Hongyan Fu

Bio: Hongyan Fu is an academic researcher from Tsinghua University. The author has contributed to research in topics: Visible light communication & Optical wireless. The author has an hindex of 14, co-authored 203 publications receiving 1284 citations. Previous affiliations of Hongyan Fu include Hong Kong Polytechnic University & Huawei.

Pressure sensor realized with polarization-maintaining photonic crystal fiber-based Sagnac interferometer.

Abstract: A novel intrinsic fiber optic pressure sensor realized with a polarization-maintaining photonic crystal fiber (PM-PCF) based Sagnac interferometer is proposed and demonstrated experimentally. A large wavelength-pressure coefficient of 3.42 nm/MPa was measured using a 58.4 cm long PM-PCF as the sensing element. Owing to the inherently low bending loss and thermal dependence of the PM-PCF, the proposed pressure sensor is very compact and exhibits low temperature sensitivity.

High-pressure and high-temperature characteristics of a Fabry―Perot interferometer based on photonic crystal fiber

Abstract: A fiber-optic Fabry-Perot interferometer was constructed by splicing a short length of photonic crystal fiber to a standard single-mode fiber. The photonic crystal fiber functions as a Fabry-Perot cavity and serves as a direct sensing probe without any additional components. Its pressure and temperature responses in the range of 0-40 MPa and 25°C-700°C were experimentally studied. The proposed sensor is easy to fabricate, potentially low-cost, and compact in size, which makes it very attractive for high-pressure and high-temperature sensing applications.

High pressure sensor based on photonic crystal fiber for downhole application

Abstract: We demonstrate a polarization-maintaining (PM) photonic crystal fiber (PCF) based Sagnac interferometer for downhole high pressure sensing application. The PM PCF serves as a direct pressure sensing probe. The sensor is transducer free and thus fundamentally enhances its long-term sensing stability. In addition, the PM PCF can be coiled into a small diameter to fulfill the compact size requirement of downhole application. A theoretical study of its loss and birefringence changes with different coiling diameters has been carried out. This bend-insensitive property of the fiber provides ease for sensor design and benefits practical application. The pressure sensitivities of the proposed sensor are 4.21 and 3.24 nm/MPa at ∼1320 and ∼1550 nm, respectively. High pressure measurement up to 20 MPa was achieved with our experiment. It shows both good linearity in response to applied pressure and good repeatability within the entire measurement range. The proposed pressure sensor exhibits low temperature cross sensitivity and high temperature sustainability. It functions well without any measurable degradation effects on sensitivity or linearity at a temperature as high as 293 °C. These characteristics make it a potentially ideal candidate for downhole pressure sensing.

Edge Couplers in Silicon Photonic Integrated Circuits: A Review

Abstract: Silicon photonics has drawn increasing attention in the past few decades and is a promising key technology for future daily applications due to its various merits including ultra-low cost, high integration density owing to the high refractive index of silicon, and compatibility with current semiconductor fabrication process. Optical interconnects is an important issue in silicon photonic integrated circuits for transmitting light, and fiber-to-chip optical interconnects is vital in application scenarios such as data centers and optical transmission systems. There are mainly two categories of fiber-to-chip optical coupling: off-plane coupling and in-plane coupling. Grating couplers work under the former category, while edge couplers function as in-plane coupling. In this paper, we mainly focus on edge couplers in silicon photonic integrated circuits. We deliver an introduction to the research background, operation mechanisms, and design principles of silicon photonic edge couplers. The state-of-the-art of edge couplers is reviewed according to the different structural configurations of the device, while identifying the performance, fabrication feasibility, and applications. In addition, a brief comparison between edge couplers and grating couplers is conducted. Packaging issues are also discussed, and several prospective techniques for further improvements of edge couplers are proposed.

Grating Couplers on Silicon Photonics: Design Principles, Emerging Trends and Practical Issues.

Abstract: Silicon photonics is an enabling technology that provides integrated photonic devices and systems with low-cost mass manufacturing capability. It has attracted increasing attention in both academia and industry in recent years, not only for its applications in communications, but also in sensing. One important issue of silicon photonics that comes with its high integration density is an interface between its high-performance integrated waveguide devices and optical fibers or free-space optics. Surface grating coupler is a preferred candidate that provides flexibility for circuit design and reduces effort for both fabrication and alignment. In the past decades, considerable research efforts have been made on in-plane grating couplers to address their insufficiency in coupling efficiency, wavelength sensitivity and polarization sensitivity compared with out-of-plane edge-coupling. Apart from improved performances, new functionalities are also on the horizon for grating couplers. In this paper, we review the current research progresses made on grating couplers, starting from their fundamental theories and concepts. Then, we conclude various methods to improve their performance, including coupling efficiency, polarization and wavelength sensitivity. Finally, we discuss some emerging research topics on grating couplers, as well as practical issues such as testing, packaging and promising applications.

Fiber Optic Sensors in Structural Health Monitoring

Abstract: Structural Health Monitoring (SHM) can be understood as the integration of sensing and intelligence to enable the structure loading and damage-provoking conditions to be recorded, analyzed, localized, and predicted in such a way that nondestructive testing becomes an integral part of them. In addition, SHM systems can include actuation devices to take proper reaction or correction actions. SHM sensing requirements are very well suited for the application of optical fiber sensors (OFS), in particular, to provide integrated, quasi-distributed or fully distributed technologies. In this tutorial, after a brief introduction of the basic SHM concepts, the main fiber optic techniques available for this application are reviewed, emphasizing the four most successful ones. Then, several examples of the use of OFS in real structures are also addressed, including those from the renewable energy, transportation, civil engineering and the oil and gas industry sectors. Finally, the most relevant current technical challenges and the key sector markets are identified. This paper provides a tutorial introduction, a comprehensive background on this subject and also a forecast of the future of OFS for SHM. In addition, some of the challenges to be faced in the near future are addressed.

Interferometric Fiber Optic Sensors

Abstract: Fiber optic interferometers to sense various physical parameters including temperature, strain, pressure, and refractive index have been widely investigated. They can be categorized into four types: Fabry-Perot, Mach-Zehnder, Michelson, and Sagnac. In this paper, each type of interferometric sensor is reviewed in terms of operating principles, fabrication methods, and application fields. Some specific examples of recently reported interferometeric sensor technologies are presented in detail to show their large potential in practical applications. Some of the simple to fabricate but exceedingly effective Fabry-Perot interferometers, implemented in both extrinsic and intrinsic structures, are discussed. Also, a wide variety of Mach-Zehnder and Michelson interferometric sensors based on photonic crystal fibers are introduced along with their remarkable sensing performances. Finally, the simultaneous multi-parameter sensing capability of a pair of long period fiber grating (LPG) is presented in two types of structures; one is the Mach-Zehnder interferometer formed in a double cladding fiber and the other is the highly sensitive Sagnac interferometer cascaded with an LPG pair.