Hans G. Limberger

Bio: Hans G. Limberger is an academic researcher from École Polytechnique Fédérale de Lausanne. The author has contributed to research in topics: Fiber Bragg grating & Optical fiber. The author has an hindex of 27, co-authored 153 publications receiving 2858 citations. Previous affiliations of Hans G. Limberger include École Polytechnique & École Normale Supérieure.

Relative humidity sensor with optical fiber Bragg gratings

Abstract: A novel concept for an intrinsic relative humidity (RH) sensor that uses polyimide-recoated fiber Bragg gratings is presented. Tests in a controlled environment indicate that the sensor has a linear, reversible, and accurate response behavior at 10-90% RH and at 13-60 degrees C. The RH and temperature sensitivities were measured as a function of coating thickness, and the thermal and hygroscopic expansion coefficients of the polyimide coating were determined.

Bragg grating fast tunable filter for wavelength division multiplexing

Abstract: A Bragg grating fast tunable filter prototype working over a linear tuning range of 45 nm with a maximum tuning speed of 21 nm/ms has been realized. The tunable filter system is based on two piezoelectric stack actuators moving a mechanical device thus compressing an apodized fiber Bragg grating. The filter allows both traction and compression and can work in transmission and in reflection. It is designed to work with a channel spacing of 100 GHz according to the ITU specifications for wavelength division multiplexing systems.

Polarization microscopy by use of digital holography: application to optical- fiber birefringence measurements

Abstract: We present a digital holographic microscope that permits one to image polarization state. This technique results from the coupling of digital holographic microscopy and polarization digital holography. The interference between two orthogonally polarized reference waves and the wave transmitted by a microscopic sample, magnified by a microscope objective, is recorded on a CCD camera. The off-axis geometry permits one to reconstruct separately from this single hologram two wavefronts that are used to image the object-wave Jones vector. We applied this technique to image the birefringence of a bent fiber. To evaluate the precision of the phase-difference measurement, the birefringence induced by internal stress in an optical fiber is measured and compared to the birefringence profile captured by a standard method, which had been developed to obtain high-resolution birefringence profiles of optical fibers.

Embedded optical fiber Bragg grating sensor in a nonuniform strain field: Measurements and simulations

Abstract: This paper investigates the use of embedded optical fiber Bragg gratings to measure strain near a stress concentration within a solid structure. Due to the nature of a stress concentration (i.e., the strong nonuniformity of the strain field), the assumption that the grating spectrum in reflection remains a single peak with a constant bandwidth is not valid. Compact tension specimens including a controlled notch shape are fabricated, and optical fiber Bragg gratings with different gage lengths are embedded near the notch tip. The form of the spectra in transmission varies between gages that are at different distances from the notch tip under given loading conditions. This variation is shown to be due to the difference in the distribution of strain along the gage length. By using the strain field measured using electronic speckle pattern interferometry on the specimen surface and a discretized model of the grating, the spectra in transmission are then calculated analytically. For a known strain distribution, it is then shown that one can determine the magnitude of the applied force on the specimen. Thus, by considering the nonuniformity of the strain field, the optical fiber Bragg gage functions well as an embedded strain gage near the stress concentration.

Compaction- and photoelastic-induced index changes in fiber Bragg gratings

Abstract: The tension on the core of single‐mode fibers is strongly increased by the formation of a Bragg grating. This tension increase lowers the refractive index because of the photoelastic effect. On the other hand, the compaction of the core network results in an increased refractive index. The two contributions are evaluated from axial stress measurements, from the determined index modulation amplitude, and from the mean index change of the Bragg gratings. The total Bragg grating index modulation is smaller than the compaction‐induced index modulation by 30%–35% because of the photoelastic effect.

Fiber grating sensors

Abstract: We review the recent developments in the area of optical fiber grating sensors, including quasi-distributed strain sensing using Bragg gratings, systems based on chirped gratings, intragrating sensing concepts, long period-based grating sensors, fiber grating laser-based systems, and interferometric sensor systems based on grating reflectors.

Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics

Abstract: Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics are reviewed with the aim of providing an insight into different processes which may affect the behaviour of ferroelectric devices, such as ferroelectric memories and micro-electro-mechanical systems. Taking into consideration recent advances in this field, topics such as polarization switching, polarization fatigue, effects of defects, depletion layers, and depolarization fields on hysteresis loop behaviour, and contributions of domain-wall displacement to dielectric and piezoelectric properties are discussed. An introduction into dielectric, pyroelectric, piezoelectric and elastic properties of ferroelectric materials, symmetry considerations, coupling of electro-mechanical and thermal properties, and definitions of relevant ferroelectric phenomena are provided.

Optical fibre long-period grating sensors: characteristics and application

Abstract: Recent research on fibre optic long-period gratings (LPGs) is reviewed with emphasis placed upon the characteristics of LPGs that make them attractive for applications in sensing strain, temperature, bend radius and external index of refraction. The prospect of the development of multi-parameter sensors, capable of simultaneously monitoring a number of these measurands will be discussed.

Fiber Bragg gratings

Abstract: Since the discovery of photosensitivity in optical fibers there has been great interest in the fabrication of Bragg gratings within the core of a fiber. The ability to inscribe intracore Bragg gratings in these photosensitive fibers has revolutionized the field of telecommunications and optical fiber based sensor technology. Over the last few years, the number of researchers investigating fundamental, as well as application aspects of these gratings has increased dramatically. This article reviews the technology of Bragg gratings in optical fibers. It introduces the phenomenon of photosensitivity in optical fibers, examines the properties of Bragg gratings, and presents some of the important developments in devices and applications. The most common fabrication techniques (interferometric, phase mask, and point by point) are examined in detail with reference to the advantages and the disadvantages in utilizing them for inscribing Bragg gratings. Reflectivity, bandwidth, temperature, and strain sensitivity of the Bragg reflectors are examined and novel and special Bragg grating structures such as chirped gratings, blazed gratings, phase-shifted gratings, and superimposed multiple gratings are discussed. A formalism for calculating the spectral response of Bragg grating structures is described. Finally, devices and applications for telecommunication and fiber-optic sensors are described, and the impact of this technology on the future of the above areas is discussed.

Fibre Bragg gratings in structural health monitoring—Present status and applications

Abstract: In-service structural health monitoring (SHM) of engineering structures has assumed a significant role in assessing their safety and integrity. Fibre Bragg grating (FBG) sensors have emerged as a reliable, in situ, non-destructive tool for monitoring, diagnostics and control in civil structures. The versatility of FBG sensors represents a key advantage over other technologies in the structural sensing field. In this article, the recent research and development activities in structural health monitoring using FBG sensors have been critically reviewed, highlighting the areas where further work is needed. A few packaging schemes for FBG strain sensors are also discussed. Finally a few limitations and market barriers associated with the use of these sensors have been addressed.