Guido Petrini

Bio: Guido Petrini is an academic researcher from Polytechnic University of Turin. The author has contributed to research in topics: Catalysis & Infrared spectroscopy. The author has an hindex of 26, co-authored 45 publications receiving 4334 citations.

Spectroscopic Characterization of Silicalite and Titanium-Silicalite

Abstract: Surface characterization of silicalite and titanium-silicalite is made by combined use of IR and UV-Vis reflectance spectroscopy. The nature of the IR modes and of the electronic transitions associated with framework titanium is discussed in detail. The perturbation caused by the adsorption of small polar molecules (H 2 O, NH 3 , CH 3 OH) on both the IR and UV-Vis spectra is discussed in terms of the formation of six-coordinated complexes by ligand insertion in the Ti(IV) coordination sphere. All the Ti(IV) is accessible to the interaction with the molecules.

DRS UV-Vis and EPR spectroscopy of hydroperoxo and superoxo complexes in titanium silicalite

Abstract: The most important spectroscopic features in the UV-Vis of framework and extraframework Ti(IV) in titanium silicalite are briefly summarized. The spectroscopic manifestations of the complexes formed by framework Ti(IV) in presence of H2O2 are reported. The formation of EPR active species is also considered.

Low-temperature Fourier-transform infrared investigation of the interaction of CO with nanosized ZSM5 and silicalite

Abstract: Nanosized ZSM5 zeolites with microcrystal dimensions in the 20–120 nm range have been characterized by means of IR spectroscopy and HRTEM microscopy. The vibrational spectrum of the OH groups on the external and internal surfaces of H-ZSM5 and Na-ZSM5 samples of different crystallite dimensions has been investigated. For the sake of comparison the spectra of silicalite samples containing different concentrations of sodium and aluminium are also shown. For this purpose high-purity silicalite samples were prepared following a novel synthesis route.Carbon monoxide (a very weak Lewis base) was used to probe the acidity present on the external and internal surfaces of the zeolites through formation of 1 : 1 adducts with silanols (both internal and external), Bronsted-acid groups (both framework and extraframework), Na+ ions, and Lewis Al3+ centres (in extraframework and framework positions). The IR-active CO stretching modes of the complexes are shifted to higher wavenumber with respect to the free molecule; the positive shift can be used to estimate the acid strength. CO that was physically adsorbed in the zeolite channels has also been investigated.

Silicalite characterization. 2. IR spectroscopy of the interaction of carbon monoxide with internal and external hydroxyl groups

Abstract: In paper 1 we have shown that the structural properties of silicalites depend upon the preparation procedure. In particular Na- and Al-free sample (S) prepared following a specifically designed method is characterized by the presence of internal atomic-dimension defects (nanodefects and microcavities). On the basis of spectroscopic data and computer graphic simulations, it is shown that the microcavities derive from one or more missing [SiO 4 ] units and can contain up to four OH groups per missing tetrahedron

From Microporous to Mesoporous Molecular-Sieve Materials and Their Use in Catalysis

Abstract: It is possible to say that zeolites are the most widely used catalysts in industry They are crystalline microporous materials which have become extremely successful as catalysts for oil refining, petrochemistry, and organic synthesis in the production of fine and speciality chemicals, particularly when dealing with molecules having kinetic diameters below 10 A The reason for their success in catalysis is related to the following specific features of these materials:1 (1) They have very high surface area and adsorption capacity (2) The adsorption properties of the zeolites can be controlled, and they can be varied from hydrophobic to hydrophilic type materials (3) Active sites, such as acid sites for instance, can be generated in the framework and their strength and concentration can be tailored for a particular application (4) The sizes of their channels and cavities are in the range typical for many molecules of interest (5-12 A), and the strong electric fields2 existing in those micropores together with an electronic confinement of the guest molecules3 are responsible for a preactivation of the reactants (5) Their intricate channel structure allows the zeolites to present different types of shape selectivity, ie, product, reactant, and transition state, which can be used to direct a given catalytic reaction toward the desired product avoiding undesired side reactions (6) All of these properties of zeolites, which are of paramount importance in catalysis and make them attractive choices for the types of processes listed above, are ultimately dependent on the thermal and hydrothermal stability of these materials In the case of zeolites, they can be activated to produce very stable materials not just resistant to heat and steam but also to chemical attacks Avelino Corma Canos was born in Moncofar, Spain, in 1951 He studied chemistry at the Universidad de Valencia (1967−1973) and received his PhD at the Universidad Complutense de Madrid in 1976 He became director of the Instituto de Tecnologia Quimica (UPV-CSIC) at the Universidad Politecnica de Valencia in 1990 His current research field is zeolites as catalysts, covering aspects of synthesis, characterization and reactivity in acid−base and redox catalysis A Corma has written about 250 articles on these subjects in international journals, three books, and a number of reviews and book chapters He is a member of the Editorial Board of Zeolites, Catalysis Review Science and Engineering, Catalysis Letters, Applied Catalysis, Journal of Molecular Catalysis, Research Trends, CaTTech, and Journal of the Chemical Society, Chemical Communications A Corma is coauthor of 20 patents, five of them being for commercial applications He has been awarded with the Dupont Award on new materials (1995), and the Spanish National Award “Leonardo Torres Quevedo” on Technology Research (1996) 2373 Chem Rev 1997, 97, 2373−2419

