scispace - formally typeset
Search or ask a question
Author

Gisela Marques

Bio: Gisela Marques is an academic researcher from Spanish National Research Council. The author has contributed to research in topics: Lignin & Pulp (paper). The author has an hindex of 19, co-authored 47 publications receiving 1820 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: Minor signals revealed unusual acylated beta-beta' structures confirming that acylation is produced at the monolignol level, in agreement with chromatographic identification of gamma-acetylated sinapyl alcohol among the plant extractives.

210 citations

Journal ArticleDOI
TL;DR: In all cases, acetylation appears to occur at the monomer stage, and sinapyl and coniferyl acetates seem to behave as real lignin monomers participating in lignification.
Abstract: This work examines the occurrence of native acetylated lignin in a large set of vascular plants, including both angiosperms and gymnosperms, by a modification of the so-called Derivatization Followed by Reductive Cleavage (DFRC) method. Acetylated lignin units were found in the milled wood lignins of all angiosperms selected for this study, including mono- and eudicotyledons, but were absent in the gymnosperms analyzed. In some plants (e.g., abaca, sisal, kenaf, or hornbeam), lignin acetylation occurred at a very high extent, exceeding 45% of the uncondensed (alkyl-aryl ether linked) syringyl lignin units. Acetylation was observed exclusively at the A-carbon of the lignin side chain and predominantly on syringyl units, although a predominance of acetylated guaiacyl over syringyl units was observed in some plants. In all cases, acetylation appears to occur at the monomer stage, and sinapyl and coniferyl acetates seem to behave as real lignin monomers participating in lignification.

185 citations

Journal ArticleDOI
TL;DR: The structural characteristics of the lignin from jute (Corchorus capsularis ) fibers, which are used for high-quality paper pulp production, were studied and it was found that the high predominance of the S-lignin units, together with the high proportion of beta-O-4' aryl ether linkages, are advantageous for pulping.
Abstract: The structural characteristics of the lignin from jute (Corchorus capsularis ) fibers, which are used for high-quality paper pulp production, were studied. The lignin content (13.3% Klason lignin) was high compared to other nonwoody bast fibers used for pulp production. The lignin structure was characterized by pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS), 2D-NMR, and thioacidolysis. Upon Py-GC/MS, jute fibers released predominantly products from syringylpropanoid units with the S/G ratio being 2.1 and a H/G/S composition of 2:33:65. 2D-NMR of the milled wood lignin (MWL) isolated from jute fibers showed a predominance of beta-O-4' aryl ether linkages (72% of total side chains), followed by beta-beta' resinol-type linkages (16% of total side chains) and lower amounts of beta-5' phenylcoumaran (4%) and beta-1' spirodienone-type (4%) linkages and cinnamyl end groups (4%). The high predominance of the S-lignin units, together with the high proportion of beta-O-4' aryl ether linkages, which are easily cleaved during alkaline cooking, are advantageous for pulping. On the other hand, a small percentage (ca. 4%) of the lignin side chain was found to be acetylated at the gamma-carbon, predominantly over syringyl units. The analysis of desulphurated thioacidolysis dimers provided additional information on the relative abundances of the various carbon-carbon and diaryl ether bonds and the type of units (syringyl or guaiacyl) involved in each of the above linkage types. Interestingly, the major part of the beta-beta' dimers included two syringyl units, indicating that most of the beta-beta' substructures identified in the HSQC spectra were of the syringaresinol type (pinoresinol being absent), as already observed in the lignin of other angiosperms.

172 citations

Journal ArticleDOI
TL;DR: The occurrence of beta-beta' homocoupling and cross-coupling products of Sinapyl acetate in the lignins from sisal and kenaf indicates that sinapyl alcohol is acetylated at the monomer stage and that, therefore, sinapylon acetate should be considered as a real monolignol involved in theLignification reactions.
Abstract: The structure of lignins isolated from the herbaceous plants sisal (Agave sisalana), kenaf (Hibiscus cannabinus), abaca (Musa textilis) and curaua (Ananas erectifolius) has been studied upon spectroscopic (2D-NMR) and chemical degradative (derivatization followed by reductive cleavage) methods. The analyses demonstrate that the structure of the lignins from these plants is highly remarkable, being extensively acylated at the γ-carbon of the lignin side chain (up to 80% acylation) with acetate and/or p-coumarate groups and preferentially over syringyl units. Whereas the lignins from sisal and kenaf are γ-acylated exclusively with acetate groups, the lignins from abaca and curaua are esterified with acetate and p-coumarate groups. The structures of all these highly acylated lignins are characterized by a very high syringyl/guaiacyl ratio, a large predominance of � -O-4′ linkages (up to 94% of all linkages), and a strikingly low proportion of traditional � -� ′ linkages, which indeed are completely absent in the lignins from abaca and curaua. The occurrence of � -� ′ homocoupling and cross-coupling products of sinapyl acetate in the lignins from sisal and kenaf indicates that sinapyl alcohol is acetylated at the monomer stage and that, therefore, sinapyl acetate should be considered as a real monolignol involved in the lignification reactions.

166 citations

Journal ArticleDOI
TL;DR: The chemical structure of milled-wood lignins from Eucalyptus globulus, E. nitens and E. dunnii was investigated in this paper.
Abstract: The chemical structure of milled-wood lignins from Eucalyptus globulus, E. nitens, E. maidenii, E. grandis, and E. dunnii was investigated. The lignins were characterized by analytical pyrolysis, t ...

