Herman Bosman

Bio: Herman Bosman is an academic researcher. The author has contributed to research in topics: Thin film & Microwave. The author has an hindex of 1, co-authored 1 publications receiving 96 citations.

Microwave absorption on a thin film

Abstract: With the use of a simple model, it is shown that a thin film of contaminant on a microwave window may absorb up to 50% of the incident power, even if the film thickness is only a small fraction of its resistive skin depth. This unexpectedly large amount of absorption is conjectured to have played a significant role in window failure. The temperature rise in a thin film is estimated.

Ultra-thin perfect absorber employing a tunable phase change material

Abstract: We show that perfect absorption can be achieved in a system comprising a single lossy dielectric layer of thickness much smaller than the incident wavelength on an opaque substrate by utilizing the nontrivial phase shifts at interfaces between lossy media. This design is implemented with an ultra-thin (∼λ/65) vanadium dioxide (VO2) layer on sapphire, temperature tuned in the vicinity of the VO2 insulator-to-metal phase transition, leading to 99.75% absorption at λ = 11.6 μm. The structural simplicity and large tuning range (from ∼80% to 0.25% in reflectivity) are promising for thermal emitters, modulators, and bolometers.

Graphene-enabled electrically switchable radar-absorbing surfaces

Abstract: Radar-absorbing materials are used in stealth technologies for concealment of an object from radar detection. Resistive and/or magnetic composite materials are used to reduce the backscattered microwave signals. Inability to control electrical properties of these materials, however, hinders the realization of active camouflage systems. Here, using large-area graphene electrodes, we demonstrate active surfaces that enable electrical control of reflection, transmission and absorption of microwaves. Instead of tuning bulk material property, our strategy relies on electrostatic tuning of the charge density on an atomically thin electrode, which operates as a tunable metal in microwave frequencies. Notably, we report large-area adaptive radar-absorbing surfaces with tunable reflection suppression ratio up to 50 dB with operation voltages <5 V. Using the developed surfaces, we demonstrate various device architectures including pixelated and curved surfaces. Our results provide a significant step in realization of active camouflage systems in microwave frequencies.

Graphene-enabled electrically switchable radar absorbing surfaces

Abstract: Radar-absorbing materials are used in stealth technologies for concealment of an object from radar detection. Resistive and/or magnetic composite materials are used to reduce the backscattered microwave signals. Inability to control electrical properties of these materials, however, hinders the realization of active camouflage systems. Here, using large-area graphene electrodes, we demonstrate active surfaces that enable electrical control of reflection, transmission and absorption of microwaves. Instead of tuning bulk material property, our strategy relies on electrostatic tuning of the charge density on an atomically thin electrode, which operates as a tunable metal in microwave frequencies. Notably, we report large-area adaptive radar-absorbing surfaces with tunable reflection suppression ratio up to 50 dB with operation voltages <5 V. Using the developed surfaces, we demonstrate various device architectures including pixelated and curved surfaces. Our results provide a significant step in realization of active camouflage systems in microwave frequencies.

Microwave absorption properties of the ZnO nanowire-polyester composites

Abstract: We report on the microwave response properties of the ZnO nanowire-polyester composites fabricated into a planar plate with the area of 180×180 mm2 and the thickness of about 1 mm. Strong microwave absorption has been observed in X band and the maximum absorption is enhanced as the concentration of the nanowires increases in the composites. Both the low complex permittivity and the low dissipation of the pure nanowires demonstrate the pure nanowires are low-loss materials for microwave absorption in X band. The strong absorption is related to interfacial multipoles at the interface between the polyester and the ZnO nanowires, a high surface-to-volume ratio and a similar shape of the nanowires to antenna.

Optical absorbers based on strong interference in ultra-thin films

Abstract: Optical absorbers find uses in a wide array of applications across the electromagnetic spectrum, including photovoltaic and photochemical cells, photodetectors, optical filters, stealth technology, and thermal light sources. Recent efforts have sought to reduce the footprint of optical absorbers, conventionally based on graded structures or Fabry-Perot-type cavities, by using emerging concepts in plasmonics, metamaterials, and metasurfaces. Unfortunately, these new absorber designs require patterning on subwavelength length scales, and are therefore impractical for many large-scale optical and optoelectronic devices. In this article, we summarize recent progress in the development of optical absorbers based on lossy films with thicknesses significantly smaller than the incident optical wavelength. These structures have a small footprint and require no nanoscale patterning. We outline the theoretical foundation of these absorbers based on “ultra-thin-film interference”, including the concepts of loss-induced phase shifts and critical coupling, and then review several applications, including ultra-thin color coatings, decorative photovoltaics, high-efficiency photochemical cells, and infrared scene generators.