scispace - formally typeset
Search or ask a question
Author

Hossin Hosseinian

Bio: Hossin Hosseinian is an academic researcher. The author has contributed to research in topics: Static VAR compensator & Low-power electronics. The author has an hindex of 2, co-authored 3 publications receiving 2069 citations.

Papers
More filters
01 Sep 2010

2,148 citations

01 Sep 2010

4 citations

01 Sep 2010

2 citations


Cited by
More filters
Book
01 Jan 2008
TL;DR: In this paper, the authors present a classification of power supplies in DC-DC Converters, including voltage, current, voltage, energy, and power, and discuss the relationship among them.
Abstract: Preface. About the Author. List of Symbols. 1 Introduction. 1.1 Classification of Power Supplies. 1.2 Basic Functions of Voltage Regulators. 1.3 Power Relationships in DC-DC Converters. 1.4 DC Transfer Functions of DC-DC Converters. 1.5 Static Characteristics of DC Voltage Regulators. 1.6 Dynamic Characteristics of DC Voltage Regulators. 1.7 Linear Voltage Regulators. 1.8 Topologies of PWM DC-DC Converters 1.9 Relationships among Current, Voltage, Energy, and Power. 1.10 Electromagnetic Compatibility. 1.11 Summary. 1.12 References. 1.13 Review Questions. 1.14 Problems. 2 BuckPWMDC-DCConverter. 2.1 Introduction. 2.2 DC Analysis of PWM Buck Converter for CCM. 2.3 DC Analysis of PWM Buck Converter for DCM. 2.4 Buck Converter with Input Filter. 2.5 Buck Converter with Synchronous Rectifier. 2.6 Buck Converter with Positive Common Rail. 2.7 Tapped-Inductor Buck Converters. 2.8 Multiphase Buck Converter. 2.9 Summary. 2.10 References. 2.11 Review Questions. 2.12 Problems. 3 Boost PWM DC-DC Converter. 3.1 Introduction. 3.2 DC Analysis of PWM Boost Converter for CCM. 3.3 DC Analysis of PWM Boost Converter for DCM. 3.4 Bidirectional Buck and Boost Converters. 3.5 Tapped-Inductor Boost Converters. 3.6 Duality. 3.7 Power Factor Correction. 3.8 Summary. 3.9 References. 3.10 Review Questions. 3.11 Problems. 4 Buck-Boost PWM DC-DC Converter. 4.1 Introduction. 4.2 DC Analysis of PWM Buck-Boost Converter for CCM. 4.3 DC Analysis of PWM Buck-Boost Converter for DCM. 4.4 Bidirectional Buck-Boost Converter. 4.5 Synthesis of Buck-Boost Converter. 4.6 Synthesis of Boost-Buck (Cuk) Converter. 4.7 Noninverting Buck-Boost Converters. 4.8 Tapped-Inductor Buck-Boost Converters. 4.9 Summary. 4.10 References. 4.11 Review Questions. 4.12 Problems. 5 Flyback PWM DC-DC Converter. 5.1 Introduction. 5.2 Transformers. 5.3 DC Analysis of PWM Flyback Converter for CCM. 5.4 DC Analysis of PWM Flyback Converter for DCM. 5.5 Multiple-Output Flyback Converter. 5.6 Bidirectional Flyback Converter. 5.7 Ringing in Flyback Converter. 5.8 Flyback Converter with Active Clamping. 5.9 Two-Transistor Flyback Converter. 5.10 Summary. 5.11 References. 5.12 Review Questions. 5.13 Problems. 6 Forward PWM DC-DC Converter. 6.1 Introduction. 6.2 DC Analysis of PWM Forward Converter for CCM. 6.3 DC Analysis of PWM Forward Converter for DCM. 6.4 Multiple-Output Forward Converter. 6.5 Forward Converter with Synchronous Rectifier. 6.6 Forward Converters with Active Clamping. 6.7 Two-Switch Forward Converter. 6.8 Summary. 6.9 References. 6.10 Review Questions. 6.11 Problems. 7 Half-Bridge PWM DC-DC Converter. 7.1 Introduction. 7.2 DC Analysis of PWM Half-Bridge Converter for CCM. 7.3 DC Analysis of PWM Half-Bridge Converter for DCM. 7.4 Summary. 7.5 References. 7.6 Review Questions. 7.7 Problems. 8 Full-Bridge PWM DC-DC Converter. 8.1 Introduction. 8.2 DC Analysis of PWM Full-Bridge Converter for CCM. 8.3 DC Analysis of PWM Full-Bridge Converter for DCM. 8.4 Phase-Controlled Full-Bridge Converter. 8.5 Summary. 8.6 References. 8.7 Review Questions. 8.8 Problems. 9 Push-Pull PWM DC-DC Converter. 9.1 Introduction. 9.2 DC Analysis of PWM Push-Pull Converter for CCM. 9.3 DC Analysis of PWM Push-Pull Converter for DCM. 9.4 Comparison of PWM DC-DC Converters. 9.5 Summary. 9.6 References. 9.7 Review Questions. 9.8 Problems. 10 Small-Signal Models of PWM Converters for CCM and DCM. 10.1 Introduction. 10.2 Assumptions. 10.3 Averaged Model of Ideal Switching Network for CCM. 10.4 Averaged Values of Switched Resistances. 10.5 Model Reduction. 