Hongjian Peng

Bio: Hongjian Peng is an academic researcher from Central South University. The author has contributed to research in topics: Acceptor & Organic solar cell. The author has an hindex of 17, co-authored 49 publications receiving 3171 citations.

Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell

Abstract: Finding effective molecular design strategies to enable efficient charge generation and small energy loss is among the long-standing challenges in developing high performance non-fullerene organic solar cells (OSCs). Recently, we reported Y-series non-fullerene acceptors with an electron-deficient-core-based fused structure (typically Y6), opening a new door to achieve high external quantum efficiency (∼80%) while maintaining low energy loss (∼0.57 eV). On this basis, further reducing the energy losses and ultimately improving the performance of OSCs has become a research hotspot. In this paper, we design and synthesize a new member of the Y-series acceptor family, Y18, which adopts a fused benzotriazole segment with unique luminescence properties as its electron-deficient core. Compared to Y6, the benzotriazole-based acceptor Y18 exhibits extended optical absorption and higher voltage. Consequently, the device delivers a promising power conversion efficiency of 16.52% with a very low energy loss of 0.53 eV. Further device optimization by exploiting a ternary blend strategy allowed us to achieve a high efficiency of 17.11% (certified as 16.76% by NREL). Y18 may become one of the most important candidate materials for its broader absorption spectra and higher voltage of Y18 (compared to Y6) in the OSCs field.

Fused Benzothiadiazole: A Building Block for n-Type Organic Acceptor to Achieve High-Performance Organic Solar Cells

Abstract: Narrow bandgap n-type organic semiconductors (n-OS) have attracted great attention in recent years as acceptors in organic solar cells (OSCs), due to their easily tuned absorption and electronic energy levels in comparison with fullerene acceptors. Herein, a new n-OS acceptor, Y5, with an electron-deficient-core-based fused structure is designed and synthesized, which exhibits a strong absorption in the 600-900 nm region with an extinction coefficient of 1.24 × 105 cm-1 , and an electron mobility of 2.11 × 10-4 cm2 V-1 s-1 . By blending Y5 with three types of common medium-bandgap polymers (J61, PBDB-T, and TTFQx-T1) as donors, all devices exhibit high short-circuit current densities over 20 mA cm-2 . As a result, the power conversion efficiency of the Y5-based OSCs with J61, TTFQx-T1, and PBDB-T reaches 11.0%, 13.1%, and 14.1%, respectively. This indicates that Y5 is a universal and highly efficient n-OS acceptor for applications in organic solar cells.

Thieno[3,2-b]pyrrolo-Fused Pentacyclic Benzotriazole-Based Acceptor for Efficient Organic Photovoltaics.

Abstract: A novel nonfullerene small molecular acceptor (BZIC) based on a ladder-type thieno[3,2-b]pyrrolo-fused pentacyclic benzotriazole core (dithieno[3,2-b]pyrrolobenzotriazole, BZTP) and end-capped with 1,1-dicyanomethylene-3-indanone (INCN) has been first reported in this work. Through introducing multifused benzotriazole and INCN, BZIC could maintain a high-lying lowest unoccupied molecular orbital (LUMO) energy level of −3.88 eV. Moreover, BZIC shows a low optical bandgap of 1.45 eV with broad and efficient absorption band from 600 to 850 nm due to increased π–π interactions by the covalently locking thiophene and benzotriazole units. A power conversion efficiency of 6.30% is delivered using BZIC as nonfullerene acceptor and our recently synthesized hexafluoroquinoxaline-based polymer HFQx-T as donor. This is the first time to synthesize mutifused benzotriazole-based molecules as nonfullerene electron acceptor up to date. The preliminary results demonstrate that the mutifused benzotriazole derivatives hold ...

Achieving over 10% efficiency in a new acceptor ITTC and its blends with hexafluoroquinoxaline based polymers

Abstract: A new small molecule, ITTC, bearing an indacenodithieno[3,2-b]thiophene core and a 2-(6-oxo-5,6-dihydro-4H-cyclopenta[c]thiophen-4-ylidene)malononitrile end group, was designed, synthesized and characterized as a non-fullerene electron acceptor. The ITTC possesses strong and broad light absorption, high and balanced charge mobility and a nanoscale interpenetrating morphology when blended with a recently synthesized hexafluoroquinoxaline based polymer donor-HFQx-T. HFQx-T was obtained from a Stille coupling copolymerization of a 2,6-bis(trimethyltin)-4,8-bis(5-(2-ethylhexyl)thiophene-2-yl)benzo[1,2-b:4,5-b′]dithiophene electron donating unit and a hexafluoroquinoxaline based electron accepting unit. The device employing HFQx-T as the donor and ITTC as the acceptor delivered a power conversion efficiency (PCE) of 8.19% without any post-treatment. After thermal annealing, an impressive PCE of 10.4% was obtained. This performance is among the highest PCEs reported for fullerene-free polymer solar cells up to date. This study demonstrates the great potential of ITTC as n-type materials for organic electronics.