State of Understanding of Nafion

Abstract: Equivalent weight (EW) is the number of grams of dry Nafion per mole of sulfonic acid groups when the material is in the acid form. This is an average EW in the sense that the comonomer sequence distribution (that is usually unknown to the investigator and largely unreported) gives a distribution in m in this formula. EW can be ascertained by acid-base titration, by analysis of atomic sulfur, and by FT-IR spectroscopy. The relationship between EW and m is EW ) 100m + 446 so that, for example, the side chains are separated by around 14 CF2 units in a membrane of 1100 EW. Common at the time of this writing are Nafion 117 films. The designation “117” refers to a film having 1100 EW and a nominal thickness of 0.007 in., although 115 and 112 films have also been available. Early-reported studies involved 1200 EW samples as well as special experimental varieties, some being rather thin. The equivalent weight is related to the property more often seen in the field of conventional ion exchange resins, namely the ion exchange capacity (IEC), by the equation IEC ) 1000/EW. The mention of the molecular weight of high equivalent weight (EW > 1000 g‚mol-1) Nafion is almost absent in the literature, although the range 105-106 Da has been mentioned. As this polymer does not form true solutions, the common methods of light scattering and gel permeation chromatography cannot be used to determine molecular weight as well as the size and shape of isolated, truly dissolved molecules. Studies of the structure of this polymer in solvent (albeit not a true solution) will be mentioned in the scattering section of this review. It should be noted that Curtin et al. performed size exclusion chromatography determinations of the molecular weight distribution in Nafion aqueous dispersions after they were heated to high temperatures (230, 250, and 270 °C).1 Before heating, there was a high molecular weight shoulder on a bimodal distribution, due to molecular aggregates, but this shoulder disappeared upon heating, which indicated that the aggregates were disrupted. The peaks for the monomodal distribution for the heated samples were all located at molecular weights slightly higher than 105 g‚mol-1. Also, light scattering experiments revealed that the radius of gyration had a linear dependence on the molar mass of the aggregates, which suggests that the particles are in the form of rods or ribbons, or at least some elongated structure. Nafion ionomers are usually derived from the thermoplastic -SO2F precursor form that can be extruded into sheets of required thickness. Strong interactions between the ionic groups are an obstacle to melt processing. This precursor does not possess the clustered morphology that will be of great concern in this article but does possess Teflon-like crystallinity which persists when the sulfonyl fluoride form is converted to, for example, the K+ form by reacting it with KOH in water and DMSO. Thereafter, the -SO3H form is achieved by soaking the film in a sufficiently concentrated aqueous acid solution. Extrusion of the sulfonyl fluoride precursor can cause microstructural orientation in the machine direction, * Address correspondence to either author. Phone: 601-266-5595/ 4480. Fax: 601-266-5635. E-mail: Kenneth.Mauritz@usm.edu; RBMoore@usm.edu. 4535 Chem. Rev. 2004, 104, 4535−4585

Conversion of Methanol to Hydrocarbons: How Zeolite Cavity and Pore Size Controls Product Selectivity

Abstract: Liquid hydrocarbon fuels play an essential part in the global energy chain, owing to their high energy density and easy transportability. Olefins play a similar role in the production of consumer goods. In a post-oil society, fuel and olefin production will rely on alternative carbon sources, such as biomass, coal, natural gas, and CO(2). The methanol-to-hydrocarbons (MTH) process is a key step in such routes, and can be tuned into production of gasoline-rich (methanol to gasoline; MTG) or olefin-rich (methanol to olefins; MTO) product mixtures by proper choice of catalyst and reaction conditions. This Review presents several commercial MTH projects that have recently been realized, and also fundamental research into the synthesis of microporous materials for the targeted variation of selectivity and lifetime of the catalysts.

New Insights into Perfluorinated Sulfonic-Acid Ionomers

Abstract: In this comprehensive review, recent progress and developments on perfluorinated sulfonic-acid (PFSA) membranes have been summarized on many key topics. Although quite well investigated for decades, PFSA ionomers’ complex behavior, along with their key role in many emerging technologies, have presented significant scientific challenges but also helped create a unique cross-disciplinary research field to overcome such challenges. Research and progress on PFSAs, especially when considered with their applications, are at the forefront of bridging electrochemistry and polymer (physics), which have also opened up development of state-of-the-art in situ characterization techniques as well as multiphysics computation models. Topics reviewed stem from correlating the various physical (e.g., mechanical) and transport properties with morphology and structure across time and length scales. In addition, topics of recent interest such as structure/transport correlations and modeling, composite PFSA membranes, degradat...