Hiesang Sohn

Bio: Hiesang Sohn is an academic researcher from Kwangwoon University. The author has contributed to research in topics: Layer (electronics) & Graphene. The author has an hindex of 10, co-authored 39 publications receiving 296 citations. Previous affiliations of Hiesang Sohn include Samsung.

Novel Flexible Transparent Conductive Films with Enhanced Chemical and Electromechanical Sustainability: TiO2 Nanosheet-Ag Nanowire Hybrid.

Abstract: Flexible transparent conductive films (TCFs) of TiO2 nanosheet (TiO2 NS) and silver nanowire (Ag NW) network hybrid were prepared through a simple and scalable solution-based process. The as-formed TiO2 NS–Ag NW hybrid TCF shows a high optical transmittance (TT: 97% (90.2% including plastic substrate)) and low sheet resistance (Rs: 40 Ω/sq). In addition, the TiO2 NS–Ag NW hybrid TCF exhibits a long-time chemical/aging and electromechanical stability. As for the chemical/aging stability, the hybrid TCF of Ag NW and TiO2 NS reveals a retained initial conductivity (ΔRs/Rs 4000%) or RuO2 NS–Ag NW hybrid (ΔRs/Rs > 200%). As corroborated by the density functional theory simulation, the superb chemical stability of TiO2 NS–Ag NW hybrid is attributable to the unique role of TiO2 NS as a barrier, which prevents Ag NW’s chemical corrosion via the attenuated adsorption of sulfidation molecules (H2S) on TiO2 NS. With respect to the...

Minimized Volume Expansion in Hierarchical Porous Silicon upon Lithiation

Abstract: Silicon (Si) remains one of the most promising anode materials for next-generation lithium-ion batteries (LIBs). The key challenge for Si anodes is the huge volume change during lithiation-delithiation cycles that leads to electrode pulverization and rapid capacity fading. Here, we report a hierarchical porous Si (hp-Si) with a tailored porous structure [tunable primary pores (20-200 nm) and secondary nanopores (∼3-10 nm)] that can effectively minimize the volume expansion. An in situ transmission electron microscopy (TEM) study revealed that the hp-Si material with the same porosity but larger primary pores can more effectively accommodate lithiation-induced volume expansion, giving rise to a much reduced apparent volume expansion on both material and electrode levels. Chemomechanical modeling revealed that because of the different relative stiffnesses of the lithiated and unlithiated Si phases, the primary pore size plays a key role in accommodating the volume expansion of lithiated Si. The higher structural stability of the hp-Si materials with larger primary pores also maintains the fast diffusion channels of the connective pores, giving rise to better power capability and capacity retention upon electrochemical cycling. Our findings point toward an optimized hp-Si material with minimal volume change during electrochemical cycling for next-generation LIBs.

Silver Nanowire Networks: Mechano-Electric Properties and Applications.

Abstract: With increasing technological demand for portable electronic and photovoltaic devices, it has become critical to ensure the electrical and mechano-electric reliability of electrodes in such devices. However, the limited flexibility and high processing costs of traditional electrodes based on indium tin oxide undermine their application in flexible devices. Among various alternative materials for flexible electrodes, such as metallic/carbon nanowires or meshes, silver nanowire (Ag NW) networks are regarded as promising candidates owing to their excellent electrical, optical, and mechano-electric properties. In this context, there have been tremendous studies on the physico-chemical and mechano-electric properties of Ag NW networks. At the same time, it has been a crucial job to maximize the device performance (or their mechano-electric performance) by reconciliation of various properties. This review discusses the properties and device applications of Ag NW networks under dynamic motion by focusing on notable findings and cases in the recent literature. Initially, we introduce the fabrication (deposition process) of Ag NW network-based electrodes from solution-based coating processes (drop casting, spray coating, spin coating, etc.) to commercial processes (slot-die and roll-to-roll coating). We also discuss the electrical/optical properties of Ag NW networks, which are governed by percolation, and their electrical contacts. Second, the mechano-electric properties of Ag NW networks are reviewed by describing individual and combined properties of NW networks with dynamic motion under cyclic loading. The improved mechano-electric properties of Ag NW network-based flexible electrodes are also discussed by presenting various approaches, including post-treatment and hybridization. Third, various Ag NW-based flexible devices (electronic and optoelectronic devices) are introduced by discussing their operation principles, performance, and challenges. Finally, we offer remarks on the challenges facing the current studies and discuss the direction of research in this field, as well as forthcoming issues to be overcome to achieve integration into commercial devices.

Interpenetrated Gel Polymer Binder for High Performance Silicon Anodes in Lithium-Ion Batteries

Abstract: Silicon has attracted ever-increasing attention as a high-capacity anode material in Li-ion batteries owing to its extremely high theoretical capacity. However, practical application of silicon anodes is seriously hindered by its fast capacity fading as a result of huge volume changes during the charge/discharge process. Here, an interpenetrated gel polymer binder for high-performance silicon anodes is created through in-situ crosslinking of water-soluble poly(acrylic acid) (PAA) and polyvinyl alcohol (PVA) precursors. This gel polymer binder with deformable polymer network and strong adhesion on silicon particles can effectively accommodate the large volume change of silicon anodes upon lithiation/delithiation, leading to an excellent cycling stability and high Coulombic efficiency even at high current densities. Moreover, high areal capacity of ∼4.3 mAh/cm2 is achieved based on the silicon anode using the gel PAA–PVA polymer binder with a high mass loading. In view of simplicity in using the water soluble gel polymer binder, it is believed that this novel binder has a great potential to be used for high capacity silicon anodes in next generation Li-ion batteries, as well as for other electrode materials with large volume change during cycling.

A comprehensive review on plasmonic-based biosensors used in viral diagnostics.

Abstract: The proliferation and transmission of viruses has become a threat to worldwide biosecurity, as exemplified by the current COVID-19 pandemic. Early diagnosis of viral infection and disease control have always been critical. Virus detection can be achieved based on various plasmonic phenomena, including propagating surface plasmon resonance (SPR), localized SPR, surface-enhanced Raman scattering, surface-enhanced fluorescence and surface-enhanced infrared absorption spectroscopy. The present review covers all available information on plasmonic-based virus detection, and collected data on these sensors based on several parameters. These data will assist the audience in advancing research and development of a new generation of versatile virus biosensors.

Advances in nanomaterials for electrochromic devices

Abstract: Electrochromic devices (ECDs) have been regarded as promising candidates for energy-saving smart windows, next-generation displays and wearable electronics due to their significant benefits of simple and adjustable structures, low power consumption, flexible and stretchable features, and eye-friendly modes for displays. However, there are many existing issues waiting to be solved such as durability, reversibility and inadequate switching performances. These insurmountable technical bottlenecks significantly slow down the commercialization of next-generation ECDs. Nanomaterials with superior active reaction surface area have played indispensable roles in optimizing heterogeneous electron transfer and homogeneous ion transfer for ECDs and other optoelectronic devices. In recent years, with the joint efforts of various outstanding research teams, new kinds and methods for nanomaterials to fabricate ECDs with excellent performances have been rapidly developing. This review highlights the latest exciting results regarding the design and application of new and unique nanomaterials for each layer of ECDs. Meanwhile, the structures, mechanisms, features and preparation of the reported nanomaterials to improve the electrochromic properties have been discussed in detail. In addition, the remaining challenges and corresponding strategies of this field are also proposed. Hopefully, this review can inspire more and more researchers to enrich the nanomaterials for ECDs and other related fields to overcome faced technical barriers by innovative means and promote industrialization of ECDs and other optoelectronic technologies.