Hiroyuki Sasabe

Bio: Hiroyuki Sasabe is an academic researcher from Chitose Institute of Science and Technology. The author has contributed to research in topics: Carbazole & Monolayer. The author has an hindex of 50, co-authored 341 publications receiving 9796 citations. Previous affiliations of Hiroyuki Sasabe include University of Toyama & Rohm.

Organic Optical Limiter with a Strong Nonlinear Absorptive Response

Abstract: Molecules with weak ground-state absorption that form strongly absorbing excited states can be used in optical limiters, which can protect sensors or human eyes from optical damage. Phthalocyanine complexes bearing heavy atoms or paramagnetic groups or in solvents containing heavy atoms show optical limiting enhanced by excited triplet-state absorption. A nonhomogeneous distribution of indium tetra(tert-butyl)phthalocyanine chloride along the beam path substantially enhances the excited-state absorption, yielding an optical limiter with a linear transmittance of 0.70 that can attenuate 8-nanosecond, 532-nanometer laser pulses by factors of up to 540.

100% phosphorescence quantum efficiency of Ir(III) complexes in organic semiconductor films

Abstract: We demonstrate that three Ir(III) complexes used as principal dopants in organic electrophosphorescent diodes have very high photoluminescence quantum efficiency (ηPL) in a solid-state film. The green emitting complex, fac-tris(2-phenylpyridinato)iridium(III) [Ir(ppy)3], the red-emitting bis[2-(2′-benzothienyl)pyridinato-N,C3′] (acetylacetonato)iridium(III) [Btp2Ir(acac)], and the blue complex bis[(4,6-difluorophenyl)pyridinato-N,C2](picolinato)iridium(III) (FIrpic) were prepared as codeposited films of varying concentration with 4,4′-bis(N-carbazolyl)-2,2′-biphenyl, a commonly used host material. The maximum ηPL values for Ir(ppy)3, Btp2Ir(acac), and FIrpic were, respectively, 97%±2% (at 1.5mol%), 51%±1% (at 1.4mol%), and 78%±1% (at 15mol%). Furthermore, we also observed that the maximum ηPL of FIrpic reached 99%±1% when doped into the high triplet energy host, m-bis(N-carbazolyl)benzene, at an optimal concentration of 1.2mol%.

Intermolecular interaction and a concentration-quenching mechanism of phosphorescent Ir(III) complexes in a solid film.

Abstract: Solid-state self-quenching processes of highly efficient Ir(III) phosphorescent emitters are investigated by the measurement of thin film photoluminescence quantum efficiency and transient lifetime as a function of doping concentration in a host matrix. The radiative decay rate constant is found to be independent from the average distance between dopant molecules (R), and the concentration-quenching rate constant is shown to be dependent on R(-6). The quenching dependence on R strongly suggests that luminescent concentration quenching in a phosphorescent Ir(III) complex:host film is controlled by dipole-dipole deactivating interactions as described by the Forster energy transfer model.

Triplet exciton confinement and unconfinement by adjacent hole-transport layers

Abstract: To understand confinement of the triplet exciton of Ir(ppy)3 by hole-transport layers, we compared energy-dissipative processes of the triplet exciton of Ir(ppy)3 which is doped into 4,4′-bis[N-(1-naphthyl)-N-phenyl-amino]biphenyl (α-NPD), 4,4′-bis [N-(p-tolyl)-N- phenyl-amino]biphenyl (TPD), 1,1-bis[(di-4-tolylamino)phenyl]cyclohexane (TAPC), and 4,4′-N,N′-dicarbazole-biphenyl hosts. Significant energy transfer from Ir(ppy)3 into the triplet levels of α-NPD was observed. In the case of the TPD host, however, partial confinement of the Ir(ppy)3 triplet exciton was observed. This result suggests both forward and backward energy transfer from Ir(ppy)3 to the TPD triplet levels. Furthermore, employing TAPC as a hole-transport layer achieved strong confinement of the Ir(ppy)3 triplet exciton. One conclusion from these results is that electrophosphorescence efficiency is well correlated with the triplet energy level of the hole-transport layer host materials.

