Author
Hsuan-Wei Lee
Bio: Hsuan-Wei Lee is an academic researcher from National Chung Hsing University. The author has contributed to research in topics: Porphyrin & Dye-sensitized solar cell. The author has an hindex of 8, co-authored 8 publications receiving 10810 citations.
Papers
More filters
••
TL;DR: In this article, a Co(II/III)tris(bipyridyl)-based redox electrolyte was used in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8).
Abstract: The iodide/triiodide redox shuttle has limited the efficiencies accessible in dye-sensitized solar cells. Here, we report mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8). The specific molecular design of YD2-o-C8 greatly retards the rate of interfacial back electron transfer from the conduction band of the nanocrystalline titanium dioxide film to the oxidized cobalt mediator, which enables attainment of strikingly high photovoltages approaching 1 volt. Because the YD2-o-C8 porphyrin harvests sunlight across the visible spectrum, large photocurrents are generated. Cosensitization of YD2-o-C8 with another organic dye further enhances the performance of the device, leading to a measured power conversion efficiency of 12.3% under simulated air mass 1.5 global sunlight.
5,462 citations
•
TL;DR: Mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer are reported, enabling attainment of strikingly high photovoltages approaching 1 volt.
Abstract: Simultaneous modification of the dye and redox shuttle boosts the efficiency of a dye-sensitized solar cell. The iodide/triiodide redox shuttle has limited the efficiencies accessible in dye-sensitized solar cells. Here, we report mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8). The specific molecular design of YD2-o-C8 greatly retards the rate of interfacial back electron transfer from the conduction band of the nanocrystalline titanium dioxide film to the oxidized cobalt mediator, which enables attainment of strikingly high photovoltages approaching 1 volt. Because the YD2-o-C8 porphyrin harvests sunlight across the visible spectrum, large photocurrents are generated. Cosensitization of YD2-o-C8 with another organic dye further enhances the performance of the device, leading to a measured power conversion efficiency of 12.3% under simulated air mass 1.5 global sunlight.
5,385 citations
••
TL;DR: In this paper, an approach for engineering of molecular co-sensitization of TiO2 films in a cocktail solution containing YD2-oC8, an organic dye (CD4) and YDD6 in a specific molar ratio was presented.
Abstract: Co-sensitization of two or more dyes with complementary absorption spectra on a semiconductor film is an effective approach to enhance the performance of a dye-sensitized solar cell (DSSC). Porphyrin sensitizer YD2-oC8 showed outstanding photovoltaic performance co-sensitized with an organic dye to cover the entire visible spectral region, 400–700 nm. To promote the light-harvesting capability beyond 700 nm, a porphyrin dimer (YDD6) was synthesized for a co-sensitized system. We report a systematic approach for engineering of molecular co-sensitization of TiO2 films in a cocktail solution containing YD2-oC8, an organic dye (CD4) and YDD6 in a specific molar ratio to optimize the photovoltaic performance of the device. The resulting device showed panchromatic spectral features in the IPCE action spectrum in the region 400–700 nm attaining efficiencies of 75–80%; the spectrum is extended to the near-IR region attaining 40–45% in 700–800 nm region, giving JSC/mA cm−2 = 19.28, VOC/mV = 753, FF = 0.719, and η = 10.4% under standard AM 1.5 G one-sun irradiation. This performance is superior to what is obtained from the individual single-dye devices and the two-dye co-sensitized systems. The shifts of TiO2 potential upon dye uptake and the kinetics of charge recombination were examined through measurements of the charge extraction (CE) and intensity-modulated photovoltage spectroscopy (IMVS), respectively. Five co-sensitized systems were investigated to demonstrate that suppression of dye aggregation of YDD6 in the co-sensitized film is a key factor to further improve the device performance.
139 citations
••
TL;DR: Three alkoxy-wrapped push-pull porphyrins were designed and synthesized for dye-sensitized solar cell (DSSC) applications and Spectral, electrochemical, photovoltaic and electrochemical impedance spectroscopy properties were well investigated to provide evidence for the molecular design.