Over 16% efficiency organic photovoltaic cells enabled by a chlorinated acceptor with increased open-circuit voltages

Abstract: Broadening the optical absorption of organic photovoltaic (OPV) materials by enhancing the intramolecular push-pull effect is a general and effective method to improve the power conversion efficiencies of OPV cells. However, in terms of the electron acceptors, the most common molecular design strategy of halogenation usually results in down-shifted molecular energy levels, thereby leading to decreased open-circuit voltages in the devices. Herein, we report a chlorinated non-fullerene acceptor, which exhibits an extended optical absorption and meanwhile displays a higher voltage than its fluorinated counterpart in the devices. This unexpected phenomenon can be ascribed to the reduced non-radiative energy loss (0.206 eV). Due to the simultaneously improved short-circuit current density and open-circuit voltage, a high efficiency of 16.5% is achieved. This study demonstrates that finely tuning the OPV materials to reduce the bandgap-voltage offset has great potential for boosting the efficiency. Halogenation has proved an effective strategy to improve the power conversion efficiencies of organic solar cells but it usually leads to lower open-circuit voltages. Here, Cui et al. unexpectedly obtain higher open-circuit voltages and achieve a record high PCE of 16.5% by chlorination.

Single-Junction Organic Photovoltaic Cells with Approaching 18% Efficiency.

Abstract: Optimizing the molecular structures of organic photovoltaic (OPV) materials is one of the most effective methods to boost power conversion efficiencies (PCEs). For an excellent molecular system with a certain conjugated skeleton, fine tuning the alky chains is of considerable significance to fully explore its photovoltaic potential. In this work, the optimization of alkyl chains is performed on a chlorinated nonfullerene acceptor (NFA) named BTP-4Cl-BO (a Y6 derivative) and very impressive photovoltaic parameters in OPV cells are obtained. To get more ordered intermolecular packing, the n-undecyl is shortened at the edge of BTP-eC11 to n-nonyl and n-heptyl. As a result, the NFAs of BTP-eC9 and BTP-eC7 are synthesized. The BTP-eC7 shows relatively poor solubility and thus limits its application in device fabrication. Fortunately, the BTP-eC9 possesses good solubility and, at the same time, enhanced electron transport property than BTP-eC11. Significantly, due to the simultaneously enhanced short-circuit current density and fill factor, the BTP-eC9-based single-junction OPV cells record a maximum PCE of 17.8% and get a certified value of 17.3%. These results demonstrate that minimizing the alkyl chains to get suitable solubility and enhanced intermolecular packing has a great potential in further improving its photovoltaic performance.

Non-fullerene acceptors with branched side chains and improved molecular packing to exceed 18% efficiency in organic solar cells

Abstract: Molecular design of non-fullerene acceptors is of vital importance for high-efficiency organic solar cells. The branched alkyl chain modification is often regarded as a counter-intuitive approach, as it may introduce an undesirable steric hindrance that reduces charge transport in non-fullerene acceptors. Here we show the design and synthesis of a highly efficient non-fullerene acceptor family by substituting the beta position of the thiophene unit on a Y6-based dithienothiophen[3,2-b]-pyrrolobenzothiadiazole core with branched alkyl chains. It was found that such a modification to a different alkyl chain length could completely change the molecular packing behaviour of non-fullerene acceptors, leading to improved structural order and charge transport in thin films. An unprecedented efficiency of 18.32% (certified value of 17.9%) with a fill factor of 81.5% is achieved for single-junction organic solar cells. This work reveals the importance of the branched alkyl chain topology in tuning the molecular packing and blend morphology, which leads to improved organic photovoltaic performance. Molecular design of acceptor and donor molecules has enabled major progress in organic photovoltaics. Li et al. show that branched alkyl chains in non-fullerene acceptors allow favourable morphology in the active layer, enabling a certified device efficiency of 17.9%.