scispace - formally typeset
Search or ask a question
Author

Hannes Hartenstein

Bio: Hannes Hartenstein is an academic researcher from Karlsruhe Institute of Technology. The author has contributed to research in topics: Vehicular ad hoc network & Wireless ad hoc network. The author has an hindex of 55, co-authored 234 publications receiving 14515 citations. Previous affiliations of Hannes Hartenstein include University of Mannheim & University of Freiburg.


Papers
More filters
Journal ArticleDOI
TL;DR: An overview of ad hoc routing protocols that make forwarding decisions based on the geographical position of a packet's destination and previously proposed location services are discussed in addition to position-based packet forwarding strategies.
Abstract: We present an overview of ad hoc routing protocols that make forwarding decisions based on the geographical position of a packet's destination. Other than the destination's position, each node need know only its own position and the position of its one-hop neighbors in order to forward packets. Since it is not necessary to maintain explicit routes, position-based routing does scale well even if the network is highly dynamic. This is a major advantage in a mobile ad hoc network where the topology may change frequently. The main prerequisite for position-based routing is that a sender can obtain the current position of the destination. Therefore, previously proposed location services are discussed in addition to position-based packet forwarding strategies. We provide a qualitative comparison of the approaches in both areas and investigate opportunities for future research.

1,722 citations

Journal ArticleDOI
TL;DR: An overview of the field of vehicular ad hoc networks is given, providing motivations, challenges, and a snapshot of proposed solutions.
Abstract: There has been significant interest and progress in the field of vehicular ad hoc networks over the last several years. VANETs comprise vehicle-to-vehicle and vehicle-to-infrastructure communications based on wireless local area network technologies. The distinctive set of candidate applications (e.g., collision warning and local traffic information for drivers), resources (licensed spectrum, rechargeable power source), and the environment (e.g., vehicular traffic flow patterns, privacy concerns) make the VANET a unique area of wireless communication. This article gives an overview of the field, providing motivations, challenges, and a snapshot of proposed solutions.

1,545 citations

Proceedings ArticleDOI
09 Jun 2003
TL;DR: This paper analyzes a position-based routing approach that makes use of the navigational systems of vehicles and compares this approach with non-position-based ad hoc routing strategies (dynamic source routing and ad-hoc on-demand distance vector routing).
Abstract: Routing of data in a vehicular ad hoc network is a challenging task due to the high dynamics of such a network. Recently, it was shown for the case of highway traffic that position-based routing approaches can very well deal with the high mobility of network nodes. However, baseline position-based routing has difficulties to handle two-dimensional scenarios with obstacles (buildings) and voids as it is the case for city scenarios. In this paper we analyze a position-based routing approach that makes use of the navigational systems of vehicles. By means of simulation we compare this approach with non-position-based ad hoc routing strategies (dynamic source routing and ad-hoc on-demand distance vector routing). The simulation makes use of highly realistic vehicle movement patterns derived from Daimler-Chrysler's Videlio traffic simulator. While DSR's performance is limited due to problems with scalability and handling mobility, both AODV and the position-based approach show good performances with the position-based approach outperforming AODV.

912 citations

Journal ArticleDOI
TL;DR: The random waypoint model is a commonly used mobility model for simulations of wireless communication networks and some of its fundamental stochastic properties are investigated, including the transition length and time of a mobile node between two waypoints, the spatial distribution of nodes, and the direction angle at the beginning of a movement transition.
Abstract: The random waypoint model is a commonly used mobility model for simulations of wireless communication networks. By giving a formal description of this model in terms of a discrete-time stochastic process, we investigate some of its fundamental stochastic properties with respect to: (a) the transition length and time of a mobile node between two waypoints, (b) the spatial distribution of nodes, (c) the direction angle at the beginning of a movement transition, and (d) the cell change rate if the model is used in a cellular-structured system area. The results of this paper are of practical value for performance analysis of mobile networks and give a deeper understanding of the behavior of this mobility model. Such understanding is necessary to avoid misinterpretation of simulation results. The movement duration and the cell change rate enable us to make a statement about the "degree of mobility" of a certain simulation scenario. Knowledge of the spatial node distribution is essential for all investigations in which the relative location of the mobile nodes is important. Finally, the direction distribution explains in an analytical manner the effect that nodes tend to move back to the middle of the system area.

888 citations

Journal ArticleDOI
TL;DR: This short paper shows how position-based routing can be aplied to a city scenario without assuming that nodes have access to a static street map and without using source routing.
Abstract: Position-based routing, as it is used by protocols like Greedy Perimeter Stateless Routing (GPSR) [5], is very well suited for highly dynamic environments such as inter-vehicle communication on highways. However, it has been discussed that radio obstacles [4], as they are found in urban areas, have a significant negative impact on the performance of position-based routing. In prior work [6] we presented a position-based approach which alleviates this problem and is able to find robust routes within city environments. It is related to the idea of position-based source routing as proposed in [1] for terminode routing. The algorithm needs global knowledge of the city topology as it is provided by a static street map. Given this information the sender determines the junctions that have to be traversed by the packet using the Dijkstra shortest path algorithm. Forwarding between junctions is then done in a position-based fashion. In this short paper we show how position-based routing can be aplied to a city scenario without assuming that nodes have access to a static street map and without using source routing.

