scispace - formally typeset
Search or ask a question
Author

Haiyan Sun

Bio: Haiyan Sun is an academic researcher from Zhejiang University. The author has contributed to research in topics: Graphene & Carbon. The author has an hindex of 15, co-authored 23 publications receiving 4398 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: All carbon aerogels with ultralow density and temperature-invariant super-elasticity are fabricated by facile assembling of commercial carbon nanotubes and chemically-converted giant graphene sheets, on the basis of the synergistic effect between elastic CNTs ribs and giant graphene cell walls.
Abstract: All carbon aerogels (up to 1000 cm(3)) with ultralow density (down to 0.16 mg cm(-3)) and temperature-invariant (-190-900 °C) super-elasticity are fabricated by facile assembling of commercial carbon nanotubes (CNTs) and chemically-converted giant graphene sheets, on the basis of the synergistic effect between elastic CNTs ribs and giant graphene cell walls.

1,680 citations

Journal ArticleDOI
TL;DR: A coaxial wet-spinning assembly approach to continuously spin polyelectrolyte-wrapped graphene/carbon nanotube core-sheath fibres, which are used directly as safe electrodes to assembly two-ply yarn supercapacitors, paves the way to wearable and safe electronics.
Abstract: High-energy yarn supercapacitors are desirable for safe and wearable electronics. Here, Kou et al. use a coaxial wet-spinning assembly method to fabricate core-sheath fibres of polymer-wrapped carbon nanomaterials and demonstrate high-performance supercapacitor applications.

976 citations

Journal ArticleDOI
TL;DR: The giant size and regular alignment of graphene sheets render the fibers with high mechanical strength and good conductivity, which promise wide applications in functional textiles, flexible and wearable sensors, and supercapacitor devices.
Abstract: Continuous, ultrastrong graphene fibers are achieved by wet-spinning of giant graphene oxide liquid crystals, followed by wet-drawing and ion-cross-linking. The giant size and regular alignment of graphene sheets render the fibers with high mechanical strength and good conductivity. Such graphene fibers promise wide applications in functional textiles, flexible and wearable sensors, and supercapacitor devices.

607 citations

Journal ArticleDOI
Li Peng1, Zhen Xu1, Zheng Liu1, Wei Yangyang1, Haiyan Sun1, Zheng Li1, Xiaoli Zhao1, Chao Gao1 
TL;DR: This paper reports an iron-based green strategy for the production of single-layer GO using the strong oxidant K2FeO4, which not only avoids the introduction of polluting heavy metals and toxic gases in preparation and products but also enables the recycling of sulphuric acid, eliminating pollution.
Abstract: As a reliable and scalable precursor of graphene, graphene oxide (GO) is of great importance. However, the environmentally hazardous heavy metals and poisonous gases, explosion risk and long reaction times involved in the current synthesis methods of GO increase the production costs and hinder its real applications. Here we report an iron-based green strategy for the production of single-layer GO in 1 h. Using the strong oxidant K2FeO4, our approach not only avoids the introduction of polluting heavy metals and toxic gases in preparation and products but also enables the recycling of sulphuric acid, eliminating pollution. Our dried GO powder is highly soluble in water, in which it forms liquid crystals capable of being processed into macroscopic graphene fibres, films and aerogels. This green, safe, highly efficient and ultralow-cost approach paves the way to large-scale commercial applications of graphene. Oxidants currently used in the preparation of graphene oxide (GO) require long reaction times, relatively high temperatures and costly waste treatment. Here, the authors propose the use of a strong green oxidant, K2FeO4, establishing a fast, safe, toxicity-free route to GO production.

363 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: An overview of the key aspects of graphene and related materials, ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries are provided.
Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

2,560 citations

Journal ArticleDOI
TL;DR: The principles and methods of designing and optimizing electrolytes for ES performance and application are highlighted through a comprehensive analysis of the literature, and challenges in producing high-performing electrolytes are analyzed.
Abstract: Electrolytes have been identified as some of the most influential components in the performance of electrochemical supercapacitors (ESs), which include: electrical double-layer capacitors, pseudocapacitors and hybrid supercapacitors. This paper reviews recent progress in the research and development of ES electrolytes. The electrolytes are classified into several categories, including: aqueous, organic, ionic liquids, solid-state or quasi-solid-state, as well as redox-active electrolytes. Effects of electrolyte properties on ES performance are discussed in detail. The principles and methods of designing and optimizing electrolytes for ES performance and application are highlighted through a comprehensive analysis of the literature. Interaction among the electrolytes, electro-active materials and inactive components (current collectors, binders, and separators) is discussed. The challenges in producing high-performing electrolytes are analyzed. Several possible research directions to overcome these challenges are proposed for future efforts, with the main aim of improving ESs' energy density without sacrificing existing advantages (e.g., a high power density and a long cycle-life) (507 references).

2,480 citations

Journal ArticleDOI
TL;DR: All carbon aerogels with ultralow density and temperature-invariant super-elasticity are fabricated by facile assembling of commercial carbon nanotubes and chemically-converted giant graphene sheets, on the basis of the synergistic effect between elastic CNTs ribs and giant graphene cell walls.
Abstract: All carbon aerogels (up to 1000 cm(3)) with ultralow density (down to 0.16 mg cm(-3)) and temperature-invariant (-190-900 °C) super-elasticity are fabricated by facile assembling of commercial carbon nanotubes (CNTs) and chemically-converted giant graphene sheets, on the basis of the synergistic effect between elastic CNTs ribs and giant graphene cell walls.

1,680 citations

Journal ArticleDOI
Wei Zeng1, Lin Shu1, Qiao Li1, Song Chen1, Fei Wang1, Xiaoming Tao1 
TL;DR: This article attempts to critically review the current state-of-arts with respect to materials, fabrication techniques, and structural design of devices as well as applications of the fiber-based wearable electronic products.
Abstract: Fiber-based structures are highly desirable for wearable electronics that are expected to be light-weight, long-lasting, flexible, and conformable Many fibrous structures have been manufactured by well-established lost-effective textile processing technologies, normally at ambient conditions The advancement of nanotechnology has made it feasible to build electronic devices directly on the surface or inside of single fibers, which have typical thickness of several to tens microns However, imparting electronic functions to porous, highly deformable and three-dimensional fiber assemblies and maintaining them during wear represent great challenges from both views of fundamental understanding and practical implementation This article attempts to critically review the current state-of-arts with respect to materials, fabrication techniques, and structural design of devices as well as applications of the fiber-based wearable electronic products In addition, this review elaborates the performance requirements of the fiber-based wearable electronic products, especially regarding the correlation among materials, fiber/textile structures and electronic as well as mechanical functionalities of fiber-based electronic devices Finally, discussions will be presented regarding to limitations of current materials, fabrication techniques, devices concerning manufacturability and performance as well as scientific understanding that must be improved prior to their wide adoption

1,626 citations

Journal ArticleDOI
TL;DR: The broadband and tunable high-performance microwave absorption properties of an ultralight and highly compressible graphene foam (GF) are investigated and it is shown that via physical compression, the microwave absorption performance can be tuned.
Abstract: The broadband and tunable high-performance microwave absorption properties of an ultralight and highly compressible graphene foam (GF) are investigated. Simply via physical compression, the microwave absorption performance can be tuned. The qualified bandwidth coverage of 93.8% (60.5 GHz/64.5 GHz) is achieved for the GF under 90% compressive strain (1.0 mm thickness). This mainly because of the 3D conductive network.

1,533 citations