Guangcun Shan

Bio: Guangcun Shan is an academic researcher from Beihang University. The author has contributed to research in topics: Materials science & Graphene. The author has an hindex of 14, co-authored 68 publications receiving 1124 citations. Previous affiliations of Guangcun Shan include Nanjing University of Posts and Telecommunications & City University of Hong Kong.

Flexible transparent PES/silver nanowires/PET sandwich-structured film for high-efficiency electromagnetic interference shielding.

Abstract: We have developed a kind of high-yield synthesis strategy for silver nanowires by a two-step injection polyol method. Silver nanowires and polyethylene oxide (PEO) (M(w) = 900,000) were prepared in a homogeneous-coating ink. Wet composite films with different thicknesses were fabricated on a PET substrate by drawn-down rod-coating technology. Silver nanowires on PET substrates present a homogeneous distribution under the assistance of PEO. Then PEO was thermally removed in situ at a relatively low temperature attributed to its special thermal behavior under atmospheric conditions. As-prepared metallic nanowire films on PET substrates show excellent stability and a good combination of conductivity and light transmission. A layer of transparent poly(ethersulfones) (PESs) was further coated on silver nanowire networks by the same coating method to prevent the shedding and corrosion of silver nanowires. Sandwich-structured flexible transparent films were obtained and displayed excellent electromagnetic interference (EMI) shielding effectiveness.

Prediction of near-room-temperature quantum anomalous Hall effect on honeycomb materials.

Abstract: Recently, the long-sough quantum anomalous Hall effect was realized in a magnetic topological insulator. However, the requirement of an extremely low temperature (approximately 30 mK) hinders realistic applications. Based on ab initio band structure calculations, we propose a quantum anomalous Hall platform with a large energy gap of 0.34 and 0.06 eV on honeycomb lattices comprised of Sn and Ge, respectively. The ferromagnetic (FM) order forms in one sublattice of the honeycomb structure by controlling the surface functionalization rather than dilute magnetic doping, which is expected to be visualized by spin polarized STM in experiment. Strong coupling between the inherent quantum spin Hall state and ferromagnetism results in considerable exchange splitting and, consequently, an FM insulator with a large energy gap. The estimated mean-field Curie temperature is 243 and 509 K for Sn and Ge lattices, respectively. The large energy gap and high Curie temperature indicate the feasibility of the quantum anomalous Hall effect in the near-room-temperature and even room-temperature regions.

New Family of Quantum Spin Hall Insulators in Two-dimensional Transition-Metal Halide with Large Nontrivial Band Gaps.

Abstract: Topological insulators (TIs) are promising for achieving dissipationless transport devices due to the robust gapless states inside the insulating bulk gap. However, currently realized two-dimensional (2D) TIs, quantum spin Hall (QSH) insulators, suffer from ultrahigh vacuum and extremely low temperature. Thus, seeking for desirable QSH insulators with high feasibility of experimental preparation and large nontrivial gap is of great importance for wide applications in spintronics. On the basis of the first-principles calculations, we predict a novel family of 2D QSH insulators in transition-metal halide MX (M = Zr, Hf; X = Cl, Br, and I) monolayers, especially, which is the first case based on transition-metal halide-based QSH insulators. MX family has the large nontrivial gaps of 0.12–0.4 eV, comparable with bismuth (111) bilayer (0.2 eV), stanene (0.3 eV), and larger than ZrTe5 (0.1 eV) monolayers and graphene-based sandwiched heterstructures (30–70 meV). Their corresponding 3D bulk materials are weak to...

Fabrication of FeF3 nanocrystals dispersed into a porous carbon matrix as a high performance cathode material for lithium ion batteries

Abstract: FeF3/C nanocomposites, where FeF3 nanocrystals had been dispersed into a porous carbon matrix, were successfully fabricated by a novel vapour–solid method in a tailored autoclave. Phase evolution of the reaction between the precursor and HF solution vapour under air and argon gas atmospheres were investigated. The results showed that the air in the autoclave played an important role in driving the reaction to form FeF3. The as-prepared FeF3/C delivered 134.3, 103.2 and 71.0 mA h g−1 of charge capacity at a current density of 104, 520, and 1040 mA g−1 in turn, exhibiting superior rate capability to the bare FeF3. Moreover, it displayed stable cycling performance, with a charge capacity of 196.3 mA h g−1 at 20.8 mA g−1. EIS and BET investigations indicated that the good electrochemical performance can be attributed to the good electrical conductivity and high specific surface area that result from the porous carbon matrix.

Epitaxial growth of two-dimensional stanene

Abstract: Following the first experimental realization of graphene, other ultrathin materials with unprecedented electronic properties have been explored, with particular attention given to the heavy group-IV elements Si, Ge and Sn. Two-dimensional buckled Si-based silicene has been recently realized by molecular beam epitaxy growth, whereas Ge-based germanene was obtained by molecular beam epitaxy and mechanical exfoliation. However, the synthesis of Sn-based stanene has proved challenging so far. Here, we report the successful fabrication of 2D stanene by molecular beam epitaxy, confirmed by atomic and electronic characterization using scanning tunnelling microscopy and angle-resolved photoemission spectroscopy, in combination with first-principles calculations. The synthesis of stanene and its derivatives will stimulate further experimental investigation of their theoretically predicted properties, such as a 2D topological insulating behaviour with a very large bandgap, and the capability to support enhanced thermoelectric performance, topological superconductivity and the near-room-temperature quantum anomalous Hall effect.

Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries.

Abstract: Commercial lithium-ion (Li-ion) batteries suffer from low energy density and do not meet the growing demands of the energy storage market. Therefore, building next-generation rechargeable Li and Li-ion batteries with higher energy densities, better safety characteristics, lower cost and longer cycle life is of outmost importance. To achieve smaller and lighter next-generation rechargeable Li and Li-ion batteries that can outperform commercial Li-ion batteries, several new energy storage chemistries are being extensively studied. In this review, we summarize the current trends and provide guidelines towards achieving this goal, by addressing batteries using high-voltage cathodes, metal fluoride electrodes, chalcogen electrodes, Li metal anodes, high-capacity anodes as well as useful electrolyte solutions. We discuss the choice of active materials, practically achievable energy densities and challenges faced by the respective battery systems. Furthermore, strategies to overcome remaining challenges for achieving energy characteristics are addressed in the hope of providing a useful and balanced assessment of current status and perspectives of rechargeable Li and Li-ion batteries.

Controlling the dynamics of spontaneous emission from quantum dots by photonic crystals

Abstract: Control of spontaneously emitted light lies at the heart of quantum optics. It is essential for diverse applications ranging from miniature lasers and light-emitting diodes, to single-photon sources for quantum information, and to solar energy harvesting. To explore such new quantum optics applications, a suitably tailored dielectric environment is required in which the vacuum fluctuations that control spontaneous emission can be manipulated. Photonic crystals provide such an environment: they strongly modify the vacuum fluctuations, causing the decay of emitted light to be accelerated or slowed down, to reveal unusual statistics, or to be completely inhibited in the ideal case of a photonic bandgap. Here we study spontaneous emission from semiconductor quantum dots embedded in inverse opal photonic crystals. We show that the spectral distribution and time-dependent decay of light emitted from excitons confined in the quantum dots are controlled by the host photonic crystal. Modified emission is observed over large frequency bandwidths of 10%, orders of magnitude larger than reported for resonant optical microcavities. Both inhibited and enhanced decay rates are observed depending on the optical emission frequency, and they are controlled by the crystals’ lattice parameter. Our experimental results provide a basis for all-solid-state dynamic control of optical quantum systems.