scispace - formally typeset
Search or ask a question
Author

Giuseppe Coppola

Bio: Giuseppe Coppola is an academic researcher from National Research Council. The author has contributed to research in topics: Digital holography & Holography. The author has an hindex of 40, co-authored 256 publications receiving 5489 citations. Previous affiliations of Giuseppe Coppola include Seconda Università degli Studi di Napoli & University of Naples Federico II.


Papers
More filters
Proceedings ArticleDOI
22 Jun 2015
TL;DR: In this paper, the authors used digital holography combined with Raman Spectroscopy (RS) for a complete analysis of single bovine spermatozoa, highlighting in some cases morphological alterations.
Abstract: Semen analysis is widely used as diagnostic tool for assessing male fertility, controlling and managing the animal reproduction. The most important parameters measured in a semen analysis are the morphology and biochemical alterations. For obtaining such information, non-invasive, label-free and non-destructive techniques have to be used. Digital Holography (DH) combined with Raman Spectroscopy (RS) could represent the perfect candidate for a rapid, non-destructive and high-sensitive morphological and biochemical sperm cell analysis. In this study, DH-RS combined approach is used for a complete analysis of single bovine spermatozoa. High-resolution images of bovine sperm have been obtained by DH microscopy from the reconstruction of a single acquired hologram, highlighting in some cases morphological alterations. Quantitative 3D reconstructions of sperm head, both normal and anomalous, have been studied and an unexpected structure of the post-acrosomal region of the head has been detected. Such anomalies have been also confirmed by Raman imaging analysis, suggesting the protein vibrations as associated Raman marker of the defect.

1 citations

Proceedings ArticleDOI
26 Aug 2005
TL;DR: In this article, a digital holographic microscope (DHM) is employed as non-invasive metrological tool for inspection and characterisation of a micromechanical shunt switches in coplanar waveguide configuration (CPW) for microwave applications.
Abstract: A digital holographic microscope (DHM) is employed as non-invasive metrological tool for inspection and characterization of a micromechanical shunt switches in coplanar waveguide configuration (CPW) for microwave applications. The switch is based on a bridge that can be actuated by using electrodes positioned laterally with respect to the central conductor of the CPW. The DHM features, such as speed, contact-less and non-destructivity, have allowed a full characterization of an electrical actuated shunt switches. In particular, the out-of-plane deformation of the bridge due to the applied voltage has been investigated with high accuracy. DHM inspection allows to investigate the shape of the bridge during the actuation, the total warpage due to the actuation, possible residual gap, possible hysteresis, and so on. These characterizations have been carried out both in static and in dynamic condition. In full paper the complete characterization will be reported together with an accurate description of the optical system employed for the investigation.

1 citations

Journal ArticleDOI
TL;DR: In this article, an advance overview of the state-of-the-art results in the field of silicon-based photonic devices is presented, and a suitable design of a thin photonic crystal slab realized in silicon nitride can exhibit a very strong field enhancement.
Abstract: In the last two decades, there has been growing interest in silicon-based photonic devices for many optical applications: telecommunications, interconnects and biosensors. In this work, an advance overview of our results in this field is presented. Proposed devices allow overcoming silicon intrinsic drawbacks limiting its application as a photonic substrate. Taking advantages of both non-linear and linear effects, size reduction at nanometric scale and new two-dimensional emerging materials, we have obtained a progressive increase in device performance along the last years. In this work we show that a suitable design of a thin photonic crystal slab realized in silicon nitride can exhibit a very strong field enhancement. This result is very promising for all photonic silicon devices based on nonlinear phenomena. Moreover we report on the fabrication and characterization of silicon photodetectors working at near-infrared wavelengths based on the internal photoemission absorption in a Schottky junction. We show as an increase in device performance can be obtained by coupling light into both micro-resonant cavity and waveguiding structures. In addition, replacing metal with graphene in a Schottky junction, a further improve in PD performance can be achieved. Finally, silicon-based microarray for biomedical applications, are reported. Microarray of porous silicon Bragg reflectors on a crystalline silicon substrate have been realized using a technological process based on standard photolithography and electrochemical anodization of the silicon. Our insights show that silicon is a promising platform for the integration of various optical functionalities on the same chip opening new frontiers in the field of low-cost silicon micro and nanophotonics.

