scispace - formally typeset
Search or ask a question
Author

Guanxiong Liu

Other affiliations: IBM
Bio: Guanxiong Liu is an academic researcher from University of California, Riverside. The author has contributed to research in topics: Graphene & Noise (electronics). The author has an hindex of 33, co-authored 64 publications receiving 4105 citations. Previous affiliations of Guanxiong Liu include IBM.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
TL;DR: It is shown that thermal management of GaN transistors can be substantially improved via introduction of alternative heat-escaping channels implemented with few-layer graphene-an excellent heat conductor, and that graphene quilts perform even better in GaN devices on sapphire substrates.
Abstract: Self-heating is a severe problem for high-power gallium nitride (GaN) electronic and optoelectronic devices. Various thermal management solutions, for example, flip-chip bonding or composite substrates, have been attempted. However, temperature rise due to dissipated heat still limits applications of the nitride-based technology. Here we show that thermal management of GaN transistors can be substantially improved via introduction of alternative heat-escaping channels implemented with few-layer graphene-an excellent heat conductor. The graphene-graphite quilts were formed on top of AlGaN/GaN transistors on SiC substrates. Using micro-Raman spectroscopy for in situ monitoring we demonstrated that temperature of the hotspots can be lowered by ∼20 °C in transistors operating at ∼13 W mm(-1), which corresponds to an order-of-magnitude increase in the device lifetime. The simulations indicate that graphene quilts perform even better in GaN devices on sapphire substrates. The proposed local heat spreading with materials that preserve their thermal properties at nanometre scale represents a transformative change in thermal management.

487 citations

Journal ArticleDOI
TL;DR: The obtained results indicate that the low-frequency noise in combination with other sensing parameters can allow one to achieve the selective gas sensing with a single pristine graphene transistor.
Abstract: We show that vapors of different chemicals produce distinguishably different effects on the low-frequency noise spectra of graphene. It was found in a systematic study that some gases change the electrical resistance of graphene devices without changing their low-frequency noise spectra while other gases modify the noise spectra by inducing Lorentzian components with distinctive features. The characteristic frequency fc of the Lorentzian noise bulges in graphene devices is different for different chemicals and varies from fc = 10–20 Hz to fc = 1300–1600 Hz for tetrahydrofuran and chloroform vapors, respectively. The obtained results indicate that the low-frequency noise in combination with other sensing parameters can allow one to achieve the selective gas sensing with a single pristine graphene transistor. Our method of gas sensing with graphene does not require graphene surface functionalization or fabrication of an array of the devices with each tuned to a certain chemical.

374 citations

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the Raman spectra of single-layer and multi-layer graphene under ultraviolet laser excitation at the wavelength of 325 nm and found that while the G peak of graphene remains pronounced in UV Raman, the 2D band intensity undergoes severe quenching.
Abstract: We investigated Raman spectra of single-layer and multi-layer graphene under ultraviolet laser excitation at the wavelength of 325 nm. It was found that while the G peak of graphene remains pronounced in UV Raman spectra, the 2D band intensity undergoes severe quenching. The evolution of the ratio of the intensities of the G and 2D peaks, I(G)/I(2D), as the number of graphene layers n changes from n=1 to n=5, is different in UV Raman spectra from that in conventional visible Raman spectra excited at the 488 nm and 633 nm wavelengths. The 2D band under UV excitation shifts to larger wave numbers and is found near 2825 1/cm. The observed UV Raman features of graphene were explained by invoking the resonant scattering model. The obtained results contribute to the Raman nanometrology of graphene by providing an additional metric for determining the number of graphene layers and assessing its quality.