10.6 Large-Signal Averaged Model for CCM. 10.7 DC and Small-Signal Circuit Linear Models of Switching Network for CCM. 10.8 Family of PWM Converter Models for CCM. 10.9 PWM Small-Signal Switch Model for CCM. 10.10 Modeling of the Ideal Switching Network for DCM. 10.11 Averaged Parasitic Resistances for DCM. 10.12 Small-Signal Models of PWM Converters for DCM. 10.13 Summary. 10.14 References. 10.15 Review Questions. 10.16 Problems. 11 Open-Loop Small-Signal Characteristics of Boost Converter for CCM. 11.1 Introduction. 11.2 DC Characteristics. 11.3 Open-Loop Control-to-Output Transfer Function. 11.4 Delay in Open-Loop Control-to-Output Transfer Function. 11.5 Open-Loop Audio Susceptibility. 11.6 Open-Loop Input Impedance. 11.7 Open-Loop Output Impedance. 11.8 Open-Loop Step Responses. 11.9 Summary. 11.10 References. 11.11 Review Questions. 11.12 Problems. 12 Voltage-Mode Control of Boost Converter. 12.1 Introduction. 12.2 Circuit of Boost Converter with Voltage-Mode Control. 12.3 Pulse-Width Modulator. 12.4 Transfer Function of Modulator, Boost Converter Power Stage, and Feedback Network. 12.5 Error Amplifier. 12.6 Integral-Single-Lead Controller. 12.7 Integral-Double-Lead Controller. 12.8 Loop Gain. 12.9 Closed-Loop Control-to-Output Voltage Transfer Function. 12.10 Closed-Loop Audio Susceptibility. 12.11 Closed-Loop Input Impedance. 12.12 Closed-Loop Output Impedance. 12.13 Closed-Loop Step Responses. 12.14 Closed-Loop DC Transfer Functions. 12.15 Summary. 12.16 References. 12.17 Review Questions. 12.18 Problems. 13 Current-Mode Control. 13.1 Introduction. 13.2 Principle of Operation of PWM Converters with Peak-Current-Mode Control. 13.3 Relationship between Duty Cycle and Inductor-Current Slopes. 13.4 Instability of Closed-Current Loop. 13.5 Slope Compensation. 13.6 Sample-and-Hold Effect on Current Loop. 13.7 Current Loop in s -Domain. 13.8 Voltage Loop of PWM Converters with Current-Mode Control. 13.9 Feedforward Gains in PWM Converters with Current-Mode Control without Slope Compensation. 13.10 Feedforward Gains in PWM Converters with Current-Mode Control and Slope Compensation. 13.11 Closed-Loop Transfer Functions with Feedforward Gains. 13.12 Slope Compensation by Adding a Ramp to Inductor Current. 13.13 Relationships for Constant-Frequency Current-Mode On-Time Control. 13.14 Summary. 13.15 References. 13.16 Review Questions. 13.17 Problems. 13.18 Appendix: Sample-and-Hold Modeling. 14 Current-Mode Control of Boost Converter. 14.1 Introduction. 14.2 Open-Loop Small-Signal Transfer Functions. 14.3 Open-Loop Step Responses of Inductor Current. 14.5 Closed-Voltage-Loop Transfer Functions. 14.6 Closed-Loop Step Responses. 14.7 Closed-Loop DC Transfer Functions. 14.8 Summary. 14.9 References. 14.10 Review Questions. 14.11 Problems. 15 Silicon and Silicon Carbide Power Diodes. 15.1 Introduction. 15.2 Electronic Power Switches. 15.3 Intrinsic Semiconductors. 15.4 Extrinsic Semiconductors. 15.5 Silicon and Silicon Carbide. 15.6 Physical Structure of Junction Diodes. 15.7 Static I - V Diode Characteristic. 15.8 Breakdown Voltage of Junction Diodes. 15.9 Capacitances of Junction Diodes. 15.10 Reverse Recovery of pn Junction Diodes. 15.11 Schottky Diodes. 15.12 SPICE Model of Diodes. 15.13 Summary. 15.14 References. 15.15 Review Questions. 15.16 Problems. 16 Silicon and Silicon Carbide Power MOSFETs. 16.1 Introduction. 16.2 Physical Structure of Power MOSFETs. 16.3 Principle of Operation of Power MOSFETs. 16.4 Derivation of Power MOSFET Characteristics. 16.5 Power MOSFET Characteristics. 16.6 Mobility of Charge Carriers. 16.7 Short-Channel Effects. 16.8 Aspect Ratio of Power MOSFETs. 16.9 Breakdown Voltage of Power MOSFETs. 16.10 Gate Oxide Breakdown Voltageof Power MOSFETs. 16.11 Resistance of Drift Region. 16.12 Figures-of-Merit. 16.13 On-Resistance of Power MOSFETs. 16.14 Capacitances of Power MOSFETs. 16.15 Switching Waveforms. 16.16 SPICE Model of Power MOSFETs. 16.17 Insulated Gate Bipolar Transistors. 16.18 Heat Sinks. 16.19 Summary. 16.20 References. 16.21 Review Questions. 16.22 Problems. 17 Soft-Switching DC-DC Converters. 17.1 Introduction. 17.2 Zero-Voltage-Switching DC-DC Converters. 17.3 Buck ZVS Quasi-Resonant DC-DC Converter. 17.4 Boost ZVS Quasi-Resonant DC-DC Converter. 17.5 Zero-Current-Switching DC-DC Converters. 17.6 Boost ZCS Quasi-Resonant DC-DC Converter. 17.7 Multiresonant Converters. 17.8 Summary. 17.9 References. 17.10 Review Questions. 17.11 Problems. Appendix A Introduction to SPICE. Appendix B Introduction to MATLAB. Answers to Problems. Index.

