Guy Applerot

Bio: Guy Applerot is an academic researcher from Bar-Ilan University. The author has contributed to research in topics: Nanoparticle & Antibacterial activity. The author has an hindex of 13, co-authored 14 publications receiving 2664 citations. Previous affiliations of Guy Applerot include Center for Advanced Materials.

Enhanced Antibacterial Activity of Nanocrystalline ZnO Due to Increased ROS-Mediated Cell Injury

Abstract: An innovative study aimed at understanding the influence of the particle size of ZnO (from the microscale down to the nanoscale) on its antibacterial effect is reported herein. The antibacterial activity of ZnO has been found to be due to a reaction of the ZnO surface with water. Electron-spin resonance measurements reveal that aqueous suspensions of small nanoparticles of ZnO produce increased levels of reactive oxygen species, namely hydroxyl radicals. Interestingly, a remarkable enhancement of the oxidative stress, beyond the level yielded by the ZnO itself, is detected following the antibacterial treatment. Likewise, an exposure of bacteria to the small ZnO nanoparticles results in an increased cellular internalization of the nanoparticles and bacterial cell damage. An examination of the antibacterial effect is performed on two bacterial species: Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive). The nanocrystalline particles of ZnO are synthesized using ultrasonic irradiation, and the particle sizes are controlled using different solvents during the sonication process. Taken as a whole, it is apparent that the unique properties (i.e., small size and corresponding large specific surface area) of small nanometer-scale ZnO particles impose several effects that govern its antibacterial action. These effects are size dependent and do not exist in the range of microscale particles.

Understanding the Antibacterial Mechanism of CuO Nanoparticles: Revealing the Route of Induced Oxidative Stress

Abstract: To date, there is still a lack of definite knowledge regarding the interaction of CuO nanoparticles with bacteria and the possible permeation of the nanoparticles into bacterial cells. This study was aimed at shedding light on the size-dependent (from the microscale down to the small nanoscale) antibacterial activity of CuO. The potent antibacterial activity of CuO nanoparticles was found to be due to ROS-generation by the nanoparticles attached to the bacterial cells, which in turn provoked an enhancement of the intracellular oxidative stress. This paradigm was confirmed by several assays such as lipid peroxidation and reporter strains of oxidative stress. Furthermore, electron microscopy indicated that the small nanoparticles of CuO penetrated the cells. Collectively, the results reported herein may reconcile conflicting concepts in the literature concerning the antibacterial mechanism of CuO nanoparticles, as well as highlight the potential for developing sustainable CuO nanoparticles-based devices for inhibiting bacterial infections.

Sonochemical coating of silver nanoparticles on textile fabrics (nylon, polyester and cotton) and their antibacterial activity.

Abstract: Silver nanoparticles were synthesized and deposited on different types of fabrics using ultrasound irradiation. The structure of silver-fabric composites was studied by physico-chemical methods. The mechanism of the strong adhesion of silver nanoparticles to the fibers is discussed. The excellent antibacterial activity of the Ag-fabric composite against Escherichia coli (gram-negative) and Staphylococcus aureus (gram-positive) cultures was demonstrated.

CuO–cotton nanocomposite: Formation, morphology, and antibacterial activity

Abstract: Copper oxide nanoparticles were synthesized and subsequently deposited on the surface of cotton fabrics using ultrasound irradiation. Optimization of the process resulted in a homogeneous distribution of CuO nanocrystals, 15 nm in size, on the fabric surface. The antibacterial activities of the CuO–fabric composite were tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) cultures. A significant bactericidal effect, even in a 1% coated fabric (%wt.), was demonstrated.

Antibacterial properties of an in situ generated and simultaneously deposited nanocrystalline ZnO on fabrics.

Abstract: Zinc oxide (ZnO) nanoparticles were synthesized and deposited on the surface of cotton fabrics using ultrasound irradiation. Optimization of the process resulted in a homogeneous distribution of ZnO nanocrystals, 30 nm in size, on the fabric surface. The mechanism of the ultrasound-assisted coating was proposed. The antibacterial activities of the ZnO−fabric composite were tested against Escherichia coli (Gram negative) and Staphylococcus aureus (Gram positive) cultures. A significant bactericidal effect, even in a 0.75% coated fabric (wt %), was demonstrated.