243 citations

Journal ArticleDOI
TL;DR: In this article, the authors reported on the experimental investigation of the high-temperature electrical resistance of graphene and fabricated the test structures were fabricated by using the focused ion beam from the single and bilayer graphene produced by mechanical exfoliation.
Abstract: The authors reported on the experimental investigation of the high-temperature electrical resistance of graphene. The test structures were fabricated by using the focused ion beam from the single and bilayer graphene produced by mechanical exfoliation. It was found that as temperature increases from 300to500K, the resistance of the single, and bilayer graphene interconnects drops down by 30% and 70%, respectively. The quenching and temperature dependence of the resistance were explained by the thermal generation of the electron-hole pairs and carrier scattering by acoustic phonons. The obtained results are important for the proposed graphene interconnect applications in integrated circuits.

238 citations

Journal ArticleDOI
TL;DR: In this paper, the authors investigated the Raman spectra of single-layer and multilayer graphene under ultraviolet laser excitation at the wavelength λ =325 nm and found that the 2D band intensity undergoes severe quenching.
Abstract: We investigated Raman spectra of single-layer and multilayer graphene under ultraviolet laser excitation at the wavelength λ=325 nm. It was found that while graphene’s G peak remains pronounced in UV Raman spectra, the 2D-band intensity undergoes severe quenching. The evolution of the ratio of the intensities of the G and 2D peaks, I(G)/I(2D), as the number of graphene layers n changes from n=1 to n=5, is different in UV Raman spectra from that in conventional visible Raman spectra excited at the 488 and 633 nm wavelengths. The 2D band under UV excitation shifts to larger wave numbers and is found near 2825 cm−1. The observed UV Raman features of graphene were explained by invoking the resonant scattering model. The obtained results contribute to the Raman nanometrology of graphene by providing an additional metric for determining the number of graphene layers and assessing its quality.

234 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The thermal properties of carbon materials are reviewed, focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder, with special attention given to the unusual size dependence of heat conduction in two-dimensional crystals.
Abstract: Recent years have seen a rapid growth of interest by the scientific and engineering communities in the thermal properties of materials. Heat removal has become a crucial issue for continuing progress in the electronic industry, and thermal conduction in low-dimensional structures has revealed truly intriguing features. Carbon allotropes and their derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range--of over five orders of magnitude--from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. Here, I review the thermal properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. Special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe the prospects of applications of graphene and carbon materials for thermal management of electronics.

5,189 citations

Journal ArticleDOI
TL;DR: In this paper, the authors review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder.
Abstract: Recent years witnessed a rapid growth of interest of scientific and engineering communities to thermal properties of materials. Carbon allotropes and derivatives occupy a unique place in terms of their ability to conduct heat. The room-temperature thermal conductivity of carbon materials span an extraordinary large range – of over five orders of magnitude – from the lowest in amorphous carbons to the highest in graphene and carbon nanotubes. I review thermal and thermoelectric properties of carbon materials focusing on recent results for graphene, carbon nanotubes and nanostructured carbon materials with different degrees of disorder. A special attention is given to the unusual size dependence of heat conduction in two-dimensional crystals and, specifically, in graphene. I also describe prospects of applications of graphene and carbon materials for thermal management of electronics.

3,609 citations

Journal ArticleDOI
TL;DR: An overview of the key aspects of graphene and related materials, ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries are provided.
Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

2,560 citations

01 Jan 2011

2,117 citations

Journal ArticleDOI
TL;DR: Electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin akin to human skin.
Abstract: Human skin is a remarkable organ. It consists of an integrated, stretchable network of sensors that relay information about tactile and thermal stimuli to the brain, allowing us to maneuver within our environment safely and effectively. Interest in large-area networks of electronic devices inspired by human skin is motivated by the promise of creating autonomous intelligent robots and biomimetic prosthetics, among other applications. The development of electronic networks comprised of flexible, stretchable, and robust devices that are compatible with large-area implementation and integrated with multiple functionalities is a testament to the progress in developing an electronic skin (e-skin) akin to human skin. E-skins are already capable of providing augmented performance over their organic counterpart, both in superior spatial resolution and thermal sensitivity. They could be further improved through the incorporation of additional functionalities (e.g., chemical and biological sensing) and desired properties (e.g., biodegradability and self-powering). Continued rapid progress in this area is promising for the development of a fully integrated e-skin in the near future.

1,950 citations