Hongyu Luo

Bio: Hongyu Luo is an academic researcher from University of Electronic Science and Technology of China. The author has contributed to research in topics: Fiber laser & Laser. The author has an hindex of 17, co-authored 59 publications receiving 1420 citations.

Black phosphorus: a two-dimension saturable absorption material for mid-infrared Q-switched and mode-locked fiber lasers

Abstract: Black phosphorus (BP) as a novel class of two-dimension (2D) materials has recently attracted enormous attention as a result of its unique physical and chemical features. The remarkably strong light-matter interaction and tunable direct band-gap at a wide range make it an ideal candidate especially in the mid-infrared wavelength region as the saturable absorber (SA). In this paper, the simple and effective liquid phase exfoliation (LPE) method was used to fabricate BP. By introducing the same BP SA into two specifically designed rare earth ions doped fluoride fiber lasers at mid-infrared wavebands, Q-switching with the pulse energy of 4.93 μJ and mode-locking with the pulse duration of 8.6 ps were obtained, respectively. The operation wavelength of ~2970 nm for generated pulse is the reported longest wavelength for BP SA based fiber lasers.

A robust and tuneable mid-infrared optical switch enabled by bulk Dirac fermions

Abstract: Pulsed lasers operating in the mid-infrared (3–20 μm) are important for a wide range of applications in sensing, spectroscopy, imaging and communications. Despite recent advances with mid-infrared gain platforms, the lack of a capable pulse generation mechanism remains a significant technological challenge. Here we show that bulk Dirac fermions in molecular beam epitaxy grown crystalline Cd3As2, a three-dimensional topological Dirac semimetal, constitutes an exceptional ultrafast optical switching mechanism for the mid-infrared. Significantly, we show robust and effective tuning of the scattering channels of Dirac fermions via an element doping approach, where photocarrier relaxation times are found flexibly controlled over an order of magnitude (from 8 ps to 800 fs at 4.5 μm). Our findings reveal the strong impact of Cr doping on ultrafast optical properties in Cd3As2 and open up the long sought parameter space crucial for the development of compact and high-performance mid-infrared ultrafast sources. Mid-infrared pulsed sources are technologically important for sensing and spectroscopy but their implementation is challenging due to the lack of a tuneable optical switch. Here, the authors address this limitation by engineering the band structure of an emerging Dirac semimetal, Cd3As2.

All-fiber passively mode-locked Tm-doped NOLM-based oscillator operating at 2-μm in both soliton and noisy-pulse regimes.

Abstract: A self-starting all-fiber passively mode-locked Tm-doped fiber laser based on nonlinear loop mirror (NOLM) is demonstrated. Stable soliton pulses centered at 2017.33 nm with 1.56 nm FWHM were produced at a repetition rate of 1.514 MHz with pulse duration of 2.8 ps and pulse energy of 83.8 pJ. As increased pump power, the oscillator can also operate at noise-like (NL) regime. Stable NL pulses with coherence spike width of 341 fs and pulse energy of up to 249.32 nJ was achieved at a center wavelength of 2017.24 nm with 21.33 nm FWHM. To the best of our knowledge, this is the first 2 μm region NOLM-based mode-locked fiber laser operating at two regimes with the highest single pulse energy for NL pulses.

3-μm Mid-infrared pulse generation using topological insulator as the saturable absorber.

Abstract: We report an 1150-nm diode-pump passively Q-switched Ho3+-doped ZBLAN fiber laser using topological insulator (TI): Bi2Te3 as the saturable absorber (SA). The TI: Bi2Te3 prepared using the cost-effective hydrothermal intercalation/exfoliation method was dropped onto a CaF2 substrate to fabricate the free-space SA component. It has a low saturable peak intensity of 2.12 MW/cm2 and a high modulation depth of 51.3% measured at 2 μm. Inserting this component into a linear-cavity Ho3+-doped ZBLAN fiber laser, stable Q-switched pulses at 2979.9 nm were obtained with the repetition rate of 81.96 kHz and pulse duration of 1.37 μs. The achieved maximum output power and pulse energy were 327.4 mW at a slope efficiency of 11.6% and 3.99 μJ, respectively, only limited by the available pump power. Our work reveals that the TIs are absolutely a class of promising and reliable SAs for pulse generation at 3-μm mid-infrared waveband.

