Newness and distinctiveness is claimed in the features of ornamentation as shown inside the broken line circle in the accompanying representation.

Display screen or portion thereof with graphical user interface

Providing various wireless connectivities for vehicles enables the communication between vehicles and their internal and external environments. Such a connected vehicle solution is expected to be the next frontier for automotive revolution and the key to the evolution to next generation intelligent transportation systems (ITSs). Moreover, connected vehicles are also the building blocks of emerging Internet of Vehicles (IoV). Extensive research activities and numerous industrial initiatives have paved the way for the coming era of connected vehicles. In this paper, we focus on wireless technologies and potential challenges to provide vehicle-to-x connectivity. In particular, we discuss the challenges and review the state-of-the-art wireless solutions for vehicle-to-sensor, vehicle-to-vehicle, vehicle-to-Internet, and vehicle-to-road infrastructure connectivities. We also identify future research issues for building connected vehicles.

http://bbcr.uwaterloo.ca/~xshen/paper/2015/cvsac.pdf

Connected Vehicles: Solutions and Challenges

Recent advances in microelectronics and integrated circuits, system-on-chip design, wireless communication and intelligent low-power sensors have allowed the realization of a Wireless Body Area Network (WBAN). A WBAN is a collection of low-power, miniaturized, invasive/non-invasive lightweight wireless sensor nodes that monitor the human body functions and the surrounding environment. In addition, it supports a number of innovative and interesting applications such as ubiquitous healthcare, entertainment, interactive gaming, and military applications. In this paper, the fundamental mechanisms of WBAN including architecture and topology, wireless implant communication, low-power Medium Access Control (MAC) and routing protocols are reviewed. A comprehensive study of the proposed technologies for WBAN at Physical (PHY), MAC, and Network layers is presented and many useful solutions are discussed for each layer. Finally, numerous WBAN applications are highlighted.

/pdf/a-comprehensive-survey-of-wireless-body-area-networks-4zgwb61yeq.pdf

A Comprehensive Survey of Wireless Body Area Networks

More than a decade of research in the field of thermal, motion, vibration and electromagnetic radiation energy harvesting has yielded increasing power output and smaller embodiments. Power management circuits for rectification and DC-DC conversion are becoming able to efficiently convert the power from these energy harvesters. This paper summarizes recent energy harvesting results and their power management circuits.

Micropower energy harvesting

Interest in Wireless Body Area Networks (WBANs) has increased significantly in recent years thanks to the advances in microelectronics and wireless communications. Owing to the very stringent application requirements in terms of reliability, energy efficiency, and low device complexity, the design of these networks requires the definition of new protocols with respect to those used in general purpose wireless sensor networks. This motivates the effort in research activities and in standardisation process of the last years. This survey paper aims at reporting an overview of WBAN main applications, technologies and standards, issues in WBANs design, and evolutions. Some case studies are reported, based on both real implementation and experimentation on the field, and on simulations. These results have the aim of providing useful insights for WBAN designers and of highlighting the main issues affecting the performance of these kind of networks.

A Survey on Wireless Body Area Networks: Technologies and Design Challenges

This paper presents an asynchronous SAR ADC for flexible, low energy radios. To achieve excellent power efficiency for a relatively moderate resolution, various techniques are introduced to reduce the power consumption: custom-designed 0.5 fF unit capacitors minimize the analog power consumption while asynchronous dynamic logic minimizes the digital power consumption. The variability of the custom-designed capacitors is estimated by a specialized CAD tool and verified by chip measurements. An implemented 8-bit prototype in a 90 nm CMOS technology occupies 228 μm × 240 μm including decoupling capacitors, and achieves an ENOB of 7.77 bit at a sampling frequency of 10.24 MS/s. The power consumption equals 26.3 μW from a 1 V supply, thus resulting in an energy efficiency of 12 fJ/conversion-step. Moreover, the fully dynamic design, which is optimized for low-leakage, leads to a standby power consumption of 6 nW. In that way, the energy efficiency of this converter can be maintained down to very low sampling rates.

