Haresh Kamath

Bio: Haresh Kamath is an academic researcher from Electric Power Research Institute. The author has contributed to research in topics: Photovoltaic system & Grid-connected photovoltaic power system. The author has an hindex of 8, co-authored 10 publications receiving 9284 citations.

Electrical Energy Storage for the Grid: A Battery of Choices

Abstract: The increasing interest in energy storage for the grid can be attributed to multiple factors, including the capital costs of managing peak demands, the investments needed for grid reliability, and the integration of renewable energy sources. Although existing energy storage is dominated by pumped hydroelectric, there is the recognition that battery systems can offer a number of high-value opportunities, provided that lower costs can be obtained. The battery systems reviewed here include sodium-sulfur batteries that are commercially available for grid applications, redox-flow batteries that offer low cost, and lithium-ion batteries whose development for commercial electronics and electric vehicles is being applied to grid storage.

Dynamic Control and Optimization of Distributed Energy Resources in a Microgrid

Abstract: As we transition toward a power grid that is increasingly based on renewable resources like solar and wind, the intelligent control of distributed energy resources (DERs) including photovoltaic (PV) arrays, controllable loads, energy storage, and plug-in electric vehicles (EVs) will be critical to realizing a power grid that can handle both the variability and unpredictability of renewable energy sources as well as increasing system complexity. Realizing such a decentralized and dynamic infrastructure will require the ability to solve large scale problems in real-time with hundreds of thousands of DERs simultaneously online. Because of the scale of the optimization problem, we use an iterative distributed algorithm previously developed in our group to operate each DER independently and autonomously within this environment. The algorithm is deployed within a framework that allows the microgrid to dynamically adapt to changes in the operating environment. Specifically, we consider a commercial site equipped with on-site PV generation, partially curtailable load, EV charge stations and a battery electric storage unit. The site operates as a small microgrid that can participate in the wholesale market on the power grid. We report results for simulations using real-data that demonstrate the ability of the optimization framework to respond dynamically in real-time to external conditions while maintaining the functional requirements of all DERs.

Dynamic Control and Optimization of Distributed Energy Resources in a Microgrid

Abstract: As we transition towards a power grid that is increasingly based on renewable resources like solar and wind, the intelligent control of distributed energy resources (DER) including photovoltaic (PV) arrays, controllable loads, energy storage and plug-in electric vehicles (EVs) will be critical to realizing a power grid that can handle both the variability and unpredictability of renewable energy sources as well as increasing system complexity. Realizing such a decentralized and dynamic infrastructure will require the ability to solve large scale problems in real-time with hundreds of thousands of DERs simultaneously online. Because of the scale of the optimization problem, we use an iterative distributed algorithm previously developed in our group to operate each DER independently and autonomously within this environment. The algorithm is deployed within a framework that allows the microgrid to dynamically adapt to changes in the operating environment. Specifically, we consider a commercial site equipped with on-site PV generation, partially curtailable load, EV charge stations and a battery electric storage (BES) unit. The site operates as a small microgrid that can participate in the wholesale market on the power grid. We report results for simulations using real data that demonstrate the ability of the optimization framework to respond dynamically in real-time to external conditions while maintaining the functional requirements of all DERs.

Control and Optimization of Grid-Tied Photovoltaic Storage Systems Using Model Predictive Control

Abstract: In this paper, we develop optimization and control methods for a grid-tied photovoltaic (PV) storage system. The storage component consists of two separate units, a large slower moving unit for energy shifting and arbitrage and a small rapid charging unit for smoothing. We use a Model Predictive Control (MPC) framework to allow the units to automatically and dynamically adapt to changes in PV output while responding to external system operator requests or price signals. At each time step, the system is modeled using convex objectives and constraints and solved to obtain a control schedule for the storage units across the MPC horizon. For each subsequent time step, the first step of the schedule is executed before repeating the optimization process to account for changes in the operating environment and predictions due to availability of additional information. We present simulation results that demonstrate the ability of this optimization framework to respond dynamically in real time to external price signals and provide increased system benefits including smoother power output while respecting and maintaining the functional requirements of the storage units and power converters.