1 citations

Journal ArticleDOI
TL;DR: 6-DMAP-treated embryos derived from parthenogenetic activation had significantly higher chromosomal abnormalities than CHX-treated embryo groups (P < 0.05) and the feasibility of using bovine chromosome painting probes on ovine embryo spreads is highlighted.
Abstract: In current somatic cell nuclear transfer (NT) protocols, the reconstructed embryos are activated by incorporation of secondary oocyte activation compounds such as 6-DMAP or cycloheximide (CHX). The effects of these compounds on the chromosome complement of sheep NT embryos have not been studied in detail. Therefore, the aim of this study was to assess the chromosome abnormalities using sex chromosome specific probes of Day 6 blastocyst-stage sheep embryos produced from parthenogenetic activation and NT. Following 20–22 h of IVM, the oocytes were activated by electric pulsing followed by 30-min culture in cytochelasin B. They were reactivated using ionomycin (5 min) followed by 2-h culture in 6-DMAP or CHX. In contrast, NT embryos were produced using standard NT procedures using male sheep fetal fibroblasts. Reconstructed embryos were activated using the same methods described earlier. The embryos (compact morulae and blastocysts) were fixed and subjected to FISH analysis using cattle X and Y chromosome painting probes. The data were analyzed using Fisher's exact test. Of the parthenogenetic embryos (6-DMAP, n = 28; CHX, n = 32) analyzed, none of the embryos was totally haploid (X) or totally polyploid. When all of the nuclei per embryo were considered, normal (XX) genotype embryos were 6.2% and 0.0% in CHX and 6-DMAP groups, respectively. The rest of the embryos were abnormal due to mixoploidy (100% vs. 93.8%, P 0.05) in 6-DMAP and CHX groups, respectively. Monosomy (XO or OY), trisomy (XXY), and tetrasomy (XXYY) were the common abnormalities detected in mixoploid embryos. The abnormal cells per embryo ranged from 3.8% to 41.8% in both treatment groups. The mean total cell number of NT blastocysts was 71.2 ± 9.8 and 63.8 ± 8.4, in 6-DMAP and CHX treatment groups, respectively. In conclusion, the 6-DMAP-treated embryos derived from parthenogenetic activation had significantly higher chromosomal abnormalities than CHX-treated embryo groups (P < 0.05). In contrast, the NT embryos derived from either 6-DMAP or CHX treatment did not show any significant difference in producing chromosomally abnormal embryos at the blastocyst stage. This study also highlights the feasibility of using bovine chromosome painting probes on ovine embryo spreads. This work was supported by NSERC, OMAFRA, and ICCS.

1 citations

Journal ArticleDOI
TL;DR: The study is in progress to determine the relative incidence of the fragile sites at chromosomal band level, in order to construct a ‘fragile-site map’ of river buffalo, which could be utilized for genetic improvement programs of the species.
Abstract: The present study reports on the expression and localization of “fragile sites” (FS) on prometaphase chromosomes of two groups of river buffaloes (Bubalus bubalis, 2n=50; Mediterranean Italian breed), reared in two different farms, with the aim to characterize chromosome fragility in this species. Totally, 400 aphidicolin induced breakages were identified and localized on the standardized ideogram of the river buffalo karyotype. Preliminary results can be synthesized as follows: (a) aphidicolin showed a remarkable decondensing effect on chromosome structure, enabling further studies at high resolution level; (b) the chromosomal expression of the breakages was not different in the two groups of animals; (c) the most fragile chromosomes were the inactive-X, chromosomes 9, 8 and active-X, showing 42, 32, 31 and 30 breakages, respectively; (d) the breaks were localized in the RBG-negative bands (corresponding to eterochromatic regions) or at the band-interband regions; (e) the chromosomal distribution of the break sites was not random and only partially related to chromosome length. The study is in progress to determine the relative incidence of the fragile sites at chromosomal band level, in order to construct a ‘fragile-site map’ of river buffalo, which could be utilized for genetic improvement programs of the species.

