Author
Gilles Dambrine
Other affiliations: Centre national de la recherche scientifique
Bio: Gilles Dambrine is an academic researcher from university of lille. The author has contributed to research in topics: Noise figure & Noise (electronics). The author has an hindex of 30, co-authored 196 publications receiving 4258 citations. Previous affiliations of Gilles Dambrine include Centre national de la recherche scientifique.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, a method to determine the small-signal equivalent circuit of FETs is proposed, which consists of a direct determination of both the extrinsic and intrinsic small signal parameters in a low-frequency band.
Abstract: A method to determine the small-signal equivalent circuit of FETs is proposed This method consists of a direct determination of both the extrinsic and intrinsic small-signal parameters in a low-frequency band This method is fast and accurate, and the determined equivalent circuit fits the S-parameters well up to 265 GHz >
1,491 citations
TL;DR: In this paper, the authors presented the high frequency performance of single-walled carbon nanotube (SWNT) field effect transistors, with channel consisting of dense networks of high purity semiconducting SWNTs.
Abstract: This paper presents the high frequency performance of single-walled carbon nanotube (SWNT) field-effect transistors, with channel consisting of dense networks of high purity semiconducting SWNTs. Using SWNT samples containing 99% pure semiconducting SWNTs, we achieved operating frequencies above 80 GHz. This record frequency does not require aligned SWNTs, thus demonstrating the remarkable potential of random networks of sorted SWNTs for high frequency electronics.
180 citations
TL;DR: Graphene flexible transistors at gigahertz frequencies are conducted, and it is shown that solution-based single-layer graphene ideally combines the required properties to achieve high speed flexible electronics on plastic substrates.
Abstract: Flexible electronics mostly relies on organic semiconductors but the limited carrier velocity in polymers and molecular films prevents their use at frequencies above a few megahertz. Conversely, the high potential of graphene for high-frequency electronics on rigid substrates was recently demonstrated. We conducted the first study of solution-based graphene transistors at gigahertz frequencies, and we show that solution-based single-layer graphene ideally combines the required properties to achieve high speed flexible electronics on plastic substrates. Our graphene flexible transistors have current gain cutoff frequencies of 2.2 GHz and power gain cutoff frequencies of 550 MHz. Radio frequency measurements directly performed on bent samples show remarkable mechanical stability of these devices and demonstrate the advantages of solution-based graphene field-effect transistors over other types of flexible transistors based on organic materials.
143 citations
TL;DR: In this paper, the degradation of the maximum oscillation frequency is mainly related to the increase of the parasitic feedback gate-to-drain capacitance and output conductance with the physical channel length reduction.
Abstract: Parameters limiting the improvement of high frequency characteristics for deep submicron MOSFETs with the downscaling process of the channel gate length are analyzed experimentally and analytically. It is demonstrated that for MOSFETs with optimized source, drain and gate access, the degradation of the maximum oscillation frequency is mainly related to the increase of the parasitic feedback gate-to-drain capacitance and output conductance with the physical channel length reduction. Optimization of these internal parameters is needed to further improve the high frequency performance of ultra deep submicron MOSFETs.
130 citations
TL;DR: In this paper, a method for measuring the noise parameters of MESFETs and HEMTs is presented based on the fact that three independent noise parameters are sufficient to fully describe the device noise performance.
Abstract: A method for measuring the noise parameters of MESFETs and HEMTs is presented. It is based on the fact that three independent noise parameters are sufficient to fully describe the device noise performance. It is shown that two noise parameters, R/sub n/ and mod Y/sub OPT/ mod , can be directly obtained from the frequency variation of the noise figure F/sub 50/ corresponding to a 50 Omega generator impedance. By using a theoretical relation between the intrinsic noise sources as additional data, the F/sub 50/ measurement only can provide the four noise parameters. A good agreement with more conventional techniques is obtained. >
122 citations
Cited by
More filters
TL;DR: This work reviews the historical development of Transition metal dichalcogenides, methods for preparing atomically thin layers, their electronic and optical properties, and prospects for future advances in electronics and optoelectronics.
Abstract: Single-layer metal dichalcogenides are two-dimensional semiconductors that present strong potential for electronic and sensing applications complementary to that of graphene.
13,348 citations
University of Cambridge1, Istituto Italiano di Tecnologia2, Lancaster University3, University of Manchester4, Catalan Institution for Research and Advanced Studies5, Technical University of Denmark6, Nokia7, Queen Mary University of London8, fondazione bruno kessler9, University of Trento10, Technische Universität München11, Polytechnic University of Milan12, Centre national de la recherche scientifique13, University of Trieste14, University of Ioannina15, University of Geneva16, Trinity College, Dublin17, Texas Instruments18, University of Paris19, Spanish National Research Council20, Leiden University21, Delft University of Technology22, University of Patras23, École Normale Supérieure24, Radboud University Nijmegen25, Nest Labs26, Airbus UK27, Seoul National University28, Yonsei University29, University of Oxford30, Chalmers University of Technology31, University of Groningen32, STMicroelectronics33, Chemnitz University of Technology34, Max Planck Society35, Aalto University36
TL;DR: An overview of the key aspects of graphene and related materials, ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries are provided.
Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.
2,560 citations
IBM1
TL;DR: This work reviews the progress that has been made with carbon nanotubes and, more recently, graphene layers and nanoribbons and suggests that it could be possible to make both electronic and optoelectronic devices from the same material.
Abstract: The semiconductor industry has been able to improve the performance of electronic systems for more than four decades by making ever-smaller devices. However, this approach will soon encounter both scientific and technical limits, which is why the industry is exploring a number of alternative device technologies. Here we review the progress that has been made with carbon nanotubes and, more recently, graphene layers and nanoribbons. Field-effect transistors based on semiconductor nanotubes and graphene nanoribbons have already been demonstrated, and metallic nanotubes could be used as high-performance interconnects. Moreover, owing to the excellent optical properties of nanotubes it could be possible to make both electronic and optoelectronic devices from the same material.
2,274 citations
TL;DR: In this paper, a patterned layer of randomly oriented or partially aligned carbon nanotubes, such as one or more interconnected SWNT networks, is used to provide a semiconductor channel exhibiting improved electronic properties relative to conventional nanotube-based electronic systems.
Abstract: The present invention provides device components geometries and fabrication strategies for enhancing the electronic performance of electronic devices based on thin films of randomly oriented or partially aligned semiconducting nanotubes. In certain aspects, devices and methods of the present invention incorporate a patterned layer of randomly oriented or partially aligned carbon nanotubes, such as one or more interconnected SWNT networks, providing a semiconductor channel exhibiting improved electronic properties relative to conventional nanotubes-based electronic systems.
1,081 citations
TL;DR: In this paper, the authors present a review of recent advances in assembly techniques for forming ultrathin carbon nanotubes, modeling and experimental work that reveals their collective properties, and engineering aspects of implementation in sensors and in electronic devices and circuits with various levels of complexity.
Abstract: Ultrathin films of single-walled carbon nanotubes (SWNTs) represent an attractive, emerging class of material, with properties that can approach the exceptional electrical, mechanical, and optical characteristics of individual SWNTs, in a format that, unlike isolated tubes, is readily suitable for scalable integration into devices. These features suggest the potential for realistic applications as conducting or semiconducting layers in diverse types of electronic, optoelectronic and sensor systems. This article reviews recent advances in assembly techniques for forming such films, modeling and experimental work that reveals their collective properties, and engineering aspects of implementation in sensors and in electronic devices and circuits with various levels of complexity. A concluding discussion provides some perspectives on possibilities for future work in fundamental and applied aspects.
1,060 citations