Ghada Zidan

Bio: Ghada Zidan is an academic researcher from Auckland University of Technology. The author has contributed to research in topics: Self-healing hydrogels & Contact lens. The author has an hindex of 4, co-authored 5 publications receiving 147 citations. Previous affiliations of Ghada Zidan include Misr International University.

Medicated ocular bandages and corneal health: potential excipients and active pharmaceutical ingredients.

Abstract: Corneal blindness can occur due to improper healing of the corneal tissues after induced injury or abrasion which can be accidental, pathogenic, or after corneal surgery. Abnormal regulation of the...

3D-Printed Hybrid Collagen/GelMA Hydrogels for Tissue Engineering Applications

Abstract: Simple Summary Incorporating natural polymers along with semi-synthetic gelatin methacrylate (GelMA) is known to improve the mechanical properties of developed hybrid hydrogels. Here, we provide a novel comparison of bioprinted GelMA hybrid hydrogel meshes with different concentrations of collagen extracted from bovine hide and ovine skin by assessing their physicochemical characterizations. No previous work has reported the incorporation of ovine collagen with GelMA to develop hybrid hydrogels. Furthermore, different parameters of extrusion-based bioprinting of the inks, and their printing fidelity were investigated. The maximum percentage of collagen that could be incorporated into the meshes was identified as 1%, as these meshes showed good shape fidelity with stable degradation rates. The results indicate these hydrogel meshes may be suitable for specific tissue engineering applications depending on the source of collagen used. Hybrid meshes with ovine (water-soluble) were found to possess properties that could make them suitable for bone tissue engineering applications. Similarly, results indicated that hybrid meshes with bovine collagen could be used for corneal, cartilage, and various soft tissue engineering applications. Abstract Bioprinting is an emerging technology involved in the fabrication of three-dimensional tissue constructs for the repair and regeneration of various tissues and organs. Collagen, a natural protein found abundantly in the extracellular matrix of several tissues, can be extracted from collagen-rich tissues of animals such as sheep, cows, rats, pigs, horses, birds, and marine animals. However, due to the poor printability of collagen bioinks, biocompatible collagen scaffolds that mimic the extracellular matrix (ECM) are difficult to fabricate using bioprinting techniques. Gelatin methacrylate (GelMA), a semi-synthetic polymer with tunable physical and chemical properties, has been found to be a promising biomaterial in various bioprinting applications. The printability of collagen can be improved by combining it with semi-synthetic polymers such as GelMA to develop hybrid hydrogels. Such hybrid hydrogels printed have also been identified to have enhanced mechanical properties. Hybrid GelMA meshes have not previously been prepared with collagen from ovine sources. This study provides a novel comparison between the properties of hybrid meshes with ovine skin and bovine hide collagen. GelMA (8% w/v) was integrated with three different concentrations (0.5%, 1%, and 2%) of bovine and ovine collagen forming hybrid hydrogels inks that were printed into meshes with enhanced properties. The maximum percentage of collagen suitable for integration with GelMA, forming hybrid hydrogels with a stable degradation rate was 1%. The water-soluble nature of ovine collagen promoted faster degradation of the hybrid meshes, although the structural crosslinking was identified to be higher than bovine hybrid meshes. The 1% bovine collagen hybrid meshes stood out in terms of their stable degradation rates.

A review on stereolithography and its applications in biomedical engineering

Abstract: Stereolithography is a solid freeform technique (SFF) that was introduced in the late 1980s Although many other techniques have been developed since then, stereolithography remains one of the most powerful and versatile of all SFF techniques It has the highest fabrication accuracy and an increasing number of materials that can be processed is becoming available In this paper we discuss the characteristic features of the stereolithography technique and compare it to other SFF techniques The biomedical applications of stereolithography are reviewed, as well as the biodegradable resin materials that have been developed for use with stereolithography Finally, an overview of the application of stereolithography in preparing porous structures for tissue engineering is given

Mucosal Applications of Poloxamer 407-Based Hydrogels: An Overview.

Abstract: Poloxamer 407, also known by the trademark Pluronic® F127, is a water-soluble, non-ionic triblock copolymer that is made up of a hydrophobic residue of polyoxypropylene (POP) between the two hydrophilic units of polyoxyethylene (POE). Poloxamer 407-based hydrogels exhibit an interesting reversible thermal characteristic. That is, they are liquid at room temperature, but they assume a gel form when administered at body temperature, which makes them attractive candidates as pharmaceutical drug carriers. These systems have been widely investigated in the development of mucoadhesive formulations because they do not irritate the mucosal membranes. Based on these mucoadhesive properties, a simple administration into a specific compartment should maintain the required drug concentration in situ for a prolonged period of time, decreasing the necessary dosages and side effects. Their main limitations are their modest mechanical strength and, notwithstanding their bioadhesive properties, their tendency to succumb to rapid elimination in physiological media. Various technological approaches have been investigated in the attempt to modulate these properties. This review focuses on the application of poloxamer 407-based hydrogels for mucosal drug delivery with particular attention being paid to the latest published works.

The role of tear physiology in ocular surface temperature

Abstract: PURPOSE: To determine whether the more rapid cooling of the tear film in dry eyes is related to other tear film parameters, a battery of tear physiology tests was performed on dry eye patients and control subjects. METHODS: Tear evaporation rate was measured with a modified Servomed (vapour pressure) evaporimeter and ocular temperature with an NEC San-ei 6T62 Thermo Tracer in 9 patients diagnosed as having dry eye and in 13 healthy control subjects. Variability in temperature across the ocular surface was described by the temperature variation factor (TVF). Lipid layer structure and tear film stability were assessed with the Keeler Tearscope and tear osmolality was measured by freezing point depression nanolitre osmometry. RESULTS: The data were explored by principal component analysis. The subjects with and without dry eye could be separated into two distinct groups entirely on the basis of their tear physiology. Dry eye patients exhibited higher tear evaporation rates, osmolalities and TVF, lower tear film stabilities and poorer-quality lipid layers than the control subjects. A significant linear relationship was found to exist between tear evaporation rate and TVF for all subjects (R2 = 0.242, p = 0.024). CONCLUSIONS: Rapid cooling of the tear film in dry eyes appears to be related to the reduced stability of the tears and the increased rate of evaporation. The higher latent heat of vaporisation, associated with the increased evaporation in dry eyes, may account for the increased rate of cooling of the tear film in this condition.

Hydrogel design strategies for drug delivery

Abstract: Hydrogels are water-swollen three-dimensional networks made of polymers, proteins, small molecules or colloids. They constitute a versatile platform for drug delivery because of their capacity to encapsulate and protect drugs and provide sustained and/or remotely programmable spatial and temporal release and have thus generated a substantial amount of research for the delivery of either small active compounds or biopharmaceuticals. This article discusses the features that make hydrogels attractive as matrices for delivery and reviews a range of designs, focussing on studies from recent years, in particular: ‘smart’ hydrogels (responding to temperature, light, magnetic fields, ultrasounds or combined stimuli); recent technologies: 3D printing and microneedles; and closes by discussing polymer-free drug delivery systems: peptides, small molecules and colloids.