Hongwen He

Bio: Hongwen He is an academic researcher from Beijing Institute of Technology. The author has contributed to research in topics: State of charge & Battery (electricity). The author has an hindex of 17, co-authored 24 publications receiving 3104 citations.

Evaluation of Lithium-Ion Battery Equivalent Circuit Models for State of Charge Estimation by an Experimental Approach

Abstract: To improve the use of lithium-ion batteries in electric vehicle (EV) applications, evaluations and comparisons of different equivalent circuit models are presented in this paper. Based on an analysis of the traditional lithium-ion battery equivalent circuit models such as the Rint, RC, Thevenin and PNGV models, an improved Thevenin model, named dual polarization (DP) model, is put forward by adding an extra RC to simulate the electrochemical polarization and concentration polarization separately. The model parameters are identified with a genetic algorithm, which is used to find the optimal time constant of the model, and the experimental data from a Hybrid Pulse Power Characterization (HPPC) test on a LiMn2O4 battery module. Evaluations on the five models are carried out from the point of view of the dynamic performance and the state of charge (SoC) estimation. The dynamic performances of the five models are obtained by conducting the Dynamic Stress Test (DST) and the accuracy of SoC estimation with the Robust Extended Kalman Filter (REKF) approach is determined by performing a Federal Urban Driving Schedules (FUDS) experiment. By comparison, the DP model has the best dynamic performance and provides the most accurate SoC estimation. Finally, sensitivity of the different SoC initial values is investigated based on the accuracy of SoC estimation with the REKF approach based on the DP model. It is clear that the errors resulting from the SoC initial value are significantly reduced and the true SoC is convergent within an acceptable error.

State-of-Charge Estimation of the Lithium-Ion Battery Using an Adaptive Extended Kalman Filter Based on an Improved Thevenin Model

Abstract: An adaptive Kalman filter algorithm is adopted to estimate the state of charge (SOC) of a lithium-ion battery for application in electric vehicles (EVs). Generally, the Kalman filter algorithm is selected to dynamically estimate the SOC. However, it easily causes divergence due to the uncertainty of the battery model and system noise. To obtain a better convergent and robust result, an adaptive Kalman filter algorithm that can greatly improve the dependence of the traditional filter algorithm on the battery model is employed. In this paper, the typical characteristics of the lithium-ion battery are analyzed by experiment, such as hysteresis, polarization, Coulomb efficiency, etc. In addition, an improved Thevenin battery model is achieved by adding an extra RC branch to the Thevenin model, and model parameters are identified by using the extended Kalman filter (EKF) algorithm. Further, an adaptive EKF (AEKF) algorithm is adopted to the SOC estimation of the lithium-ion battery. Finally, the proposed method is evaluated by experiments with federal urban driving schedules. The proposed SOC estimation using AEKF is more accurate and reliable than that using EKF. The comparison shows that the maximum SOC estimation error decreases from 14.96% to 2.54% and that the mean SOC estimation error reduces from 3.19% to 1.06%.

Evaluation on State of Charge Estimation of Batteries With Adaptive Extended Kalman Filter by Experiment Approach

Abstract: An accurate State-of-Charge (SoC) estimation plays a significant role in battery systems used in electric vehicles due to the arduous operation environments and the requirement of ensuring safe and reliable operations of batteries. Among the conventional methods to estimate SoC, the Coulomb counting method is widely used, but its accuracy is limited due to the accumulated error. Another commonly used method is model-based online iterative estimation with the Kalman filters, which improves the estimation accuracy in some extent. To improve the performance of Kalman filters in SoC estimation, the adaptive extended Kalman filter (AEKF), which employs the covariance matching approach, is applied in this paper. First, we built an implementation flowchart of the AEKF for a general system. Second, we built an online open-circuit voltage (OCV) estimation approach with the AEKF algorithm so that we can then get the SoC estimate by looking up the OCV-SoC table. Third, we proposed a robust online model-based SoC estimation approach with the AEKF algorithm. Finally, an evaluation on the SoC estimation approaches is performed by the experiment approach from the aspects of SoC estimation accuracy and robustness. The results indicate that the proposed online SoC estimation with the AEKF algorithm performs optimally, and for different error initial values, the maximum SoC estimation error is less than 2% with close-loop state estimation characteristics.

A review of lithium-ion battery state of charge estimation and management system in electric vehicle applications: Challenges and recommendations

Abstract: Due to increasing concerns about global warming, greenhouse gas emissions, and the depletion of fossil fuels, the electric vehicles (EVs) receive massive popularity due to their performances and efficiencies in recent decades. EVs have already been widely accepted in the automotive industries considering the most promising replacements in reducing CO2 emissions and global environmental issues. Lithium-ion batteries have attained huge attention in EVs application due to their lucrative features such as lightweight, fast charging, high energy density, low self-discharge and long lifespan. This paper comprehensively reviews the lithium-ion battery state of charge (SOC) estimation and its management system towards the sustainable future EV applications. The significance of battery management system (BMS) employing lithium-ion batteries is presented, which can guarantee a reliable and safe operation and assess the battery SOC. The review identifies that the SOC is a crucial parameter as it signifies the remaining available energy in a battery that provides an idea about charging/discharging strategies and protect the battery from overcharging/over discharging. It is also observed that the SOC of the existing lithium-ion batteries have a good contribution to run the EVs safely and efficiently with their charging/discharging capabilities. However, they still have some challenges due to their complex electro-chemical reactions, performance degradation and lack of accuracy towards the enhancement of battery performance and life. The classification of the estimation methodologies to estimate SOC focusing with the estimation model/algorithm, benefits, drawbacks and estimation error are extensively reviewed. The review highlights many factors and challenges with possible recommendations for the development of BMS and estimation of SOC in next-generation EV applications. All the highlighted insights of this review will widen the increasing efforts towards the development of the advanced SOC estimation method and energy management system of lithium-ion battery for the future high-tech EV applications.

A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles

Abstract: Power train electrification is promoted as a potential alternative to reduce carbon intensity of transportation. Lithium-ion batteries are found to be suitable for hybrid electric vehicles (HEVs) and pure electric vehicles (EVs), and temperature control on lithium batteries is vital for long-term performance and durability. Unfortunately, battery thermal management (BTM) has not been paid close attention partly due to poor understanding of battery thermal behaviour. Cell performance change dramatically with temperature, but it improves with temperature if a suitable operating temperature window is sustained. This paper provides a review on two aspects that are battery thermal model development and thermal management strategies. Thermal effects of lithium-ion batteries in terms of thermal runaway and response under cold temperatures will be studied, and heat generation methods are discussed with aim of performing accurate battery thermal analysis. In addition, current BTM strategies utilised by automotive suppliers will be reviewed to identify the imposing challenges and critical gaps between research and practice. Optimising existing BTMs and exploring new technologies to mitigate battery thermal impacts are required, and efforts in prioritising BTM should be made to improve the temperature uniformity across the battery pack, prolong battery lifespan, and enhance the safety of large packs.