Graham Town

Bio: Graham Town is an academic researcher from Macquarie University. The author has contributed to research in topics: Optical fiber & Fiber laser. The author has an hindex of 32, co-authored 221 publications receiving 4346 citations. Previous affiliations of Graham Town include University of Sydney.

Impedance-Source Networks for Electric Power Conversion Part I: A Topological Review

Abstract: Impedance networks cover the entire of electric power conversion from dc (converter, rectifier), ac (inverter), to phase and frequency conversion (ac-ac) in a wide range of applications. Various converter topologies have been reported in the literature to overcome the limitations and problems of the traditional voltage source, current source as well as various classical buck-boost, unidirectional, and bidirectional converter topologies. Proper implementation of the impedance-source network with appropriate switching configurations and topologies reduces the number of power conversion stages in the system power chain, which may improve the reliability and performance of the power system. The first part of this paper provides a comprehensive review of the various impedance-source-networks-based power converters and discusses the main topologies from an application point of view. This review paper is the first of its kind with the aim of providing a “one-stop” information source and a selection guide on impedance-source networks for power conversion for researchers, designers, and application engineers. A comprehensive review of various modeling, control, and modulation techniques for the impedance-source converters/inverters will be presented in Part II.

Pulsating solitons, chaotic solitons, period doubling, and pulse coexistence in mode-locked lasers: complex Ginzburg-Landau equation approach.

Abstract: The complex Ginzburg-Landau equation (CGLE) is a standard model for pulse generation in mode-locked lasers with fast saturable absorbers. We have found complicated pulsating behavior of solitons of the CGLE and regions of their existence in the five-dimensional parameter space. We have found zero-velocity, moving and exploding pulsating localized structures, period doubling (PD) of pulsations and the sequence of PD bifurcations. We have also found chaotic pulsating solitons. We have plotted regions of parameters of the CGLE where pulsating solutions exist. We also demonstrate the coexistence (bi- and multistability) of different types of pulsating solutions in certain regions of the parameter space of the CGLE.

Multiwavelength generation in an erbium-doped fiber laser using in-fiber comb filters

Abstract: Simultaneous continuous wave multiwavelength operation of an erbium-doped fiber laser has been demonstrated using two types of recently developed in-fiber grating comb filters. The lasing wavelengths and linewidths were determined by the comb filter, which was inserted in a ring cavity with a single inhomogeneously broadened gain medium.

Impedance-Source Networks for Electric Power Conversion Part II: Review of Control and Modulation Techniques

Abstract: Impedance-source networks cover the entire spectrum of electric power conversion applications (dc-dc, dc-ac, ac-dc, ac-ac) controlled and modulated by different modulation strategies to generate the desired dc or ac voltage and current at the output. A comprehensive review of various impedance-source-network-based power converters has been covered in a previous paper and main topologies were discussed from an application point of view. Now Part II provides a comprehensive review of the most popular control and modulation strategies for impedance-source network-based power converters/inverters. These methods are compared in terms of theoretical complexity and performance, when applied to the respective switching topologies. Further, this paper provides as a guide and quick reference for researchers and practicing engineers in deciding which control and modulation method to consider for an application in a given topology at a certain power level, switching frequency and demanded dynamic response.

Integration of electric vehicles and management in the internet of energy

Abstract: Due to the environmental and energy crisis, many countries around the world are electrifying transportation, which will significantly change the way the current power grid operates. It is expected that the deployment of future smart grids will allow two-way energy and information flows through plug-and-play operation of small distributed mobile power generators like electric vehicles (EVs) to benefit the prosumers and at the same time make the grid more efficient and robust. However, the issues associated with the energy and information transfer, battery technologies, battery charging schemes, their standards and management need to be addressed in order to achieve the full benefits of EV integration in the future smart grids and internet of energy (IoE) with local renewable generation. As the current grid with existing infrastructure cannot ensure maximum benefits from EVs, this paper reviews the EV technologies, their connectivity, impacts on grid and standards required for the efficient and economic operation of EVs with distributed energy resources in the IoE. The evolution, comparison, and storage potential of EV technologies are thoroughly discussed. This paper also extensively reviews the connectivity issues, for example current EV charging schemes, software tools required to design smart charging, associated challenges, and possible solutions. The architecture of distributed energy management schemes with EVs and the IoE is discussed in detail. Finally, the standards related to EV integration, energy transfers, and safety aspects are provided. Based on the comprehensive review, future directions are put forward which will be useful for researchers and engineers working with EVs.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Supercontinuum generation in photonic crystal fiber

Abstract: A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.

Dissipative solitons for mode-locked lasers

Abstract: This Review explains the concept of dissipative solitons and their application to high-energy mode-locked fibre laser cavities. Dynamics and effects such as dissipative soliton ‘explosions’ and ‘rain’ are summarized, and an outlook of the field is also provided.

Step-Up DC–DC Converters: A Comprehensive Review of Voltage-Boosting Techniques, Topologies, and Applications

Abstract: DC–DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which fundamental energy storing elements (inductors and capacitors) and/or transformers in conjunction with switch(es) and diode(s) are utilized in the circuit. These techniques include switched capacitor (charge pump), voltage multiplier, switched inductor/voltage lift, magnetic coupling, and multistage/-level, and each has its own merits and demerits depending on application, in terms of cost, complexity, power density, reliability, and efficiency. To meet the growing demand for such applications, new power converter topologies that use the above voltage-boosting techniques, as well as some active and passive components, are continuously being proposed. The permutations and combinations of the various voltage-boosting techniques with additional components in a circuit allow for numerous new topologies and configurations, which are often confusing and difficult to follow. Therefore, to present a clear picture on the general law and framework of the development of next-generation step-up dc–dc converters, this paper aims to comprehensively review and classify various step-up dc–dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc–dc converters are presented and summarized with comparative study of different voltage-boosting techniques.

A Survey on IoT Security: Application Areas, Security Threats, and Solution Architectures

Abstract: The Internet of Things (IoT) is the next era of communication. Using the IoT, physical objects can be empowered to create, receive, and exchange data in a seamless manner. Various IoT applications focus on automating different tasks and are trying to empower the inanimate physical objects to act without any human intervention. The existing and upcoming IoT applications are highly promising to increase the level of comfort, efficiency, and automation for the users. To be able to implement such a world in an ever-growing fashion requires high security, privacy, authentication, and recovery from attacks. In this regard, it is imperative to make the required changes in the architecture of the IoT applications for achieving end-to-end secure IoT environments. In this paper, a detailed review of the security-related challenges and sources of threat in the IoT applications is presented. After discussing the security issues, various emerging and existing technologies focused on achieving a high degree of trust in the IoT applications are discussed. Four different technologies, blockchain, fog computing, edge computing, and machine learning, to increase the level of security in IoT are discussed.