Geza Joos

Bio: Geza Joos is an academic researcher from McGill University. The author has contributed to research in topics: Pulse-width modulation & Power factor. The author has an hindex of 67, co-authored 514 publications receiving 15880 citations. Previous affiliations of Geza Joos include Université du Québec & École de technologie supérieure.

Supercapacitor Energy Storage for Wind Energy Applications

Abstract: As wind energy reaches higher penetration levels, there is a greater need to manage intermittency associated with the individual wind turbine generators. This paper considers the integration of a short-term energy storage device in a doubly fed induction generator design in order to smooth the fast wind-induced power variations. This storage device can also be used to reinforce the dc bus during transients, thereby enhancing its low-voltage ride through (LVRT) capability. The topology is evaluated in terms of its ability to improve the performance both during normal operation and during transients. Results show that when storage is sized based upon the LVRT requirement, it can effectively damp short-term power oscillations, and it provides superior transient performance when compared with conventional topologies

Real-Time Simulation of a Wind Turbine Generator Coupled With a Battery Supercapacitor Energy Storage System

Abstract: Wind power generation studies of slow phenomena using a detailed model can be difficult to perform with a conventional offline simulation program. Due to the computational power and high-speed input and output, a real-time simulator is capable of conducting repetitive simulations of wind profiles in a short time with detailed models of critical components and allows testing of prototype controllers through hardware-in-the-loop (HIL). This paper discusses methods to overcome the challenges of real-time simulation of wind systems, characterized by their complexity and high-frequency switching. A hybrid flow-battery supercapacitor energy storage system (ESS), coupled in a wind turbine generator to smooth wind power, is studied by real-time HIL simulation. The prototype controller is embedded in one real-time simulator, while the rest of the system is implemented in another independent simulator. The simulation results of the detailed wind system model show that the hybrid ESS has a lower battery cost, higher battery longevity, and improved overall efficiency over its reference ESS.

The potential of distributed generation to provide ancillary services

Abstract: The growing concerns regarding electric power quality and availability have led to the installation of more and more distributed generation. In parallel and in the context of an accelerating trend towards deregulation of the electric industry, the unbundling of services, many grouped under ancillary services, should create a market for some of these services. This paper discusses the potential of distributed generation (DG) to provide some of these services. In particular, DG can serve locally as the equivalent of a spinning reserve and voltage support of the AC bus. The main types of distributed generation with emphasis on the power electronic interface and the configurations appropriate to provide ancillary services are reviewed. The flexibility and features provided by the power electronic interface are illustrated. In addition to control of the real power, other functions can be incorporated into the design of the interface to provide services, such as reactive power, and resources associated with power quality. These include voltage sag compensation and harmonic filtering. The implications on the design of the power converter interface are discussed.

A Combined Wavelet and Data-Mining Based Intelligent Protection Scheme for Microgrid

Abstract: This paper presents an intelligent protection scheme for microgrid using combined wavelet transform and decision tree. The process starts at retrieving current signals at the relaying point and preprocessing through wavelet transform to derive effective features such as change in energy, entropy, and standard deviation using wavelet coefficients. Once the features are extracted against faulted and unfaulted situations for each-phase, the data set is built to train the decision tree (DT), which is validated on the unseen data set for fault detection in the microgrid. Further, the fault classification task is carried out by including the wavelet based features derived from sequence components along with the features derived from the current signals. The new data set is used to build the DT for fault detection and classification. Both the DTs are extensively tested on a large data set of 3860 samples and the test results indicate that the proposed relaying scheme can effectively protect the microgrid against faulty situations, including wide variations in operating conditions.

Intelligent-Based Approach to Islanding Detection in Distributed Generation

Abstract: This paper introduces a new intelligent-based approach for detecting islanding in distributed generation (DG). This approach utilizes and combines various system parameter indices in order to secure the detection of islanding for any possible network topology, penetration level and operating condition of the DG under study. Hence, every parameter index displays characteristics for a given set of events. The proposed technique uses the data-mining technology to extract information from the large data sets of these indices after they are screened off-line via massive event analyses using network simulations. The technique is tested on a typical DG with multiple distributed resources and the results indicate that this technique can successfully detect islanding operations. In addition, this technique can also overcome the problem of setting the detection thresholds inherent in the existing techniques by optimizing their settings

Overview of Control and Grid Synchronization for Distributed Power Generation Systems

Abstract: Renewable energy sources like wind, sun, and hydro are seen as a reliable alternative to the traditional energy sources such as oil, natural gas, or coal. Distributed power generation systems (DPGSs) based on renewable energy sources experience a large development worldwide, with Germany, Denmark, Japan, and USA as leaders in the development in this field. Due to the increasing number of DPGSs connected to the utility network, new and stricter standards in respect to power quality, safe running, and islanding protection are issued. As a consequence, the control of distributed generation systems should be improved to meet the requirements for grid interconnection. This paper gives an overview of the structures for the DPGS based on fuel cell, photovoltaic, and wind turbines. In addition, control structures of the grid-side converter are presented, and the possibility of compensation for low-order harmonics is also discussed. Moreover, control strategies when running on grid faults are treated. This paper ends up with an overview of synchronization methods and a discussion about their importance in the control

Recent Advances and Industrial Applications of Multilevel Converters

Abstract: Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

An innovative modular multilevel converter topology suitable for a wide power range

Abstract: This paper presents a new multilevel converter topology suitable for very high voltage applications, especially network interties in power generation and transmission. The fundamental concept and the applied control scheme is introduced. Simulation results of a 36 MW-network intertie illustrate the efficient operating characteristics. A suitable structure of the converter-control is proposed.

A review of active filters for power quality improvement

Abstract: Active filtering of electric power has now become a mature technology for harmonic and reactive power compensation in two-wire (single phase), three-wire (three phase without neutral), and four-wire (three phase with neutral) AC power networks with nonlinear loads. This paper presents a comprehensive review of active filter (AF) configurations, control strategies, selection of components, other related economic and technical considerations, and their selection for specific applications. It is aimed at providing a broad perspective on the status of AF technology to researchers and application engineers dealing with power quality issues. A list of more than 200 research publications on the subject is also appended for a quick reference.