Additive manufacturing, otherwise known as three-dimensional (3D) printing, is driving major innovations in many areas, such as engineering, manufacturing, art, education and medicine. Recent advances have enabled 3D printing of biocompatible materials, cells and supporting components into complex 3D functional living tissues. 3D bioprinting is being applied to regenerative medicine to address the need for tissues and organs suitable for transplantation. Compared with non-biological printing, 3D bioprinting involves additional complexities, such as the choice of materials, cell types, growth and differentiation factors, and technical challenges related to the sensitivities of living cells and the construction of tissues. Addressing these complexities requires the integration of technologies from the fields of engineering, biomaterials science, cell biology, physics and medicine. 3D bioprinting has already been used for the generation and transplantation of several tissues, including multilayered skin, bone, vascular grafts, tracheal splints, heart tissue and cartilaginous structures. Other applications include developing high-throughput 3D-bioprinted tissue models for research, drug discovery and toxicology.

3D bioprinting of tissues and organs

Since the discovery of highly conducting polyacetylene by Shirakawa, MacDiarmid, and Heeger in 1977, π-conjugated systems have attracted much attention as futuristic materials for the development and production of the next generation of electronics, that is, organic electronics. Conceptually, organic electronics are quite different from conventional inorganic solid state electronics because the structural versatility of organic semiconductors allows for the incorporation of functionality by molecular design. This versatility leads to a new era in the design of electronic devices. To date, the great number of π-conjugated semiconducting materials that have either been discovered or synthesized generate an exciting library of π-conjugated systems for use in organic electronics. 11 However, some key challenges for further advancement remain: the low mobility and stability of organic semiconductors, the lack of knowledge regarding structure property relationships for understanding the fundamental chemical aspects behind the structural design, and realization of desired properties. Organic field-effect transistors (OFETs) are a kind of device consisting of an organic semiconducting layer, a gate insulator layer, and three terminals (drain, source, and gate electrodes). OFETs are not only essential building blocks for the next generation of cheap and flexible organic circuits, but they also provide an important insight into the charge transport of πconjugated systems. Therefore, they act as strong tools for the exploration of the structure property relationships of πconjugated systems, such as parameters of field-effect mobility (μ, the drift velocity of carriers under unit electric field), current on/off ratio (the ratio of the maximum on-state current to the minimum off-state current), and threshold voltage (the minimum gate voltage that is required to turn on the transistor). 17 Since the discovery of OFETs in the 1980s, they have attracted much attention. Research onOFETs includes the discovery, design, and synthesis of π-conjugated systems for OFETs, device optimization, development of applications in radio frequency identification (RFID) tags, flexible displays, electronic papers, sensors, and so forth. It is beyond the scope of this review to cover all aspects of π-conjugated systems; hence, our focus will be on the performance analysis of π-conjugated systems in OFETs. This should make it possible to extract information regarding the fundamental merit of semiconducting π-conjugated materials and capture what is needed for newmaterials and what is the synthesis orientation of newπ-conjugated systems. In fact, for a new science with many practical applications, the field of organic electronics is progressing extremely rapidly. For example, using “organic field effect transistor” or “organic field effect transistors” as the query keywords to search the Web of Science citation database, it is possible to show the distribution of papers over recent years as shown in Figure 1A. It is very clear

Semiconducting π-conjugated systems in field-effect transistors: a material odyssey of organic electronics.

The compelling demand for higher performance and lower power consumption in electronic systems is the main driving force of the electronics industry's quest for devices and/or architectures based on new materials. Here, we provide a review of electronic devices based on two-dimensional materials, outlining their potential as a technological option beyond scaled complementary metal-oxide-semiconductor switches. We focus on the performance limits and advantages of these materials and associated technologies, when exploited for both digital and analog applications, focusing on the main figures of merit needed to meet industry requirements. We also discuss the use of two-dimensional materials as an enabling factor for flexible electronics and provide our perspectives on future developments.

Electronics based on two-dimensional materials

This Review article summarizes the key advantages of using quantum dots (QDs) as luminophores in light-emitting devices (LEDs) and outlines the operating mechanisms of four types of QD-LED. The key scientific and technological challenges facing QD-LED commercialization are identified, together with on-going strategies to overcome these challenges.

