Hisayoshi Matsuo

Bio: Hisayoshi Matsuo is an academic researcher from Panasonic. The author has contributed to research in topics: Breakdown voltage & Transistor. The author has an hindex of 12, co-authored 14 publications receiving 1266 citations.

Gate Injection Transistor (GIT)—A Normally-Off AlGaN/GaN Power Transistor Using Conductivity Modulation

Abstract: We have developed a normally-off GaN-based transistor using conductivity modulation, which we call a gate injection transistor (GIT). This new device principle utilizes hole-injection from the p-AlGaN to the AlGaN/GaN heterojunction, which simultaneously increases the electron density in the channel, resulting in a dramatic increase of the drain current owing to the conductivity modulation. The fabricated GIT exhibits a threshold voltage of 1.0 V with a maximum drain current of 200 mA/mm, in which a forward gate voltage of up to 6 V can be applied. The obtained specific ON-state resistance (RON . A) and the OFF-state breakdown voltage (BV ds) are 2.6 mOmega . cm2 and 800 V, respectively. The developed GIT is advantageous for power switching applications.

8300V Blocking Voltage AlGaN/GaN Power HFET with Thick Poly-AlN Passivation

Abstract: We report ultra high voltage AlGaN/GaN heterojunction transistors (HFETs) on sapphire with thick poly-AlN passivation. Extremely high blocking voltage of 8300 V is achieved while maintaining relative low specific on-state resistance (Ron*A) of 186 mOmegaldrcm2. Via-holes through sapphire at the drain electrodes enable very efficient layout of the lateral HFET array as well as better heat dissipation.

650 V 3.1 mΩcm 2 GaN-based monolithic bidirectional switch using normally-off gate injection transistor

Abstract: We report a normally-off GaN-based monolithic bidirectional switch for the first time. The switch consists of a double-gate AlGaN/GaN gate injection transistor (GIT) which serves normally-off operation with high drain current utilizing the hole injection from the p-type gate. The fabricated bidirectional switch exhibits high breakdown voltage of 650 V for both polarities and low on-state resistance (Ron .A) of 3.1 mΩcm2 . The GaN-based bidirectional switch can be applied to AC-AC matrix converters with high efficiency.

A Normally-off AlGaN/GaN Transistor with R on A=2.6mΩcm 2 and BV ds =640V Using Conductivity Modulation

Abstract: We report a normally-off GaN-based transistor using conductivity modulation, which we call GIT (Gate Injection Transistor). This new device principle utilizes hole-injection from p-AlGaN to AlGaN/GaN heterojunction, which increases electron density in the depleted channel resulting in dramatic increase of the drain current owing to the conductivity modulation. The fabricated GIT exhibits the threshold voltage of 1.0V with high maximum drain current of 200mA/mm. The obtained on-state resistance (Ron·A) and off-state breakdown voltage (BVds) are 2.6mΩ·cm2 and 640V, respectively. These values are the best ones ever reported for GaN-based normally-off transistors.

GaN monolithic inverter IC using normally-off gate injection transistors with planar isolation on Si substrate

Abstract: We present a GaN monolithic inverter IC on Si substrate and successful motor-drive by it for the first time. Taking advantages of the bi-directional operation free from the forward voltage off-set [1], the inverter can be operated just by the integrated six GaN-based normally-off gate injection transistors (GITs) without any external fast recovery diodes (FRDs) to flow the fly-wheel current. The IC enables the efficiency as high as 93% at low power operation where so far that of conventional Si-based inverters has remained lower value owing to the forward voltage off-set. The key processing technology is the newly introduced planar isolation using Fe ion implantation which fully isolates the GaN-based lateral devices each other.

A Survey of Wide Bandgap Power Semiconductor Devices

Abstract: Wide bandgap semiconductors show superior material properties enabling potential power device operation at higher temperatures, voltages, and switching speeds than current Si technology. As a result, a new generation of power devices is being developed for power converter applications in which traditional Si power devices show limited operation. The use of these new power semiconductor devices will allow both an important improvement in the performance of existing power converters and the development of new power converters, accounting for an increase in the efficiency of the electric energy transformations and a more rational use of the electric energy. At present, SiC and GaN are the more promising semiconductor materials for these new power devices as a consequence of their outstanding properties, commercial availability of starting material, and maturity of their technological processes. This paper presents a review of recent progresses in the development of SiC- and GaN-based power semiconductor devices together with an overall view of the state of the art of this new device generation.

GaN-on-Si Power Technology: Devices and Applications

Abstract: In this paper, we present a comprehensive reviewand discussion of the state-of-the-art device technology and application development of GaN-on-Si power electronics. Several device technologies for realizing normally off operation that is highly desirable for power switching applications are presented. In addition, the examples of circuit applications that can greatly benefit from the superior performance of GaN power devices are demonstrated. Comparisonwith other competingpower device technology, such as Si superjunction-MOSFET and SiC MOSFET, is also presented and analyzed. Critical issues for commercialization of GaN-on-Si power devices are discussed with regard to cost, reliability, and ease of use.

The 2018 GaN power electronics roadmap

Abstract: Gallium nitride (GaN) is a compound semiconductor that has tremendous potential to facilitate economic growth in a semiconductor industry that is silicon-based and currently faced with diminishing returns of performance versus cost of investment. At a material level, its high electric field strength and electron mobility have already shown tremendous potential for high frequency communications and photonic applications. Advances in growth on commercially viable large area substrates are now at the point where power conversion applications of GaN are at the cusp of commercialisation. The future for building on the work described here in ways driven by specific challenges emerging from entirely new markets and applications is very exciting. This collection of GaN technology developments is therefore not itself a road map but a valuable collection of global state-of-the-art GaN research that will inform the next phase of the technology as market driven requirements evolve. First generation production devices are igniting large new markets and applications that can only be achieved using the advantages of higher speed, low specific resistivity and low saturation switching transistors. Major investments are being made by industrial companies in a wide variety of markets exploring the use of the technology in new circuit topologies, packaging solutions and system architectures that are required to achieve and optimise the system advantages offered by GaN transistors. It is this momentum that will drive priorities for the next stages of device research gathered here.

Material science and device physics in SiC technology for high-voltage power devices

Abstract: Power semiconductor devices are key components in power conversion systems. Silicon carbide (SiC) has received increasing attention as a wide-bandgap semiconductor suitable for high-voltage and low-loss power devices. Through recent progress in the crystal growth and process technology of SiC, the production of medium-voltage (600?1700 V) SiC Schottky barrier diodes (SBDs) and power metal?oxide?semiconductor field-effect transistors (MOSFETs) has started. However, basic understanding of the material properties, defect electronics, and the reliability of SiC devices is still poor. In this review paper, the features and present status of SiC power devices are briefly described. Then, several important aspects of the material science and device physics of SiC, such as impurity doping, extended and point defects, and the impact of such defects on device performance and reliability, are reviewed. Fundamental issues regarding SiC SBDs and power MOSFETs are also discussed.

GaN Power Transistors on Si Substrates for Switching Applications

Abstract: In this paper, GaN power transistors on Si substrates for power switching application are reported. GaN heterojunction field-effect transistor (HFET) structure on Si is an important configuration in order to realize a low loss and high power devices as well as one of the cost-effective solutions. Current collapse phenomena are discussed for GaN-HFETs on Si substrate, resulting in suppression of the current collapse due to using the conducting Si substrate. Furthermore, attempts for normally off GaN-FETs were examined. A hybrid metal-oxide-semiconductor HFET structure is a promising candidate for obtaining devices with a lower on-resistance (Ron) and a high breakdown voltage (Vb).