A 26 $\mu$ W 8 bit 10 MS/s Asynchronous SAR ADC for Low Energy Radios

In order to simultaneously optimize network lifetime and latency in wireless sensor networks (WSN), an always-on wake-up receiver (WuRx) can be used to monitor the radio link continuously. For truly autonomous sensor nodes employing energy scavenging, only 50µW power is available for the WuRx [1]. An envelope detector is a popular choice in WuRx because of its low power consumption. However, the detector is always the bottleneck of the receiver sensitivity since it attenuates low level input signal and adds excessive noise. One way of improving sensitivity is to amplify the signal before the detector, for example at RF [2, 3] or IF [4] stages, to enhance the SNR at the output.

A 2.4GHz/915MHz 51µW wake-up receiver with offset and noise suppression

This paper presents a multistandard ultra-low-power (ULP) 2.36/2.4GHz transceiver for personal and body-area networks (PAN/BAN). The presented radio complies with 3 short-range standards: Bluetooth Low Energy (BT-LE), IEEE802.15.4 (ZigBee) and IEEE802.15.6 (Medical Body-Area Networks, MBAN). A proprietary 2Mb/s mode is also implemented to support data-streaming applications like hearing aids. Current short-range radios for Zigbee and BT-LE typically consume more than 20mW DC power, which is rather high for autonomous systems with limited battery energy. The dual-mode MBAN/BT-LE transceiver achieves a power consumption of 6.5mW for the RX and 5.9mW for the TX by employing a sliding-IF RX and a polar TX architecture. However, it suffers from limited RX image rejection and needs a PA operating at a higher supply voltage. In this paper, an energy-efficient radio architecture with a suitable LO frequency plan is selected, and several efficiency-enhancement techniques for the critical RF circuits (e.g., a push-pull mixer and a digitally-assisted PA) are utilized. As a result, the presented transceiver dissipates only 3.8mW (RX) and 4.6mW (TX) DC power from a 1.2V supply, while exceeding all of the PHY requirements of above 3 standards.

A 1.9nJ/b 2.4GHz multistandard (Bluetooth Low Energy/Zigbee/IEEE802.15.6) transceiver for personal/body-area networks

This paper investigates diversity for dual-antenna systems operating in indoor environments. First, an approximated equation of the diversity gain is derived for different combining techniques. These theoretical results show that the two-term approximation, as generally used in the literature , is too rough an estimate. Consequently, a new six-term approximation is derived. Next, it is demonstrated by a comparison of theoretical and experimental diversity gain values that, due to mutual coupling between the two antennas in practice, the diversity gain will not approach 0 dB if the distance between the two antennas approaches zero. Finally, it is concluded from measurements at 900 MHz that antenna-pattern diversity is a better choice than space diversity for use at handhelds.

/pdf/antenna-pattern-diversity-versus-space-diversity-for-use-at-fww5ot8rj7.pdf

Antenna-pattern diversity versus space diversity for use at handhelds

This paper describes an ultra-low power (ULP) single chip transceiver for wireless body area network (WBAN) applications. It supports on-off keying (OOK) modulation, and it operates in the 2.36-2.4 GHz medical BAN and 2.4-2.485 GHz ISM bands. It is implemented in 90 nm CMOS technology. The direct modulated transmitter transmits OOK signal with 0 dBm peak power, and it consumes 2.59 mW with 50% OOK. The transmitter front-end supports up to 10 Mbps. The transmitter digital baseband enables digital pulse-shaping to improve spectrum efficiency. The super-regenerative receiver front-end supports up to 5 Mbps with -75 dBm sensitivity. Including the digital part, the receiver consumes 715 μW at 1 Mbps data rate, oversampled at 3 MHz. At the system level the transceiver achieves PER=10 -2 at 25 meters line of site with 62.5 kbps data rate and 288 bits packet size. The transceiver is integrated in an electrocardiogram (ECG) necklace to monitor the heart's electrical property.

Guido Dolmans

Papers

A 26 $\mu$ W 8 bit 10 MS/s Asynchronous SAR ADC for Low Energy Radios

A 2.4GHz/915MHz 51µW wake-up receiver with offset and noise suppression

A 1.9nJ/b 2.4GHz multistandard (Bluetooth Low Energy/Zigbee/IEEE802.15.6) transceiver for personal/body-area networks

Antenna-pattern diversity versus space diversity for use at handhelds

A 2.4 GHz ULP OOK Single-Chip Transceiver for Healthcare Applications