767 citations


Cited by
More filters
Proceedings ArticleDOI
22 Jan 2006
TL;DR: Some of the major results in random graphs and some of the more challenging open problems are reviewed, including those related to the WWW.
Abstract: We will review some of the major results in random graphs and some of the more challenging open problems. We will cover algorithmic and structural questions. We will touch on newer models, including those related to the WWW.

7,116 citations

Proceedings ArticleDOI
22 Aug 2005
TL;DR: A new routing scheme, called Spray and Wait, that "sprays" a number of copies into the network, and then "waits" till one of these nodes meets the destination, which outperforms all existing schemes with respect to both average message delivery delay and number of transmissions per message delivered.
Abstract: Intermittently connected mobile networks are sparse wireless networks where most of the time there does not exist a complete path from the source to the destination. These networks fall into the general category of Delay Tolerant Networks. There are many real networks that follow this paradigm, for example, wildlife tracking sensor networks, military networks, inter-planetary networks, etc. In this context, conventional routing schemes would fail.To deal with such networks researchers have suggested to use flooding-based routing schemes. While flooding-based schemes have a high probability of delivery, they waste a lot of energy and suffer from severe contention, which can significantly degrade their performance. Furthermore, proposed efforts to significantly reduce the overhead of flooding-based schemes have often be plagued by large delays. With this in mind, we introduce a new routing scheme, called Spray and Wait, that "sprays" a number of copies into the network, and then "waits" till one of these nodes meets the destination.Using theory and simulations we show that Spray and Wait outperforms all existing schemes with respect to both average message delivery delay and number of transmissions per message delivered; its overall performance is close to the optimal scheme. Furthermore, it is highly scalable retaining good performance under a large range of scenarios, unlike other schemes. Finally, it is simple to implement and to optimize in order to achieve given performance goals in practice.

2,712 citations

Journal ArticleDOI
John Kenney1
16 Jun 2011
TL;DR: The content and status of the DSRC standards being developed for deployment in the United States are explained, including insights into why specific technical solutions are being adopted, and key challenges remaining for successful DSRC deployment.
Abstract: Wireless vehicular communication has the potential to enable a host of new applications, the most important of which are a class of safety applications that can prevent collisions and save thousands of lives. The automotive industry is working to develop the dedicated short-range communication (DSRC) technology, for use in vehicle-to-vehicle and vehicle-to-roadside communication. The effectiveness of this technology is highly dependent on cooperative standards for interoperability. This paper explains the content and status of the DSRC standards being developed for deployment in the United States. Included in the discussion are the IEEE 802.11p amendment for wireless access in vehicular environments (WAVE), the IEEE 1609.2, 1609.3, and 1609.4 standards for Security, Network Services and Multi-Channel Operation, the SAE J2735 Message Set Dictionary, and the emerging SAE J2945.1 Communication Minimum Performance Requirements standard. The paper shows how these standards fit together to provide a comprehensive solution for DSRC. Most of the key standards are either recently published or expected to be completed in the coming year. A reader will gain a thorough understanding of DSRC technology for vehicular communication, including insights into why specific technical solutions are being adopted, and key challenges remaining for successful DSRC deployment. The U.S. Department of Transportation is planning to decide in 2013 whether to require DSRC equipment in new vehicles.

1,866 citations

Posted Content
TL;DR: This paper defines and explores proofs of retrievability (PORs), a POR scheme that enables an archive or back-up service to produce a concise proof that a user can retrieve a target file F, that is, that the archive retains and reliably transmits file data sufficient for the user to recover F in its entirety.
Abstract: In this paper, we define and explore proofs of retrievability (PORs). A POR scheme enables an archive or back-up service (prover) to produce a concise proof that a user (verifier) can retrieve a target file F, that is, that the archive retains and reliably transmits file data sufficient for the user to recover F in its entirety.A POR may be viewed as a kind of cryptographic proof of knowledge (POK), but one specially designed to handle a large file (or bitstring) F. We explore POR protocols here in which the communication costs, number of memory accesses for the prover, and storage requirements of the user (verifier) are small parameters essentially independent of the length of F. In addition to proposing new, practical POR constructions, we explore implementation considerations and optimizations that bear on previously explored, related schemes.In a POR, unlike a POK, neither the prover nor the verifier need actually have knowledge of F. PORs give rise to a new and unusual security definition whose formulation is another contribution of our work.We view PORs as an important tool for semi-trusted online archives. Existing cryptographic techniques help users ensure the privacy and integrity of files they retrieve. It is also natural, however, for users to want to verify that archives do not delete or modify files prior to retrieval. The goal of a POR is to accomplish these checks without users having to download the files themselves. A POR can also provide quality-of-service guarantees, i.e., show that a file is retrievable within a certain time bound.

1,783 citations

Journal ArticleDOI
01 Jan 2007
TL;DR: This paper provides a set of security protocols, it is shown that they protect privacy and it is analyzed their robustness and efficiency, and describes some major design decisions still to be made.
Abstract: Vehicular networks are very likely to be deployed in the coming years and thus become the most relevant form of mobile ad hoc networks. In this paper, we address the security of these networks. We provide a detailed threat analysis and devise an appropriate security architecture. We also describe some major design decisions still to be made, which in some cases have more than mere technical implications. We provide a set of security protocols, we show that they protect privacy and we analyze their robustness and efficiency.

1,550 citations