Huai-Rong Shao

Bio: Huai-Rong Shao is an academic researcher from Samsung. The author has contributed to research in topics: Wireless network & Uncompressed video. The author has an hindex of 31, co-authored 118 publications receiving 3095 citations.

WiFi-based indoor positioning

Abstract: Recently, several indoor localization solutions based on WiFi, Bluetooth, and UWB have been proposed. Due to the limitation and complexity of the indoor environment, the solution to achieve a low-cost and accurate positioning system remains open. This article presents a WiFibased positioning technique that can improve the localization performance from the bottleneck in ToA/AoA. Unlike the traditional approaches, our proposed mechanism relaxes the need for wide signal bandwidth and large numbers of antennas by utilizing the transmission of multiple predefined messages while maintaining high-accuracy performance. The overall system structure is demonstrated by showing localization performance with respect to different numbers of messages used in 20/40 MHz bandwidth WiFi APs. Simulation results show that our WiFi-based positioning approach can achieve 1 m accuracy without any hardware change in commercial WiFi products, which is much better than the conventional solutions from both academia and industry concerning the trade-off of cost and system complexity.

A 60 GHz wireless network for enabling uncompressed video communication

Abstract: Uncompressed high-definition video streaming over wireless personal area networks is a challenging problem because of the high data rate requirement and channel variations. With the advances in RF technology and the huge bandwidth available worldwide in the 57-66 GHz millimeter-wave unlicensed spectrum, mmWave WPANs that can support multigigabit transmission are being developed. However, compared to low-frequency signals (2.4 or 5 GHz), mmWave signals are more fragile; indeed, the propagation losses are significantly higher. In this article we present an mmWave system for supporting uncompressed HD video up to 3 Gb/s. The system includes various efficient error protection and concealment schemes that exploit unequal error resilience properties of uncompressed video. Some of them have been adopted in the emerging 60 GHz WPAN standards such as WirelessHD, ECMA TC48, and IEEE 802.15.3c. Simulations using real uncompressed HD images indicate that the proposed mmWave system can maintain, under poor channel conditions, good average peak-signal-to-noise-ratio and low video quality metric scores.

System and method for discovering and tracking communication directions with asymmetric antenna systems

Abstract: A system and method for discovering and tracking communication directions is disclosed herein. In one embodiment, communication directions for two devices with asymmetric antenna systems are discovered. In one embodiment, a contention access period (CAP) is partitioned into an association CAP and a regular CAP, either of which may be further partitioned into sub-CAPs corresponding to different reception directions. In one embodiment, an association request command is transmitted by a device at different association sub-CAPs to train a transmission direction of the device. In one embodiment, further training is performed to find the best communication directions, as collisions may occur when association request commands are transmitted at different association sub-CAPs.

Method and system for power saving in wireless communications

Abstract: A method and a system for wireless communication is provided which involves maintaining a data communication module in a power saving mode, detecting channel reservation for communication on a wireless data channel during one or more reserved time periods, and upon successful data channel reservation, transitioning the data communication module from the power saving mode to an active mode for data communication on the reserved data channel. Preferably, the data communication module is transitioned back to the power saving mode upon completion of data communication on the data channel.

System and method for antenna training of beamforming vectors by selective use of beam level training

Abstract: A system and method of performing a beam discovery between a device and a plurality of other devices in a wireless network is disclosed. Sector training sequences to a plurality of other devices are transmitted via a transmit directional antenna having a set of transmit sectors. A plurality of feedback messages are received from the plurality of other devices, where the plurality of feedback messages are indicative of optimum transmit sectors that have been determined at the other devices based at least in part on the sector training sequences. Beam training sequences are transmitted to the plurality of other devices via the transmit directional antenna. A plurality of feedback message indicative of optimum transmit beam directions within the optimum transmit sectors are received from the plurality of other devices.

A survey of millimeter wave communications (mmWave) for 5G: opportunities and challenges

Abstract: With the explosive growth of mobile data demand, the fifth generation (5G) mobile network would exploit the enormous amount of spectrum in the millimeter wave (mmWave) bands to greatly increase communication capacity. There are fundamental differences between mmWave communications and existing other communication systems, in terms of high propagation loss, directivity, and sensitivity to blockage. These characteristics of mmWave communications pose several challenges to fully exploit the potential of mmWave communications, including integrated circuits and system design, interference management, spatial reuse, anti-blockage, and dynamics control. To address these challenges, we carry out a survey of existing solutions and standards, and propose design guidelines in architectures and protocols for mmWave communications. We also discuss the potential applications of mmWave communications in the 5G network, including the small cell access, the cellular access, and the wireless backhaul. Finally, we discuss relevant open research issues including the new physical layer technology, software-defined network architecture, measurements of network state information, efficient control mechanisms, and heterogeneous networking, which should be further investigated to facilitate the deployment of mmWave communication systems in the future 5G networks.

