Howon Lee

Bio: Howon Lee is an academic researcher from Rutgers University. The author has contributed to research in topics: Materials science & Elastic instability. The author has an hindex of 18, co-authored 51 publications receiving 3251 citations. Previous affiliations of Howon Lee include Lawrence Livermore National Laboratory & University of Illinois at Urbana–Champaign.

Ultralight, ultrastiff mechanical metamaterials

Abstract: The mechanical properties of ordinary materials degrade substantially with reduced density because their structural elements bend under applied load. We report a class of microarchitected materials that maintain a nearly constant stiffness per unit mass density, even at ultralow density. This performance derives from a network of nearly isotropic microscale unit cells with high structural connectivity and nanoscale features, whose structural members are designed to carry loads in tension or compression. Production of these microlattices, with polymers, metals, or ceramics as constituent materials, is made possible by projection microstereolithography (an additive micromanufacturing technique) combined with nanoscale coating and postprocessing. We found that these materials exhibit ultrastiff properties across more than three orders of magnitude in density, regardless of the constituent material.

Multimaterial 4D Printing with Tailorable Shape Memory Polymers

Abstract: We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures. The approach is based on high resolution projection microstereolithography (PμSL) and uses a family of photo-curable methacrylate based copolymer networks. We designed the constituents and compositions to exhibit desired thermomechanical behavior (including rubbery modulus, glass transition temperature and failure strain which is more than 300% and larger than any existing printable materials) to enable controlled shape memory behavior. We used a high resolution, high contrast digital micro display to ensure high resolution of photo-curing methacrylate based SMPs that requires higher exposure energy than more common acrylate based polymers. An automated material exchange process enables the manufacture of 3D composite architectures from multiple photo-curable SMPs. In order to understand the behavior of the 3D composite microarchitectures, we carry out high fidelity computational simulations of their complex nonlinear, time-dependent behavior and study important design considerations including local deformation, shape fixity and free recovery rate. Simulations are in good agreement with experiments for a series of single and multimaterial components and can be used to facilitate the design of SMP 3D structures.

Multimaterial 4D Printing with Tailorable Shape Memory Polymers

Abstract: We present a new 4D printing approach that can create high resolution (up to a few microns), multimaterial shape memory polymer (SMP) architectures The approach is based on high resolution projection microstereolithography (PμSL) and uses a family of photo-curable methacrylate based copolymer networks We designed the constituents and compositions to exhibit desired thermomechanical behavior (including rubbery modulus, glass transition temperature and failure strain which is more than 300% and larger than any existing printable materials) to enable controlled shape memory behavior We used a high resolution, high contrast digital micro display to ensure high resolution of photo-curing methacrylate based SMPs that requires higher exposure energy than more common acrylate based polymers An automated material exchange process enables the manufacture of 3D composite architectures from multiple photo-curable SMPs In order to understand the behavior of the 3D composite microarchitectures, we carry out high fidelity computational simulations of their complex nonlinear, time-dependent behavior and study important design considerations including local deformation, shape fixity and free recovery rate Simulations are in good agreement with experiments for a series of single and multimaterial components and can be used to facilitate the design of SMP 3D structures

Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel

Abstract: Electroactive hydrogels (EAH) that exhibit large deformation in response to an electric field have received great attention as a potential actuating material for soft robots and artificial muscle. However, their application has been limited due to the use of traditional two-dimensional (2D) fabrication methods. Here we present soft robotic manipulation and locomotion with 3D printed EAH microstructures. Through 3D design and precise dimensional control enabled by a digital light processing (DLP) based micro 3D printing technique, complex 3D actuations of EAH are achieved. We demonstrate soft robotic actuations including gripping and transporting an object and a bidirectional locomotion.

Design and optimization of a light-emitting diode projection micro-stereolithography three-dimensional manufacturing system

Abstract: The rapid manufacture of complex three-dimensional micro-scale components has eluded researchers for decades. Several additive manufacturing options have been limited by either speed or the ability to fabricate true three-dimensional structures. Projection micro-stereolithography (PμSL) is a low cost, high throughput additive fabrication technique capable of generating three-dimensional microstructures in a bottom-up, layer by layer fashion. The PμSL system is reliable and capable of manufacturing a variety of highly complex, three-dimensional structures from micro- to meso-scales with micro-scale architecture and submicron precision. Our PμSL system utilizes a reconfigurable digital mask and a 395 nm light-emitting diode (LED) array to polymerize a liquid monomer in a layer-by-layer manufacturing process. This paper discusses the critical process parameters that influence polymerization depth and structure quality. Experimental characterization and performance of the LED-based PμSL system for fabricating highly complex three-dimensional structures for a large range of applications is presented.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Polymers for 3D Printing and Customized Additive Manufacturing

Abstract: Additive manufacturing (AM) alias 3D printing translates computer-aided design (CAD) virtual 3D models into physical objects. By digital slicing of CAD, 3D scan, or tomography data, AM builds objects layer by layer without the need for molds or machining. AM enables decentralized fabrication of customized objects on demand by exploiting digital information storage and retrieval via the Internet. The ongoing transition from rapid prototyping to rapid manufacturing prompts new challenges for mechanical engineers and materials scientists alike. Because polymers are by far the most utilized class of materials for AM, this Review focuses on polymer processing and the development of polymers and advanced polymer systems specifically for AM. AM techniques covered include vat photopolymerization (stereolithography), powder bed fusion (SLS), material and binder jetting (inkjet and aerosol 3D printing), sheet lamination (LOM), extrusion (FDM, 3D dispensing, 3D fiber deposition, and 3D plotting), and 3D bioprinting....

Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication

Abstract: Two-photon excitation provides a means of activating chemical or physical processes with high spatial resolution in three dimensions and has made possible the development of three-dimensional fluorescence imaging, optical data storage, and lithographic microfabrication. These applications take advantage of the fact that the two-photon absorption probability depends quadratically on intensity, so under tight-focusing conditions, the absorption is confined at the focus to a volume of order λ3 (where λ is the laser wavelength). Any subsequent process, such as fluorescence or a photoinduced chemical reaction, is also localized in this small volume. Although three-dimensional data storage and microfabrication have been illustrated using two-photon-initiated polymerization of resins incorporating conventional ultraviolet-absorbing initiators, such photopolymer systems exhibit low photosensitivity as the initiators have small two-photon absorption cross-sections (δ). Consequently, this approach requires high laser power, and its widespread use remains impractical. Here we report on a class of π;-conjugated compounds that exhibit large δ (as high as 1, 250 × 10−50 cm4 s per photon) and enhanced two-photon sensitivity relative to ultraviolet initiators. Two-photon excitable resins based on these new initiators have been developed and used to demonstrate a scheme for three-dimensional data storage which permits fluorescent and refractive read-out, and the fabrication of three-dimensional micro-optical and micromechanical structures, including photonic-bandgap-type structures.

Continuous liquid interface production of 3D objects

Abstract: Additive manufacturing processes such as 3D printing use time-consuming, stepwise layer-by-layer approaches to object fabrication. We demonstrate the continuous generation of monolithic polymeric parts up to tens of centimeters in size with feature resolution below 100 micrometers. Continuous liquid interface production is achieved with an oxygen-permeable window below the ultraviolet image projection plane, which creates a "dead zone" (persistent liquid interface) where photopolymerization is inhibited between the window and the polymerizing part. We delineate critical control parameters and show that complex solid parts can be drawn out of the resin at rates of hundreds of millimeters per hour. These print speeds allow parts to be produced in minutes instead of hours.

Advances in engineering hydrogels

Abstract: BACKGROUND Hydrogels are formed through the cross-linking of hydrophilic polymer chains within an aqueous microenvironment. The gelation can be achieved through a variety of mechanisms, spanning physical entanglement of polymer chains, electrostatic interactions, and covalent chemical cross-linking. The water-rich nature of hydrogels makes them broadly applicable to many areas, including tissue engineering, drug delivery, soft electronics, and actuators. Conventional hydrogels usually possess limited mechanical strength and are prone to permanent breakage. The lack of desired dynamic cues and structural complexity within the hydrogels has further limited their functions. Broadened applications of hydrogels, however, require advanced engineering of parameters such as mechanics and spatiotemporal presentation of active or bioactive moieties, as well as manipulation of multiscale shape, structure, and architecture. ADVANCES Hydrogels with substantially improved physicochemical properties have been enabled by rational design at the molecular level and control over multiscale architecture. For example, formulations that combine permanent polymer networks with reversibly bonding chains for energy dissipation show strong toughness and stretchability. Similar strategies may also substantially enhance the bonding affinity of hydrogels at interfaces with solids by covalently anchoring the polymer networks of tough hydrogels onto solid surfaces. Shear-thinning hydrogels that feature reversible bonds impart a fluidic nature upon application of shear forces and return back to their gel states once the forces are released. Self-healing hydrogels based on nanomaterial hybridization, electrostatic interactions, and slide-ring configurations exhibit excellent abilities in spontaneously healing themselves after damages. Additionally, harnessing techniques that can dynamically and precisely configure hydrogels have resulted in flexibility to regulate their architecture, activity, and functionality. Dynamic modulations of polymer chain physics and chemistry can lead to temporal alteration of hydrogel structures in a programmed manner. Three-dimensional printing enables architectural control of hydrogels at high precision, with a potential to further integrate elements that enable change of hydrogel configurations along prescribed paths. OUTLOOK We envision the continuation of innovation in new bioorthogonal chemistries for making hydrogels, enabling their fabrication in the presence of biological species without impairing cellular or biomolecule functions. We also foresee opportunities in the further development of more sophisticated fabrication methods that allow better-controlled hydrogel architecture across multiple length scales. In addition, technologies that precisely regulate the physicochemical properties of hydrogels in spatiotemporally controlled manners are crucial in controlling their dynamics, such as degradation and dynamic presentation of biomolecules. We believe that the fabrication of hydrogels should be coupled with end applications in a feedback loop in order to achieve optimal designs through iterations. In the end, it is the combination of multiscale constituents and complementary strategies that will enable new applications of this important class of materials.