Review on Zinc Oxide Nanoparticles: Antibacterial Activity and Toxicity Mechanism.

Abstract: Antibacterial activity of zinc oxide nanoparticles (ZnO-NPs) has received significant interest worldwide particularly by the implementation of nanotechnology to synthesize particles in the nanometer region. Many microorganisms exist in the range from hundreds of nanometers to tens of micrometers. ZnO-NPs exhibit attractive antibacterial properties due to increased specific surface area as the reduced particle size leading to enhanced particle surface reactivity. ZnO is a bio-safe material that possesses photo-oxidizing and photocatalysis impacts on chemical and biological species. This review covered ZnO-NPs antibacterial activity including testing methods, impact of UV illumination, ZnO particle properties (size, concentration, morphology, and defects), particle surface modification, and minimum inhibitory concentration. Particular emphasize was given to bactericidal and bacteriostatic mechanisms with focus on generation of reactive oxygen species (ROS) including hydrogen peroxide (H2O2), OH− (hydroxyl radicals), and O2 −2 (peroxide). ROS has been a major factor for several mechanisms including cell wall damage due to ZnO-localized interaction, enhanced membrane permeability, internalization of NPs due to loss of proton motive force and uptake of toxic dissolved zinc ions. These have led to mitochondria weakness, intracellular outflow, and release in gene expression of oxidative stress which caused eventual cell growth inhibition and cell death. In some cases, enhanced antibacterial activity can be attributed to surface defects on ZnO abrasive surface texture. One functional application of the ZnO antibacterial bioactivity was discussed in food packaging industry where ZnO-NPs are used as an antibacterial agent toward foodborne diseases. Proper incorporation of ZnO-NPs into packaging materials can cause interaction with foodborne pathogens, thereby releasing NPs onto food surface where they come in contact with bad bacteria and cause the bacterial death and/or inhibition.

Antifouling coatings: recent developments in the design of surfaces that prevent fouling by proteins, bacteria, and marine organisms.

Abstract: The major strategies for designing surfaces that prevent fouling due to proteins, bacteria, and marine organisms are reviewed. Biofouling is of great concern in numerous applications ranging from biosensors to biomedical implants and devices, and from food packaging to industrial and marine equipment. The two major approaches to combat surface fouling are based on either preventing biofoulants from attaching or degrading them. One of the key strategies for imparting adhesion resistance involves the functionalization of surfaces with poly(ethylene glycol) (PEG) or oligo(ethylene glycol). Several alternatives to PEG-based coatings have also been designed over the past decade. While protein-resistant coatings may also resist bacterial attachment and subsequent biofilm formation, in order to overcome the fouling-mediated risk of bacterial infection it is highly desirable to design coatings that are bactericidal. Traditional techniques involve the design of coatings that release biocidal agents, including antibiotics, quaternary ammonium salts (QAS), and silver, into the surrounding aqueous environment. However, the emergence of antibiotic- and silver-resistant pathogenic strains has necessitated the development of alternative strategies. Therefore, other techniques based on the use of polycations, enzymes, nanomaterials, and photoactive agents are being investigated. With regard to marine antifouling coatings, restrictions on the use of biocide-releasing coatings have made the generation of nontoxic antifouling surfaces more important. While considerable progress has been made in the design of antifouling coatings, ongoing research in this area should result in the development of even better antifouling materials in the future.

Antimicrobial activity of metals: mechanisms, molecular targets and applications

Abstract: Metals have been used as antimicrobial agents since antiquity, but throughout most of history their modes of action have remained unclear. Recent studies indicate that different metals cause discrete and distinct types of injuries to microbial cells as a result of oxidative stress, protein dysfunction or membrane damage. Here, we describe the chemical and toxicological principles that underlie the antimicrobial activity of metals and discuss the preferences of metal atoms for specific microbial targets. Interdisciplinary research is advancing not only our understanding of metal toxicity but also the design of metal-based compounds for use as antimicrobial agents and alternatives to antibiotics.