Guanyi Chen

Bio: Guanyi Chen is an academic researcher from Tianjin University of Commerce. The author has contributed to research in topics: Pyrolysis & Catalysis. The author has an hindex of 44, co-authored 313 publications receiving 6779 citations. Previous affiliations of Guanyi Chen include Delft University of Technology & Georgia Institute of Technology.

Technical review on jet fuel production

Abstract: In present study, we investigated jet fuel production process, including the crude oil-based conventional process, unconventional oil sources-based process, Fischer-Tropsch synthesis (F-T) process and renewable jet fuel process and analyzed the details of each jet fuel production process. Among these jet fuel production technologies, the F-T synthesis and renewable jet fuel process supply alternative fuels with potential environmental benefit of reduced life cycle greenhouse gas (GHG) emissions and the economic benefits associated with increased fuel availability and lower fuel costs. The F-T synthesis has a major advantage with the possibility of accepting any carbon-based input, which makes it suitable for using a variety of sources such as coal, natural gas and 2nd generation biomass as feedstocks. The renewable jet fuel process such as Bio-Synfining (TM) (Syntroleum) and Ecofining (TM) (UOP) as well as C-L (TM) (Tianjin University) is a low capital cost process of producing high quality synthetic paraffinic kerosene (SPK) from bio-renewable feeds like vegetable oils/fats and waste cooking oils/fats, greases, energy plants of jatropha and algal. The SPK has superior fuel properties to other options available today, with higher cetane number, lower cloud point and lower emissions (C) 2013 Published by Elsevier Ltd.

Economic growth and income inequality

Abstract: We investigate whether income inequality affects subsequent growth in a cross-country sample for 1965-90, using the models of Barro (1997), Bleaney and Nishiyama (2002) and Sachs and Warner (1997), with negative results. We then investigate the evolution of income inequality over the same period and its correlation with growth. The dominating feature is inequality convergence across countries. This convergence has been significantly faster amongst developed countries. Growth does not appear to influence the evolution of inequality over time. Outline

An inventory of gaseous and primary aerosol emissions in Asia in the year 2000 : NASA global tropospheric experiment transport and chemical evolution over the pacific (TRACE-P): Measurements and analysis (TRACEP1)

Abstract: [i] An inventory of air pollutant emissions in Asia in the year 2000 is developed to support atmospheric modeling and analysis of observations taken during the TRACE-P experiment funded by the National Aeronautics and Space Administration (NASA) and the ACE-Asia experiment funded by the National Science Foundation (NSF) and the National Oceanic and Atmospheric Administration (NOAA). Emissions are estimated for all major anthropogenic sources, including biomass burning, in 64 regions of Asia. We estimate total Asian emissions as follows: 34.3 Tg SO 2 , 26.8 Tg NO x , 9870 Tg CO 2 , 279 Tg CO, 107 Tg CH 4 , 52.2 Tg NMVOC, 2.54 Tg black carbon (BC), 10.4 Tg organic carbon (OC), and 27.5 Tg NH 3 . In addition, NMVOC are speciated into 19 subcategories according to functional groups and reactivity. Thus we are able to identify the major source regions and types for many of the significant gaseous and particle emissions that influence pollutant concentrations in the vicinity of the TRACE-P and ACE-Asia field measurements. Emissions in China dominate the signature of pollutant concentrations in this region, so special emphasis has been placed on the development of emission estimates for China. China's emissions are determined to be as follows: 20.4 Tg SO 2 , 11.4 Tg NO x , 3820 Tg CO 2 , 116 Tg CO, 38.4 Tg CH 4 , 17.4 Tg NMVOC, 1.05 Tg BC, 3.4 Tg OC, and 13.6 Tg NH 3 . Emissions are gridded at a variety of spatial resolutions from 1° × 1° to 30 s x 30 s, using the exact locations of large point sources and surrogate GIS distributions of urban and rural population, road networks, landcover, ship lanes, etc. The gridded emission estimates have been used as inputs to atmospheric simulation models and have proven to be generally robust in comparison with field observations, though there is reason to think that emissions of CO and possibly BC may be underestimated. Monthly emission estimates for China are developed for each species to aid TRACE-P and ACE-Asia data interpretation. During the observation period of March/ April, emissions are roughly at their average values (one twelfth of annual). Uncertainties in the emission estimates, measured as 95% confidence intervals, range from a low of ±16% for SO 2 to a high of ±450% for OC.