734 citations

Journal ArticleDOI
TL;DR: This paper will propose a single-phase transformerless inverter circuit being composed of the association of two step-down converters, which is possible to achieve a high level of efficiency and reliability.
Abstract: Driven by worldwide demand for renewable sources, the photovoltaic market saw in the last years a considerable amount of innovations regarding the construction and operation of inverters connected to the grid. One significant advance, among some that will be here discussed is, for example, the abolition of the galvanic isolation in inverters installed in Germany. There, transformerless topologies, like the H5 and Heric, can reach very high levels of efficiency and allow the best cost-benefit ratio for low-power grid-tied systems. This paper will follow this direction and propose a single-phase transformerless inverter circuit being composed of the association of two step-down converters. Each one modulates a half-wave of the output current, as the correct polarity of the connection to the grid is provided by low-frequency switches. Due to its straightforward design, reduced amount of semiconductors, and simple operation, it is possible to achieve a high level of efficiency and reliability. These and some other characteristics will be benchmarked against other existing circuits, being followed by a theoretical analysis on the properties of the proposed solution. The project of a laboratory prototype will be presented, along with a discussion about the obtained experimental results.

627 citations

Journal ArticleDOI
TL;DR: This paper presents a single-phase five-level photovoltaic inverter topology for grid-connected PV systems with a novel pulsewidth-modulated (PWM) control scheme that offers much less total harmonic distortion and can operate at near-unity power factor.
Abstract: This paper presents a single-phase five-level photovoltaic (PV) inverter topology for grid-connected PV systems with a novel pulsewidth-modulated (PWM) control scheme. Two reference signals identical to each other with an offset equivalent to the amplitude of the triangular carrier signal were used to generate PWM signals for the switches. A digital proportional-integral current control algorithm is implemented in DSP TMS320F2812 to keep the current injected into the grid sinusoidal and to have high dynamic performance with rapidly changing atmospheric conditions. The inverter offers much less total harmonic distortion and can operate at near-unity power factor. The proposed system is verified through simulation and is implemented in a prototype, and the experimental results are compared with that with the conventional single-phase three-level grid-connected PWM inverter.

584 citations

Journal ArticleDOI
TL;DR: In this article, the authors provide an overview and potential applications of the superconducting magnetic energy storage (SMES) technology in electrical power and energy systems, and a comparison is made among these three types of SMES.
Abstract: Superconducting magnetic energy storage (SMES) is known to be a very good energy storage device. This article provides an overview and potential applications of the SMES technology in electrical power and energy systems. SMES is categorized into three main groups depending on its power conditioning system, namely, the thyristor-based SMES, voltage-source- converter-based SMES, and current-source-converter-based SMES. An extensive bibliography is presented on the applications of these three types of SMES. Also, a comparison is made among these three types of SMES. This study provides a basic guideline to investigate further technological development and new applications of SMES, and thus benefits the readers, researchers, engineers, and academicians who deal with the research works in the area of SMES.

477 citations

Journal ArticleDOI
TL;DR: It is shown that the integrated converter has a reduced number of high-current inductors and current transducers and has provided fault-current tolerance in PHEV conversion.
Abstract: Hybrid electric vehicle (HEV) technology provides an effective solution for achieving higher fuel economy, better performance, and lower emissions, compared with conventional vehicles. Plug-in HEVs (PHEVs) are HEVs with plug-in capabilities and provide a more all-electric range; hence, PHEVs improve fuel economy and reduce emissions even more. PHEVs have a battery pack of high energy density and can run solely on electric power for a given range. The battery pack can be recharged by a neighborhood outlet. In this paper, a novel integrated bidirectional AC/DC charger and DC/DC converter (henceforth, the integrated converter) for PHEVs and hybrid/plug-in-hybrid conversions is proposed. The integrated converter is able to function as an AC/DC battery charger and to transfer electrical energy between the battery pack and the high-voltage bus of the electric traction system. It is shown that the integrated converter has a reduced number of high-current inductors and current transducers and has provided fault-current tolerance in PHEV conversion.

435 citations