Surface Phase Behavior of n-Alkanethiol Self-Assembled Monolayers Adsorbed on Au(111): An Atomic Force Microscope Study

Abstract: n-Alkanethiol (CnH2n+1SH) self-assembled monolayers (SAMs) adsorbed on Au(111) were studied with an atomic force microscope (AFM) to confirm the influence of the lateral interaction between adsorbe...

White organic light-emitting diodes with fluorescent tube efficiency

Abstract: The development of white organic light-emitting diodes (OLEDs) holds great promise for the production of highly efficient large-area light sources. High internal quantum efficiencies for the conversion of electrical energy to light have been realized. Nevertheless, the overall device power efficiencies are still considerably below the 60-70 lumens per watt of fluorescent tubes, which is the current benchmark for novel light sources. Although some reports about highly power-efficient white OLEDs exist, details about structure and the measurement conditions of these structures have not been fully disclosed: the highest power efficiency reported in the scientific literature is 44 lm W(-1) (ref. 7). Here we report an improved OLED structure which reaches fluorescent tube efficiency. By combining a carefully chosen emitter layer with high-refractive-index substrates, and using a periodic outcoupling structure, we achieve a device power efficiency of 90 lm W(-1) at 1,000 candelas per square metre. This efficiency has the potential to be raised to 124 lm W(-1) if the light outcoupling can be further improved. Besides approaching internal quantum efficiency values of one, we have also focused on reducing energetic and ohmic losses that occur during electron-photon conversion. We anticipate that our results will be a starting point for further research, leading to white OLEDs having efficiencies beyond 100 lm W(-1). This could make white-light OLEDs, with their soft area light and high colour-rendering qualities, the light sources of choice for the future.

Surface-Enhanced Raman Spectroscopy

Abstract: The ability to control the size, shape, and material of a surface has reinvigorated the field of surface-enhanced Raman spectroscopy (SERS). Because excitation of the localized surface plasmon resonance of a nanostructured surface or nanoparticle lies at the heart of SERS, the ability to reliably control the surface characteristics has taken SERS from an interesting surface phenomenon to a rapidly developing analytical tool. This article first explains many fundamental features of SERS and then describes the use of nanosphere lithography for the fabrication of highly reproducible and robust SERS substrates. In particular, we review metal film over nanosphere surfaces as excellent candidates for several experiments that were once impossible with more primitive SERS substrates (e.g., metal island films). The article also describes progress in applying SERS to the detection of chemical warfare agents and several biological molecules.

Lanthanide luminescence for functional materials and bio-sciences

Abstract: Recent startling interest for lanthanide luminescence is stimulated by the continuously expanding need for luminescent materials meeting the stringent requirements of telecommunication, lighting, electroluminescent devices, (bio-)analytical sensors and bio-imaging set-ups. This critical review describes the latest developments in (i) the sensitization of near-infrared luminescence, (ii) “soft” luminescent materials (liquid crystals, ionic liquids, ionogels), (iii) electroluminescent materials for organic light emitting diodes, with emphasis on white light generation, and (iv) applications in luminescent bio-sensing and bio-imaging based on time-resolved detection and multiphoton excitation (500 references).

Surface-enhanced Raman spectroscopy.

Abstract: The ability to control the size, shape, and material of a surface has reinvigorated the field of surface-enhanced Raman spectroscopy (SERS). Because excitation of the localized surface plasmon resonance of a nanostructured surface or nanoparticle lies at the heart of SERS, the ability to reliably control the surface characteristics has taken SERS from an interesting surface phenomenon to a rapidly developing analytical tool. This article first explains many fundamental features of SERS and then describes the use of nanosphere lithography for the fabrication of highly reproducible and robust SERS substrates. In particular, we review metal film over nanosphere surfaces as excellent candidates for several experiments that were once impossible with more primitive SERS substrates (e.g., metal island films). The article also describes progress in applying SERS to the detection of chemical warfare agents and several biological molecules.