Guido Groeseneken

Bio: Guido Groeseneken is an academic researcher from Katholieke Universiteit Leuven. The author has contributed to research in topics: Gate oxide & Electrostatic discharge. The author has an hindex of 73, co-authored 1074 publications receiving 26977 citations. Previous affiliations of Guido Groeseneken include Siemens & Liverpool John Moores University.

A reliable approach to charge-pumping measurements in MOS transistors

Abstract: A new and accurate approach to charge-pumping measurements for the determination of the Si-SiO 2 interface state density directly on MOS transistors is presented. By a careful analysis of the different processes of emission of electrons towards the conduction band and of holes towards the valence band, depending on the charge state of the interface, all the previously ill-understood phenomena can be explained and the deviations from the simple charge-pumping theory can be accounted for. The presence of a geometric component in some transistor configurations is illustrated and the influence of trapping time constants is discussed. Furthermore, based on this insight, a new technique is developed for the determination of the energy distribution of interface states in small-area transistors, without requiring the knowledge of the surface potential dependence on gate voltage.

New insights in the relation between electron trap generation and the statistical properties of oxide breakdown

Abstract: In this paper it is demonstrated in a wide stress field range that breakdown in thin oxide layers occurs as soon as a critical density of neutral electron traps in the oxide is reached. It is proven that this corresponds to a critical hole fluence, since a unique relationship between electron trap generation and hole fluence is found independent of stress field and oxide thickness. In this way literature models relating breakdown to hole fluence or to trap generation are linked. A new model for intrinsic breakdown, based on a percolation concept, is proposed. It is shown that this model can explain the experimentally observed statistical features of the breakdown distribution, such as the increasing spread of the Q/sub BD/-distribution for ultrathin oxides. An important consequence of this large spread is the strong area dependence of the Q/sub BD/ for ultrathin oxides.

Analysis of the charge pumping technique and its application for the evaluation of MOSFET degradation

Abstract: It is shown that the charge pumping technique is able not only to determine the degradation mechanisms in MOS transistors under all kinds of aging conditions (eg, irradiation, hot-carrier, Fowler-Nordheim stress), but also in several cases to evaluate and to quantify the degradation It is further shown that the technique can be applied to separate the presence of fixed oxide changes due to charge trapping and the generation of interface traps It can be used to analyze degradations that occur uniformly over the transistor channel, as well as strongly localized transistor degradations (eg, for the case of hot-carrier degradations) All possible cases of uniform and nonuniform degradations, for p-channel as well as for n-channel transistors, are described, and for most of them experimental examples are given >

Consistent model for the hot-carrier degradation in n-channel and p-channel MOSFETs

Abstract: A model is derived using the charge-pumping technique for the evaluation of the interface characteristics, in combination with the behavior of the drain and the substrate currents after degradation For n-channel transistors the degradation is mainly caused by the generation of interface traps Only in the region of hole injection (V/sub g/ approximately=V/sub t/) is the degradation dominated by the trapped holes, which mask the effect of the generated interface traps The degradation of p-channel transistors, although completely different at first sight, occurs by the same mechanisms For this case, the degradation is caused by trapped negative charge, which masks the influence of the interface traps The latter are nevertheless generated in comparable amounts as in n-channel transistors Based on these insights, improved procedures for accelerated-lifetime experiments are proposed for both channel types Finally, the peculiar degradation behavior of n-channel transistors under alternating injection conditions is discussed and fully explained based on the static stress degradation model >

Tunnel field-effect transistor without gate-drain overlap

Abstract: Tunnel field-effect transistors are promising successors of metal-oxide-semiconductor field-effect transistors because of the absence of short-channel effects and of a subthreshold-slope limit. However, the tunnel devices are ambipolar and, depending on device material properties, they may have low on-currents resulting in low switching speed. The authors have generalized the tunnel field-effect transistor configuration by allowing a shorter gate structure. The proposed device is especially attractive for vertical nanowire-based transistors. As illustrated with device simulations, the authors’ more flexible configuration allows of the reduction of ambipolar behavior, the increase of switching speed, and the decrease of processing complexity.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

High-κ gate dielectrics: Current status and materials properties considerations

Abstract: Many materials systems are currently under consideration as potential replacements for SiO2 as the gate dielectric material for sub-0.1 μm complementary metal–oxide–semiconductor (CMOS) technology. A systematic consideration of the required properties of gate dielectrics indicates that the key guidelines for selecting an alternative gate dielectric are (a) permittivity, band gap, and band alignment to silicon, (b) thermodynamic stability, (c) film morphology, (d) interface quality, (e) compatibility with the current or expected materials to be used in processing for CMOS devices, (f) process compatibility, and (g) reliability. Many dielectrics appear favorable in some of these areas, but very few materials are promising with respect to all of these guidelines. A review of current work and literature in the area of alternate gate dielectrics is given. Based on reported results and fundamental considerations, the pseudobinary materials systems offer large flexibility and show the most promise toward success...

Fundamentals of Modern VLSI Devices

Abstract: Learn the basic properties and designs of modern VLSI devices, as well as the factors affecting performance, with this thoroughly updated second edition. The first edition has been widely adopted as a standard textbook in microelectronics in many major US universities and worldwide. The internationally-renowned authors highlight the intricate interdependencies and subtle tradeoffs between various practically important device parameters, and also provide an in-depth discussion of device scaling and scaling limits of CMOS and bipolar devices. Equations and parameters provided are checked continuously against the reality of silicon data, making the book equally useful in practical transistor design and in the classroom. Every chapter has been updated to include the latest developments, such as MOSFET scale length theory, high-field transport model, and SiGe-base bipolar devices.

Tunnel field-effect transistors as energy-efficient electronic switches

Abstract: Power dissipation is a fundamental problem for nanoelectronic circuits. Scaling the supply voltage reduces the energy needed for switching, but the field-effect transistors (FETs) in today's integrated circuits require at least 60 mV of gate voltage to increase the current by one order of magnitude at room temperature. Tunnel FETs avoid this limit by using quantum-mechanical band-to-band tunnelling, rather than thermal injection, to inject charge carriers into the device channel. Tunnel FETs based on ultrathin semiconducting films or nanowires could achieve a 100-fold power reduction over complementary metal-oxide-semiconductor (CMOS) transistors, so integrating tunnel FETs with CMOS technology could improve low-power integrated circuits.

Metal–Oxide RRAM

Abstract: In this paper, recent progress of binary metal-oxide resistive switching random access memory (RRAM) is reviewed. The physical mechanism, material properties, and electrical characteristics of a variety of binary metal-oxide RRAM are discussed, with a focus on the use of RRAM for nonvolatile memory application. A review of recent development of large-scale RRAM arrays is given. Issues such as uniformity, endurance, retention, multibit operation, and scaling trends are discussed.