in future functional nanomaterials are outlined.

Cellulose nanocrystal-based materials: from liquid crystal self-assembly and glass formation to multifunctional thin films

Abstract: Cellulose nanocrystals (CNCs), produced by the acid hydrolysis of wood, cotton or other cellulose-rich sources, constitute a renewable nanosized raw material with a broad range of envisaged uses: f ...

Quantum emission from hexagonal boron nitride monolayers

Abstract: We demonstrate first room temperature, and ultrabright single photon emission from a color center in two-dimensional multilayer hexagonal boron nitride. Density Functional Theory calculations indicate that vacancy-related centers are a likely source of the emission.