scispace - formally typeset
Search or ask a question
Author

H. Nguyen-Van

Bio: H. Nguyen-Van is an academic researcher from Centre national de la recherche scientifique. The author has contributed to research in topics: Operating temperature & Photonics. The author has an hindex of 2, co-authored 2 publications receiving 45 citations.

Papers
More filters
Journal ArticleDOI
08 May 2018
TL;DR: The first quantum cascade lasers (QCLs) directly grown on a silicon substrate exhibit high performances, comparable with those of the devices fabricated on their native InAs substrate, and open the way to the development of a wide variety of integrated sensors.
Abstract: We report the first quantum cascade lasers directly grown on a silicon substrate. These lasers are based on the InAs/AlSb material system and exhibit high performances, comparable with those of the devices fabricated on their native InAs substrate. The lasers operate near 11 μm, the longest emission wavelength of any laser integrated on Si.

62 citations

Journal ArticleDOI
TL;DR: In this paper, the authors proposed to modify the three well resonant phonon design by increasing the energy of the separation between the bottom transition levels and the ground states, which is usually adjusted to the LO-phonon energy in GaAs.
Abstract: In order to improve the maximum operating temperature of THz quantum cascade lasers (QCLs) we propose to modify the three well resonant phonon design by increasing the energy of the separation between the bottom transition levels and the ground states, which is usually adjusted to the LO-phonon energy in GaAs. The fabricated devices based on this design with non-resonant depopulation of the bottom transition level operated in pulsed mode up to 190K, which is the best-reported performance for THz QCLs with Al0.15Ga0.85As barriers based on an Au-Au double-metal waveguide. The performed analysis showed that the achieved improvement could be explained by the proposed design modification.In order to improve the maximum operating temperature of THz quantum cascade lasers (QCLs) we propose to modify the three well resonant phonon design by increasing the energy of the separation between the bottom transition levels and the ground states, which is usually adjusted to the LO-phonon energy in GaAs. The fabricated devices based on this design with non-resonant depopulation of the bottom transition level operated in pulsed mode up to 190K, which is the best-reported performance for THz QCLs with Al0.15Ga0.85As barriers based on an Au-Au double-metal waveguide. The performed analysis showed that the achieved improvement could be explained by the proposed design modification.

9 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, a high performance MIR photodetector directly grown on silicon by molecular beam epitaxy was reported. But the authors did not specify the growth procedure of the Si platform.
Abstract: Mid-infrared (MIR) silicon photonics holds the potential for realizing next generation ultracompact spectroscopic systems for applications in gas sensing, defense, and medical diagnostics. The direct epitaxial growth of antimonide-based compound semiconductors on silicon provides a promising approach for extending the wavelength of silicon photonics to the longer infrared range. This paper reports on the fabrication of a high performance MIR photodetector directly grown onto silicon by molecular beam epitaxy. The device exhibited an extended cutoff wavelength at ∼5.5 μm and a dark current density of 1.4 × 10–2 A/cm2 under 100 mV reverse bias at 200 K. A responsivity of 0.88 A/W and a specific detectivity in the order of 1.5 × 1010 Jones was measured at 200 K under 100 mV reverse bias operation. These results were achieved through the development of an innovative structure which incorporates a type-II InAs/InAsSb superlattice-based barrier nBn photodetector grown on a GaSb-on-silicon buffer layer. The difficulties in growing GaSb directly on silicon were overcome using a novel growth procedure consisting of an efficient AlSb interfacial misfit array, a two-step growth temperature procedure and dislocation filters resulting in a low defect density, antiphase domain free GaSb epitaxial layer on silicon. This work demonstrates that complex superlattice-based MIR photodetectors can be directly integrated onto a Si platform, which provides a pathway toward the realization of new, high performance, large area focal plane arrays and mid-infrared integrated photonic circuits.

45 citations

Journal ArticleDOI
TL;DR: In this article, the authors review the history, development, design principles, experimental operating characteristics, and specialized architectures of interband cascade lasers for the mid-wave infrared spectral region and provide a perspective on the potential for future improvements.
Abstract: We review the history, development, design principles, experimental operating characteristics, and specialized architectures of interband cascade lasers for the mid-wave infrared spectral region. We discuss the present understanding of the mechanisms limiting the ICL performance and provide a perspective on the potential for future improvements. Such device properties as the threshold current and power densities, continuous-wave output power, and wall-plug efficiency are compared with those of the quantum cascade laser. Newer device classes such as ICL frequency combs, interband cascade vertical-cavity surface-emitting lasers, interband cascade LEDs, interband cascade detectors, and integrated ICLs are reviewed for the first time.

42 citations

Journal ArticleDOI
20 Apr 2020
TL;DR: In this paper, the first mid-infrared semiconductor laser was grown on on on-axis Si substrates, and the GaSb-based laser diodes demonstrated low threshold current density, low optical losses, high temperature operation, and high characteristic temperatures.
Abstract: The direct epitaxial growth of III-V semiconductor lasers on standard, CMOS-compatible, on-axis (001) Si substrates is actively sought for the realization of active photonic integrated circuits. Here we report on the first mid-infrared semiconductor laser epitaxially grown on on-axis Si substrates, i.e., compatible with industry standards. Furthermore, these GaSb-based laser diodes demonstrate low threshold current density, low optical losses, high temperature operation, and high characteristic temperatures. These results represent a breakthrough toward the integration of semiconductor laser sources on Si for smart sensors.

41 citations

Journal ArticleDOI
TL;DR: In this article, a 2D excitonic solar cell based on staggered type-II van der Waals (vdW) hetero-bilayers comprising of semiconducting ZrS3 monolayer and monolayers of MS2 and MXY (M Mo, W; X, Y S, Se, Te; X ≠ Y) are reported, using DFT-D2 and HSE06 functional.

40 citations

Journal ArticleDOI
TL;DR: In this paper, a mid-wave infrared (MWIR) Ga-free InAs/InAsSb superlattice (SL) barrier detector is demonstrated on a Si substrate by molecular beam epitaxy.

28 citations