A low-cost time shared cell balancing technique for future lithium-ion battery storage system featuring regenerative energy distribution

Abstract: A new cell voltage equalizer topology for future plug-in hybrid electric vehicles (PHEV) or renewable energy storage has been proposed in this paper. This topology has fewer components compared to the conventional topologies found in the literatures, and therefore, it could reduce cost and fabrication complexity. This new circuit is based on a time shared fly-back converter, and any number of series connected cells could be used in a string without any apparent issues. Each cell in a string shares this converter during its allocated time slot provided by the microcontroller. In addition, dynamic allocations of the time slots are possible to achieve faster cell balancing, and the circuit dynamically distributes depleted charge among cells in a regenerative fashion — ensuring a very high efficiency. The prototype of a four-cell lithium-ion battery balancer circuit was designed and implemented. Simulation and experimental results are presented to verify the operation of the new topology.

Towards greener and more sustainable batteries for electrical energy storage

Abstract: Energy storage using batteries offers a solution to the intermittent nature of energy production from renewable sources; however, such technology must be sustainable. This Review discusses battery development from a sustainability perspective, considering the energy and environmental costs of state-of-the-art Li-ion batteries and the design of new systems beyond Li-ion. Images: batteries, car, globe: © iStock/Thinkstock.

Reviving the lithium metal anode for high-energy batteries

Abstract: Lithium-ion batteries have had a profound impact on our daily life, but inherent limitations make it difficult for Li-ion chemistries to meet the growing demands for portable electronics, electric vehicles and grid-scale energy storage. Therefore, chemistries beyond Li-ion are currently being investigated and need to be made viable for commercial applications. The use of metallic Li is one of the most favoured choices for next-generation Li batteries, especially Li-S and Li-air systems. After falling into oblivion for several decades because of safety concerns, metallic Li is now ready for a revival, thanks to the development of investigative tools and nanotechnology-based solutions. In this Review, we first summarize the current understanding on Li anodes, then highlight the recent key progress in materials design and advanced characterization techniques, and finally discuss the opportunities and possible directions for future development of Li anodes in applications.

Pseudocapacitive oxide materials for high-rate electrochemical energy storage

Abstract: Electrochemical energy storage technology is based on devices capable of exhibiting high energy density (batteries) or high power density (electrochemical capacitors). There is a growing need, for current and near-future applications, where both high energy and high power densities are required in the same material. Pseudocapacitance, a faradaic process involving surface or near surface redox reactions, offers a means of achieving high energy density at high charge–discharge rates. Here, we focus on the pseudocapacitive properties of transition metal oxides. First, we introduce pseudocapacitance and describe its electrochemical features. Then, we review the most relevant pseudocapacitive materials in aqueous and non-aqueous electrolytes. The major challenges for pseudocapacitive materials along with a future outlook are detailed at the end.

Toward Safe Lithium Metal Anode in Rechargeable Batteries: A Review.

Abstract: The lithium metal battery is strongly considered to be one of the most promising candidates for high-energy-density energy storage devices in our modern and technology-based society. However, uncontrollable lithium dendrite growth induces poor cycling efficiency and severe safety concerns, dragging lithium metal batteries out of practical applications. This review presents a comprehensive overview of the lithium metal anode and its dendritic lithium growth. First, the working principles and technical challenges of a lithium metal anode are underscored. Specific attention is paid to the mechanistic understandings and quantitative models for solid electrolyte interphase (SEI) formation, lithium dendrite nucleation, and growth. On the basis of previous theoretical understanding and analysis, recently proposed strategies to suppress dendrite growth of lithium metal anode and some other metal anodes are reviewed. A section dedicated to the potential of full-cell lithium metal batteries for practical applicatio...