Wide wavelength selectable all-fiber thulium doped fiber laser between 1925 nm and 2200 nm

Abstract: We demonstrate an all-fiber Tm3+-doped silica fiber laser operating at a wide selectable wavelength range by using different fiber Bragg gratings (FBGs) as wavelength selection elements. With a specifically designed high reflective (HR) FBG and the fiber end as an output coupler, the lasing in the range from 1975 nm to 2150 nm with slope efficiency of >30% can be achieved. By employing a low reflective (LR) FBG as the output coupler, the obtainable wavelengths were extended to the range between 1925 nm and 2200 nm which is the reported longest wavelength from the Tm3+-doped silica fiber lasers. Furthermore, by employing a FBG array in the laser cavity and inducing bend loss between adjacent FBGs in the array, six switchable lasing wavelengths were achieved. © 2014 Optical Society of America.

Recent developments in emerging two-dimensional materials and their applications

Abstract: The technological evolution has been progressing for centuries and will possibly increase at a higher rate in the 21st century. Currently, in this age of nanotechnology, the discovery of more economical and sustainable novel materials has considerably increased. The abundance of two-dimensional (2D) materials has endowed them with a broad material platform in technical studies and in the expansion of nano- and atomic-level applications. The innovation of graphene has motivated considerable attention to the study of other novel 2D materials, known as modern day “alchemy”, by which scientists are trying to convert most possible periodic table elements into 2D material structures and forms. 2D material devices with high quality and good optical encoder performance have a multitude of industrial applications. However, their stability and large size restrict their applications, but these problems can be overcome by functionalization and substrate-based formation of 2D materials. Therefore, via this review, first, basic attributes of 2D materials are described, and the mechanisms to further enhance their properties are also summarized. Second, the applications of 2D materials are discussed, along with their advantages and disadvantages. Finally, some effective device-fabrication approaches, such as heterostructure approaches, are applied to further enhance the properties of 2D materials; their novel device applications and opportunities are also presented. This updated review may provide new avenues for 2D material synthesis and development of more efficient devices compared to conventional devices in different fields.

Q-switched fiber laser based on transition metal dichalcogenides MoS 2 , MoSe 2 , WS 2 , and WSe 2

Abstract: In this paper, we report 4 different saturable absorbers based on 4 transition metal dichalcogenides (MoS2, MoSe2, WS2, WSe2) and utilize them to Q-switch a ring-cavity fiber laser with identical cavity configuration. It is found that MoSe2 exhibits highest modulation depth with similar preparation process among four saturable absorbers. Q-switching operation performance is compared from the aspects of RF spectrum, optical spectrum, repetition rate and pulse duration. WS2 Q-switched fiber laser generates the most stable pulse trains compared to other 3 fiber lasers. These results demonstrate the feasibility of TMDs to Q-switch fiber laser effectively and provide a meaningful reference for further research in nonlinear fiber optics with these TMDs materials.

2D Materials for Optical Modulation: Challenges and Opportunities.

Abstract: Owing to their atomic layer thickness, strong light–material interaction, high nonlinearity, broadband optical response, fast relaxation, controllable optoelectronic properties, and high compatibility with other photonic structures, 2D materials, including graphene, transition metal dichalcogenides and black phosphorus, have been attracting increasing attention for photonic applications. By tuning the carrier density via electrical or optical means that modifies their physical properties (e.g., Fermi level or nonlinear absorption), optical response of the 2D materials can be instantly changed, making them versatile nanostructures for optical modulation. Here, up-to-date 2D material-based optical modulation in three categories is reviewed: free-space, fiber-based, and on-chip configurations. By analysing cons and pros of different modulation approaches from material and mechanism aspects, the challenges faced by using these materials for device applications are presented. In addition, thermal effects (e.g., laser induced damage) in 2D materials, which are critical to practical applications, are also discussed. Finally, the outlook for future opportunities of these 2D materials for optical modulation is given.