1 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations

Journal ArticleDOI
19 May 2005-Nature
TL;DR: Electro-optic modulators are one of the most critical components in optoelectronic integration, and decreasing their size may enable novel chip architectures, and here a high-speed electro-optical modulator in compact silicon structures is experimentally demonstrated.
Abstract: Metal interconnections are expected to become the limiting factor for the performance of electronic systems as transistors continue to shrink in size. Replacing them by optical interconnections, at different levels ranging from rack-to-rack down to chip-to-chip and intra-chip interconnections, could provide the low power dissipation, low latencies and high bandwidths that are needed. The implementation of optical interconnections relies on the development of micro-optical devices that are integrated with the microelectronics on chips. Recent demonstrations of silicon low-loss waveguides, light emitters, amplifiers and lasers approach this goal, but a small silicon electro-optic modulator with a size small enough for chip-scale integration has not yet been demonstrated. Here we experimentally demonstrate a high-speed electro-optical modulator in compact silicon structures. The modulator is based on a resonant light-confining structure that enhances the sensitivity of light to small changes in refractive index of the silicon and also enables high-speed operation. The modulator is 12 micrometres in diameter, three orders of magnitude smaller than previously demonstrated. Electro-optic modulators are one of the most critical components in optoelectronic integration, and decreasing their size may enable novel chip architectures.

2,336 citations

Journal ArticleDOI
TL;DR: The techniques that have, and will, be used to implement silicon optical modulators, as well as the outlook for these devices, and the candidate solutions of the future are discussed.
Abstract: Optical technology is poised to revolutionize short-reach interconnects. The leading candidate technology is silicon photonics, and the workhorse of such an interconnect is the optical modulator. Modulators have been improved dramatically in recent years, with a notable increase in bandwidth from the megahertz to the multigigahertz regime in just over half a decade. However, the demands of optical interconnects are significant, and many questions remain unanswered as to whether silicon can meet the required performance metrics. Minimizing metrics such as the device footprint and energy requirement per bit, while also maximizing bandwidth and modulation depth, is non-trivial. All of this must be achieved within an acceptable thermal tolerance and optical spectral width using CMOS-compatible fabrication processes. This Review discusses the techniques that have been (and will continue to be) used to implement silicon optical modulators, as well as providing an outlook for these devices and the candidate solutions of the future.

2,110 citations

Journal ArticleDOI
12 Feb 2004-Nature
TL;DR: An approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation is described and an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz is demonstrated.
Abstract: Silicon has long been the optimal material for electronics, but it is only relatively recently that it has been considered as a material option for photonics1. One of the key limitations for using silicon as a photonic material has been the relatively low speed of silicon optical modulators compared to those fabricated from III–V semiconductor compounds2,3,4,5,6 and/or electro-optic materials such as lithium niobate7,8,9. To date, the fastest silicon-waveguide-based optical modulator that has been demonstrated experimentally has a modulation frequency of only ∼20 MHz (refs 10, 11), although it has been predicted theoretically that a ∼1-GHz modulation frequency might be achievable in some device structures12,13. Here we describe an approach based on a metal–oxide–semiconductor (MOS) capacitor structure embedded in a silicon waveguide that can produce high-speed optical phase modulation: we demonstrate an all-silicon optical modulator with a modulation bandwidth exceeding 1 GHz. As this technology is compatible with conventional complementary MOS (CMOS) processing, monolithic integration of the silicon modulator with advanced electronics on a single silicon substrate becomes possible.

1,612 citations