164 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy.
Abstract: Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy. As of 2005, over 3% of the total energy consumption in the United States was supplied by biomass, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy. Similarly, the European Union received 66.1% of its renewable energy from biomass, which thus surpassed the total combined contribution from hydropower, wind power, geothermal energy, and solar power. In addition to energy, the production of chemicals from biomass is also essential; indeed, the only renewable source of liquid transportation fuels is currently obtained from biomass.

3,644 citations

Journal ArticleDOI
TL;DR: Lignin is the generic term for a large group of aromatic polymers resulting from the oxidative combinatorial coupling of 4-hydroxyphenylpropanoids, deposited predominantly in the walls of secondarily thickened cells, making them lignin-like polymers.
Abstract: Lignin is the generic term for a large group of aromatic polymers resulting from the oxidative combinatorial coupling of 4-hydroxyphenylpropanoids ([Boerjan et al., 2003][1]; [Ralph et al., 2004][2]). These polymers are deposited predominantly in the walls of secondarily thickened cells, making them

1,956 citations

Journal ArticleDOI
TL;DR: This review systematically introduces the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years.
Abstract: Because of the high catalytic activities and substrate specificity, natural enzymes have been widely used in industrial, medical, and biological fields, etc. Although promising, they often suffer from intrinsic shortcomings such as high cost, low operational stability, and difficulties of recycling. To overcome these shortcomings, researchers have been devoted to the exploration of artificial enzyme mimics for a long time. Since the discovery of ferromagnetic nanoparticles with intrinsic horseradish peroxidase-like activity in 2007, a large amount of studies on nanozymes have been constantly emerging in the next decade. Nanozymes are one kind of nanomaterials with enzymatic catalytic properties. Compared with natural enzymes, nanozymes have the advantages such as low cost, high stability and durability, which have been widely used in industrial, medical, and biological fields. A thorough understanding of the possible catalytic mechanisms will contribute to the development of novel and high-efficient nanozymes, and the rational regulations of the activities of nanozymes are of great significance. In this review, we systematically introduce the classification, catalytic mechanism, activity regulation as well as recent research progress of nanozymes in the field of biosensing, environmental protection, and disease treatments, etc. in the past years. We also propose the current challenges of nanozymes as well as their future research focus. We anticipate this review may be of significance for the field to understand the properties of nanozymes and the development of novel nanomaterials with enzyme mimicking activities.

1,549 citations

Journal ArticleDOI
TL;DR: This review provides a summary and perspective of the extensive research that has been devoted to each of these three interconnected biorefinery aspects, ranging from industrially well-established techniques to the latest cutting edge innovations.
Abstract: In pursuit of more sustainable and competitive biorefineries, the effective valorisation of lignin is key. An alluring opportunity is the exploitation of lignin as a resource for chemicals. Three technological biorefinery aspects will determine the realisation of a successful lignin-to-chemicals valorisation chain, namely (i) lignocellulose fractionation, (ii) lignin depolymerisation, and (iii) upgrading towards targeted chemicals. This review provides a summary and perspective of the extensive research that has been devoted to each of these three interconnected biorefinery aspects, ranging from industrially well-established techniques to the latest cutting edge innovations. To navigate the reader through the overwhelming collection of literature on each topic, distinct strategies/topics were delineated and summarised in comprehensive overview figures. Upon closer inspection, conceptual principles arise that rationalise the success of certain methodologies, and more importantly, can guide future research to further expand the portfolio of promising technologies. When targeting chemicals, a key objective during the fractionation and depolymerisation stage is to minimise lignin condensation (i.e. formation of resistive carbon–carbon linkages). During fractionation, this can be achieved by either (i) preserving the (native) lignin structure or (ii) by tolerating depolymerisation of the lignin polymer but preventing condensation through chemical quenching or physical removal of reactive intermediates. The latter strategy is also commonly applied in the lignin depolymerisation stage, while an alternative approach is to augment the relative rate of depolymerisation vs. condensation by enhancing the reactivity of the lignin structure towards depolymerisation. Finally, because depolymerised lignins often consist of a complex mixture of various compounds, upgrading of the raw product mixture through convergent transformations embodies a promising approach to decrease the complexity. This particular upgrading approach is termed funneling, and includes both chemocatalytic and biological strategies.

1,466 citations

Journal ArticleDOI
TL;DR: This review provides a “beginning‐to‐end” analysis of the recent advances reported in lignin valorisation, with particular emphasis on the improved understanding of lign in's biosynthesis and structure.
Abstract: Lignin is an abundant biopolymer with a high carbon content and high aromaticity. Despite its potential as a raw material for the fuel and chemical industries, lignin remains the most poorly utilised of the lignocellulosic biopolymers. Effective valorisation of lignin requires careful fine-tuning of multiple "upstream" (i.e., lignin bioengineering, lignin isolation and "early-stage catalytic conversion of lignin") and "downstream" (i.e., lignin depolymerisation and upgrading) process stages, demanding input and understanding from a broad array of scientific disciplines. This review provides a "beginning-to-end" analysis of the recent advances reported in lignin valorisation. Particular emphasis is placed on the improved understanding of lignin's biosynthesis and structure, differences in structure and chemical bonding between native and technical lignins, emerging catalytic valorisation strategies, and the relationships between lignin structure and catalyst performance.

1,390 citations