Emergence of colloidal quantum-dot light-emitting technologies

The optoelectronic properties of polymeric semiconductor materials can be utilized for the fabrication of organic electronic and photonic devices. When key structural requirements are met, these materials exhibit unique properties such as solution processability, large charge transporting capabilities, and/or broad optical absorption. In this review recent developments in the area of π-conjugated polymeric semiconductors for organic thin-film (or field-effect) transistors (OTFTs or OFETs) and bulk-heterojunction photovoltaic (or solar) cell (BHJ-OPV or OSC) applications are summarized and analyzed.

π-Conjugated Polymers for Organic Electronics and Photovoltaic Cell Applications†

In this Progress Report we provide an update on recent developments in inkjet printing technology and its applications, which include organic thin-film transistors, light-emitting diodes, solar cells, conductive structures, memory devices, sensors, and biological/pharmaceutical tasks. Various classes of materials and device types are in turn examined and an opinion is offered about the nature of the progress that has been achieved.

Inkjet Printing—Process and Its Applications

We demonstrate the fabrication of diodes having inkjet printed light emitting quantum dots layer Close packing of printed layer is shown to be influenced by surface morphology of the underlying polymer layer and size variance of quantum dots used We extend our approach to printing quantum dots onto a quarter video graphics array substrate (76 800 monochrome pixels) The purity of emitted electroluminescent spectra of resulting devices is related to coverage integrity of printed layer, which in turn is shown to be affected by the number of printed drops per pixel

Inkjet printing of light emitting quantum dots

We report DC driven full color inkjet printed quantum-dots light-emitting devices. The inkjet was used to print monochromatic red, green, and blue, as well as integrate red-green-blue light-emitting quantum dots unto a substrate having QVGA display. The performance of the inkjet printed monochrome devices was on the same order as that of spin coated ones. For the full color RGB devices, a video brightness of 100 cd/m2 is achieved at 9.3 V.

Inkjet Printed RGB Quantum Dot-Hybrid LED

Organic solar cells based on planar metallophthalocyanines (MPc, M = Cu, Zn, Pd, Pc)/3,4,9,10-perylene tetracarboxylic bisbenzimidazole (PTCBI) were investigated. PdPc/PTCBI solar cells have a peak external quantum efficiency of 30.9%, which is almost twice as those of conventional solar cells based on CuPc and ZnPc/PTCBI. Optical modeling was carried out using a transfer matrix algorithm in order to determine the exciton diffusion lengths for four MPcs. External quantum efficiency measurement and optical modeling indicate that PdPc has the longest exciton diffusion length among four different MPcs, leading to a power conversion efficiency of 1.3% and a short circuit current density of 4.0 mA/cm2 under the illumination of AM 1.5 G 100 mW/cm2. When fullerene (C60) was used as an acceptor, solar cells based on PdPc exhibit a short circuit current density of 6.8 mA/cm2, resulting in a power conversion efficiency of 2.2%, while solar cells based on CuPc show 1.6%.

Efficient Organic Solar Cells Based on Planar Metallophthalocyanines

— A low-temperature amorphous-silicon (a-Si:H) thin-film-transistor (TFT) backplane technology for high-information-content flexible displays has been developed. Backplanes were integrated with frontplane technologies to produce high-performance active-matrix reflective electrophoretic ink, reflective cholesteric liquid crystal and emissive OLED flexible-display technology demonstrators (TDs). Backplanes up to 4 in. on the diagonal have been fabricated on a 6-in. wafer-scale pilot line. The critical steps in the evolution of backplane technology, from qualification of baseline low-temperature (180°C) a-Si:H process on the 6-in. line with rigid substrates, to transferring the process to flexible plastic and flexible stainless-steel substrates, to form factor scale-up of the TFT arrays, and finally manufacturing scale-up to a Gen 2 (370 × 470 mm) display-scale pilot line, will be reviewed.

Hanna M. Haverinen

Papers

Inkjet Printing—Process and Its Applications

Inkjet printing of light emitting quantum dots

Inkjet Printed RGB Quantum Dot-Hybrid LED

Efficient Organic Solar Cells Based on Planar Metallophthalocyanines

Low‐temperature amorphous‐silicon backplane technology development for flexible displays in a manufacturing pilot‐line environment