Gordon J. Sutton

Bio: Gordon J. Sutton is an academic researcher from University of Technology, Sydney. The author has contributed to research in topics: Throughput & Network packet. The author has an hindex of 13, co-authored 28 publications receiving 566 citations. Previous affiliations of Gordon J. Sutton include University of New South Wales & Commonwealth Scientific and Industrial Research Organisation.

Enabling Technologies for Ultra-Reliable and Low Latency Communications: From PHY and MAC Layer Perspectives

Abstract: Future 5th generation networks are expected to enable three key services—enhanced mobile broadband, massive machine type communications and ultra-reliable and low latency communications (URLLC). As per the 3rd generation partnership project URLLC requirements, it is expected that the reliability of one transmission of a 32 byte packet will be at least 99.999% and the latency will be at most 1 ms. This unprecedented level of reliability and latency will yield various new applications, such as smart grids, industrial automation and intelligent transport systems. In this survey we present potential future URLLC applications, and summarize the corresponding reliability and latency requirements. We provide a comprehensive discussion on physical (PHY) and medium access control (MAC) layer techniques that enable URLLC, addressing both licensed and unlicensed bands. This paper evaluates the relevant PHY and MAC techniques for their ability to improve the reliability and reduce the latency. We identify that enabling long-term evolution to coexist in the unlicensed spectrum is also a potential enabler of URLLC in the unlicensed band, and provide numerical evaluations. Lastly, this paper discusses the potential future research directions and challenges in achieving the URLLC requirements.

A New Queueing Model for QoS Analysis of IEEE 802.11 DCF with Finite Buffer and Load

Abstract: Quality of Service (QoS) and queue management are important issues for IEEE 802.11 systems. However, existing 2-dimensional (2-D) Markov chain models of 802.11 systems are unable to capture the complete QoS performance and queueing behavior due to the lack of an adequate finite buffer model. We present a 3-dimensional (3-D) Markov chain that integrates the 802.11 system contention resolution and queueing processes into one model. The 3rd dimension, that models the queue length, allows us to accurately capture important QoS measures, delay and loss, plus throughput and queue length, for realistic 802.11 systems with finite buffer under finite load. We derive an efficient method for solving the steady state probabilities of the Markov chain. Our 3-D Markov chain is the first finite buffer model defined and solved for 802.11 systems. The solutions, validated by extensive simulations, capture the system dynamics over a wide range of traffic load, buffer capacity, and network size. Our 3-D model points to the existence of an effective maximum throughput and shows its relationship with buffer capacity. We demonstrate that our 3-D model can also be used in resource allocation to determine adequate buffer sizes under a particular QoS constraint.

Performance and Computational Implementation of Nonlinear Model Predictive Control on a Submarine

Abstract: We consider a particular model predictive control (MPC) problem involving a nonlinear constrained submarine in order to explore the practicalities of implementation. The controller is designed using a discretised nonlinear model and is simulated on the continuous time submarine system. This controller comprises on-line constrained finite horizon optimisations, based on gradient methods, accompanied by an Extended Kalman Filter state estimator. Input and state constraints are implemented and the optimisation convergence rate is found to depend considerably on the cost function tuning.

Enabling Ultra-Reliable and Low-Latency Communications through Unlicensed Spectrum

Abstract: In this article, we aim to address the question of how to exploit the unlicensed spectrum to achieve URLLC. Potential URLLC PHY mechanisms are reviewed and then compared via simulations to demonstrate their potential benefits to URLLC. Although a number of important PHY techniques help with URLLC, the PHY layer exhibits an intrinsic trade-off between latency and reliability, posed by limited and unstable wireless channels. We then explore MAC mechanisms and discuss multi-channel strategies for achieving low-latency LTE unlicensed band access. We demonstrate, via simulations, that the periods without access to the unlicensed band can be substantially reduced by maintaining channel access processes on multiple unlicensed channels, choosing the channels intelligently, and implementing RTS/CTS.

Power save with Offset Listen Interval for IEEE 802.11ah Smart Grid communications

Abstract: Communication is an enabling technology for the efficient control and management of next-generation Smart Grids. Energy conservation of the communication devices is essential for future large scale deployment of Smart Grid communication networks. However, existing power save protocols experience high contention in Smart Grid communication networks that have a large number of nodes and periodic traffic. We design a new energy conservation protocol, Power Save with Offset Listen Interval (PS-OLi), to address such contention problems. PS-OLi avoids message collisions by controlling the station wake up time with a calculated offset. A new analytical model is developed to characterize the power save performance of networks with periodic traffic. Simulation results show that our analytical model accurately predicts the collision probability and packet delay. We use our model to evaluate the energy efficiency of PS-OLi and standard power save protocols. Our results show that PS-OLi extends the lifetime of a Smart Grid communication network by more than 10%.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

DNS-based predictive control of turbulence: an optimal benchmark for feedback algorithms

Abstract: Direct numerical simulations (DNS) and optimal control theory are used in a predictive control setting to determine controls that effectively reduce the turbulent kinetic energy and drag of a turbulent flow in a plane channel at Reτ = 100 and Reτ = 180. Wall transpiration (unsteady blowing/suction) with zero net mass flux is used as the control. The algorithm used for the control optimization is based solely on the control objective and the nonlinear partial differential equation governing the flow, with no ad hoc assumptions other than the finite prediction horizon, T, over which the control is optimized.Flow relaminarization, accompanied by a drag reduction of over 50%, is obtained in some of the control cases with the predictive control approach in direct numerical simulations of subcritical turbulent channel flows. Such performance far exceeds what has been obtained to date in similar flows (using this type of actuation) via adaptive strategies such as neural networks, intuition-based strategies such as opposition control, and the so-called ‘suboptimal’ strategies, which involve optimizations over a vanishingly small prediction horizon T+ → 0. To achieve flow relaminarization in the predictive control approach, it is shown that it is necessary to optimize the controls over a sufficiently long prediction horizon T+ [gsim ] 25. Implications of this result are discussed.The predictive control algorithm requires full flow field information and is computationally expensive, involving iterative direct numerical simulations. It is, therefore, impossible to implement this algorithm directly in a practical setting. However, these calculations allow us to quantify the best possible system performance given a certain class of flow actuation and to qualify how optimized controls correlate with the near-wall coherent structures believed to dominate the process of turbulence production in wall-bounded flows. Further, various approaches have been proposed to distil practical feedback schemes from the predictive control approach without the suboptimal approximation, which is shown in the present work to restrict severely the effectiveness of the resulting control algorithm. The present work thus represents a further step towards the determination of optimally effective yet implementable control strategies for the mitigation or enhancement of the consequential effects of turbulence.

A survey on IEEE 802.11ah

Abstract: We study carefully the IEEE 802.11ah draft standard published in July 2014.We overview use cases of .11ah, especially related to smart cities scenarios.We describe in details novel mechanisms and explain why they are needed in .11ah. Smart technologies play a key role in sustainable economic growth. They transform houses, offices, factories, and even cities into autonomic, self-controlled systems acting often without human intervention and thus sparing people routine connected with information collecting and processing. The paper gives an overview of a novel Wi-Fi technology, currently under development, which aims to organize communication between various devices used in such applications as smart grids, smart meters, smart houses, smart healthcare systems, smart industry, etc.