Review of biodiesel composition, properties, and specifications

Abstract: Biodiesel is a renewable transportation fuel consisting of fatty acid methyl esters (FAME), generally produced by transesterification of vegetable oils and animal fats. In this review, the fatty acid (FA) profiles of 12 common biodiesel feedstocks were summarized. Considerable compositional variability exists across the range of feedstocks. For example, coconut, palm and tallow contain high amounts of saturated FA; while corn, rapeseed, safflower, soy, and sunflower are dominated by unsaturated FA. Much less information is available regarding the FA profiles of algal lipids that could serve as biodiesel feedstocks. However, some algal species contain considerably higher levels of poly-unsaturated FA than is typically found in vegetable oils. Differences in chemical and physical properties among biodiesel fuels can be explained largely by the fuels’ FA profiles. Two features that are especially influential are the size distribution and the degree of unsaturation within the FA structures. For the 12 biodiesel types reviewed here, it was shown that several fuel properties – including viscosity, specific gravity, cetane number, iodine value, and low temperature performance metrics – are highly correlated with the average unsaturation of the FAME profiles. Due to opposing effects of certain FAME structural features, it is not possible to define a single composition that is optimum with respect to all important fuel properties. However, to ensure satisfactory in-use performance with respect to low temperature operability and oxidative stability, biodiesel should contain relatively low concentrations of both long-chain saturated FAME and poly-unsaturated FAME.

Hydrogen production from renewable and sustainable energy resources: Promising green energy carrier for clean development

Abstract: Fossil fuel consumption in transportation system and energy-intensive sectors as the principal pillar of civilization is associated with progressive release of greenhouse gases. Hydrogen as a promising energy carrier is a perfect candidate to supply the energy demand of the world and concomitantly reduce toxic emissions. This article gives an overview of the state-of-the-art hydrogen production technologies using renewable and sustainable energy resources. Hydrogen from supercritical water gasification (SCWG) of biomass is the most cost effective thermochemical process. Highly moisturized biomass is utilized directly in SCWG without any high cost drying process. In SCWG, hydrogen is produced at high pressure and small amount of energy is required to pressurize hydrogen in the storage tank. Tar and char formation decreases drastically in biomass SCWG. The low efficiency of solar to hydrogen system as well as expensive photovoltaic cell are the most important barriers for the widespread commercial development of solar-based hydrogen production. Since electricity costs play a crucial role on the final hydrogen price, to generate carbon free hydrogen from solar and wind energy at a competitive price with fossil fuels, the electrical energy cost should be four times less than commercial electricity prices.

Bright Side of Lignin Depolymerization: Toward New Platform Chemicals

Abstract: Lignin, a major component of lignocellulose, is the largest source of aromatic building blocks on the planet and harbors great potential to serve as starting material for the production of biobased products. Despite the initial challenges associated with the robust and irregular structure of lignin, the valorization of this intriguing aromatic biopolymer has come a long way: recently, many creative strategies emerged that deliver defined products via catalytic or biocatalytic depolymerization in good yields. The purpose of this review is to provide insight into these novel approaches and the potential application of such emerging new structures for the synthesis of biobased polymers or pharmacologically active molecules. Existing strategies for functionalization or defunctionalization of lignin-based compounds are also summarized. Following the whole value chain from raw lignocellulose through depolymerization to application whenever possible, specific lignin-based compounds emerge that could be in the fu...