104 citations
••
TL;DR: Results indicated that insertion of additional PE unit is beneficial to higher J(SC) by means of improved light-harvesting property due to broadened and red-shifted absorption.
Abstract: A series of zinc porphyrin dyes YD22–YD28 were synthesized and used for dye-sensitized solar cells. Dyes YD26–YD28 consist of zinc porphyrin (ZnP) as core unit, arylamine (Am) as electron-donating group, and p-ethynylbenzoic acid (EBA) as an electron-withdrawing/-anchoring group. The dyes YD22–YD25 contain additional phenylethynylene group (PE) bridged between Am and ZnP units. The influence of the PE unit on molecular properties as well as photovoltaic performances were investigated via photophysical and electrochemical studies and density functional calculations. With the insertion of PE unit, the dyes YD22–YD25 possess better light-harvesting properties in terms of significantly red-shifted Q-band absorption. The conversion efficiencies for dyes YD22–YD25 are better than those of dyes YD26–YD28 owing to larger JSC output. Natural transition orbitals and Mulliken charge analysis were used to analyze the electron injection efficiency for porphyrin dyes upon time-dependent DFT calculations. The results in...
46 citations
Cited by
More filters
••
TL;DR: A low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight is reported.
Abstract: The energy costs associated with separating tightly bound excitons (photoinduced electron-hole pairs) and extracting free charges from highly disordered low-mobility networks represent fundamental losses for many low-cost photovoltaic technologies. We report a low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight. This "meso-superstructured solar cell" exhibits exceptionally few fundamental energy losses; it can generate open-circuit photovoltages of more than 1.1 volts, despite the relatively narrow absorber band gap of 1.55 electron volts. The functionality arises from the use of mesoporous alumina as an inert scaffold that structures the absorber and forces electrons to reside in and be transported through the perovskite.
9,158 citations
••
TL;DR: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency as mentioned in this paper, and many DSC research groups have been established around the world.
Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...
8,707 citations
••
TL;DR: Two studies show, using a variety of time-resolved absorption and emission spectroscopic techniques, that perovskite materials manifest relatively long diffusion paths for charge carriers energized by light absorption, highlighting effective carrier diffusion as a fruitful parameter for further optimization.
Abstract: Low-temperature solution-processed photovoltaics suffer from low efficiencies because of poor exciton or electron-hole diffusion lengths (typically about 10 nanometers). Recent reports of highly efficient CH3NH3PbI3-based solar cells in a broad range of configurations raise a compelling case for understanding the fundamental photophysical mechanisms in these materials. By applying femtosecond transient optical spectroscopy to bilayers that interface this perovskite with either selective-electron or selective-hole extraction materials, we have uncovered concrete evidence of balanced long-range electron-hole diffusion lengths of at least 100 nanometers in solution-processed CH3NH3PbI3. The high photoconversion efficiencies of these systems stem from the comparable optical absorption length and charge-carrier diffusion lengths, transcending the traditional constraints of solution-processed semiconductors.
5,882 citations
••
TL;DR: A bilayer architecture comprising the key features of mesoscopic and planar structures obtained by a fully solution-based process is reported, providing important progress towards the understanding of the role of solution-processing in the realization of low-cost and highly efficient perovskite solar cells.
Abstract: The performance of solar cells based on organic–inorganic perovskites strongly depends on the device architecture and processing conditions. It is now shown that solvent engineering enables the deposition of very dense perovskite layers on mesoporous titania, leading to photovoltaic devices with a high light-conversion efficiency and no hysteresis.
5,684 citations
••
TL;DR: A molecularly engineered porphyrin dye is reported, coded SM315, which features the prototypical structure of a donor-π-bridge-acceptor and both maximizes electrolyte compatibility and improves light-harvesting properties.
Abstract: A dye that both maximizes electrolyte compatibility and improves light-harvesting properties has been designed for dye-sensitized solar cells. In cells based on the cobalt(II)/(III) redox mediator, use of the dye resulted in a power-conversion efficiency of 13%, revealing the great potential of porphyrin dyes for future solar cell applications.
3,940 citations