Author
Hamid Garmestani
Other affiliations: Cornell University, Florida A&M University – Florida State University College of Engineering, Florida State University
Bio: Hamid Garmestani is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Microstructure & Texture (crystalline). The author has an hindex of 41, co-authored 258 publications receiving 6293 citations. Previous affiliations of Hamid Garmestani include Cornell University & Florida A&M University – Florida State University College of Engineering.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the thermal and electrical properties of single wall carbon nanotube (CNT)-polymer composites are significantly enhanced by magnetic alignment during processing, and the electrical transport properties are mainly governed by the hopping conduction with localization lengths comparable to bundle diameters.
Abstract: We show that the thermal and electrical properties of single wall carbon nanotube (CNT)-polymer composites are significantly enhanced by magnetic alignment during processing. The electrical transport properties of the composites are mainly governed by the hopping conduction with localization lengths comparable to bundle diameters. The bundling of nanotubes during the composite processing is an important factor for electrical, and in particular, for thermal transport properties. Better CNT isolation will be needed to reach the theoretical thermal conductivity limit for CNT composites.
542 citations
••
TL;DR: In this article, the effect of orientation and alignment of carbon nanotubes (CNTs) embedded in an epoxy polymer matrix under a magnetic field on the mechanical properties of the resulting nanocomposite was investigated.
197 citations
••
173 citations
••
TL;DR: In this article, the authors considered polycrystalline microstructure as a continuous design variable and used a spectral representation space for the design of a compliant fixed-guided beam.
Abstract: We show that mechanical design can be conducted where consideration of polycrystalline microstructure as a continuous design variable is facilitated by use of a spectral representation space. Design of a compliant fixed-guided beam is used as a case study to illustrate the main tenets of the new approach, called microstructure-sensitive design (MSD). Selection of the mechanical framework for the design (e.g., mechanical constitutive model) dictates the dimensionality of the pertinent representation. Microstructure is considered to be comprised of basic elements that belong to the material set. For the compliant beam problem, these are uni-axial distribution functions. The universe of pertinent microstructures is found to be the convex hull of the material set, and is named the material hull. Design performance, in terms of specified design objectives and constraints, is represented by one or more surfaces (often hyperplanes) of finite dimension that intersect the material hull. Thus, the full range of microstructure, and concomitant design performance, can be exploited for any material class. Optimal placement of the salient iso-property surfaces within the material hull dictates the optimal set of microstructures for the problem. Extensions of MSD to highly constrained design problems of higher dimension is also described.
154 citations
••
TL;DR: In this paper, a novel design of dielectric composites consisting of core-shell structured porous Ni@BaTiO3 scaffolds infiltrated with epoxy was developed, and it was demonstrated that the dielectrics of the composites could be as high as 6397@10 kHz, which is approximately 1777 times higher than pure epoxy matrix (er.
Abstract: Dielectric composites have drawn increasing attention owing to their wide applications in electrical systems. Herein, a novel design of dielectric composites consisting of core-shell structured porous Ni@BaTiO3 scaffolds infiltrated with epoxy was developed. It is demonstrated that the dielectric constants of the composites could be as high as 6397@10 kHz, which is approximately 1777 times higher than pure epoxy matrix (er ≈ 3.6@10 kHz). Meanwhile, the dielectric loss (tanδ ≈ 0.04@10 kHz) remains comparable to that of pure epoxy (tanδ ≈ 0.01@10 kHz). It is believed that the strong charge accumulation and interfacial polarizations on the huge interfaces, especially the Ni/BaTiO3 and Ni/epoxy interfaces, give arise to the substantially enhanced er. Besides, the sintered insulating BaTiO3 coating can block the transportation of charge carriers, resulting in the low loss. The ultrahigh dielectric constants and low loss make these composites promising candidates for microstrip antennas, field-effect transistors and dielectric capacitors.
143 citations
Cited by
More filters
••
TL;DR: The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or her own research.
Abstract: I have developed "tennis elbow" from lugging this book around the past four weeks, but it is worth the pain, the effort, and the aspirin. It is also worth the (relatively speaking) bargain price. Including appendixes, this book contains 894 pages of text. The entire panorama of the neural sciences is surveyed and examined, and it is comprehensive in its scope, from genomes to social behaviors. The editors explicitly state that the book is designed as "an introductory text for students of biology, behavior, and medicine," but it is hard to imagine any audience, interested in any fragment of neuroscience at any level of sophistication, that would not enjoy this book. The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or
7,563 citations
••
TL;DR: Nanoalloys of Group 11 (Cu, Ag, Au) 865 5.1.5.2.
Abstract: 5.1. Nanoalloys of Group 11 (Cu, Ag, Au) 865 5.1.1. Cu−Ag 866 5.1.2. Cu−Au 867 5.1.3. Ag−Au 870 5.1.4. Cu−Ag−Au 872 5.2. Nanoalloys of Group 10 (Ni, Pd, Pt) 872 5.2.1. Ni−Pd 872 * To whom correspondence should be addressed. Phone: +39010 3536214. Fax:+39010 311066. E-mail: ferrando@fisica.unige.it. † Universita di Genova. ‡ Argonne National Laboratory. § University of Birmingham. | As of October 1, 2007, Chemical Sciences and Engineering Division. Volume 108, Number 3
3,114 citations
••
TL;DR: In this paper, an extended account of the various chemical strategies for grafting polymers onto carbon nanotubes and the manufacturing of carbon-nanotube/polymer nanocomposites is given.
2,766 citations
••
TL;DR: In this article, the status of worldwide research in the thermal conductivity of carbon nanotubes and their polymer nanocomposites is reviewed, as well as the relationship between thermal conductivities and the micro- and nano-structure of the composites.
2,102 citations
••
TL;DR: A review on fluid flow and heat transfer characteristics of nanofluids in forced and free convection flows is presented in this article, where the authors identify opportunities for future research.
1,988 citations