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

Abstract: This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

Joint Radar and Communication Design: Applications, State-of-the-Art, and the Road Ahead

Abstract: Sharing of the frequency bands between radar and communication systems has attracted substantial attention, as it can avoid under-utilization of otherwise permanently allocated spectral resources, thus improving efficiency. Further, there is increasing demand for radar and communication systems that share the hardware platform as well as the frequency band, as this not only decongests the spectrum, but also benefits both sensing and signaling operations via the full cooperation between both functionalities. Nevertheless, the success of spectrum and hardware sharing between radar and communication systems critically depends on high-quality joint radar and communication designs. In the first part of this paper, we overview the research progress in the areas of radar-communication coexistence and dual-functional radar-communication (DFRC) systems, with particular emphasis on application scenarios and technical approaches. In the second part, we propose a novel transceiver architecture and frame structure for a DFRC base station (BS) operating in the millimeter wave (mmWave) band, using the hybrid analog-digital (HAD) beamforming technique. We assume that the BS is serving a multi-antenna user equipment (UE) over a mmWave channel, and at the same time it actively detects targets. The targets also play the role of scatterers for the communication signal. In that framework, we propose a novel scheme for joint target search and communication channel estimation, which relies on omni-directional pilot signals generated by the HAD structure. Given a fully-digital communication precoder and a desired radar transmit beampattern, we propose to design the analog and digital precoders under non-convex constant-modulus (CM) and power constraints, such that the BS can formulate narrow beams towards all the targets, while pre-equalizing the impact of the communication channel. Furthermore, we design a HAD receiver that can simultaneously process signals from the UE and echo waves from the targets. By tracking the angular variation of the targets, we show that it is possible to recover the target echoes and mitigate the resulting interference to the UE signals, even when the radar and communication signals share the same signal-to-noise ratio (SNR). The feasibility and efficiency of the proposed approaches in realizing DFRC are verified via numerical simulations. Finally, the paper concludes with an overview of the open problems in the research field of communication and radar spectrum sharing (CRSS).

Beam codebook based beamforming protocol for multi-Gbps millimeter-wave WPAN systems

Abstract: In order to realize high speed, long range, reliable transmission in millimeter-wave 60 GHz wireless personal area networks (60 GHz WPANs), we propose a beamforming (BF) protocol realized in media access control (MAC) layer on top of multiple physical layer (PHY) designs. The proposed BF protocol targets to minimize the BF set-up time and to mitigate the high path loss of 60 GHz WPAN systems. It consists of 3 stages, namely the device (DEV) to DEV linking, sector-level searching and beam-level searching. The division of the stages facilitates significant reduction in setup time as compared to BF protocols with exhaustive searching mechanisms. The proposed BF protocol employs discrete phase-shifters, which significantly simplifies the structure of DEVs as compared to the conventional BF with phase-and-amplitude adjustment, at the expense of a gain degradation of less than 1 dB. The proposed BF protocol is a complete design and PHY-independent, it is applicable to different antenna configurations. Simulation results show that the setup time of the proposed BF protocol is as small as 2% when compared to the exhaustive searching protocol. Furthermore, based on the codebooks with four phases per element, around 15.1 dB gain is achieved by using eight antenna elements at both transmitter and receiver, thereby enabling 1.6 Gbps-data-streaming over a range of three meters. Due to the flexibility in supporting multiple PHY layer designs, the proposed protocol has been adopted by the IEEE 802.15.3c as an optional functionality to realize Gbps communication systems.

Beam Codebook Based Beamforming Protocol for Multi-Gbps Millimeter-Wave WPAN Systems

Abstract: In this paper, we propose a feasible beamforming (BF) scheme realized in media access control (MAC) layer following the guidelines of the IEEE 802.15.3c criteria for millimeter-wave 60GHz wireless personal area networks (60GHz WPANs). The proposed BF targets to minimize the BF set-up time and mitigates the high path loss of 60GHz WPAN systems. It is based on designed multi-resolution codebooks, which generate three kinds of patterns of different half power beam widths (HPBWs): quasi-omni pattern, sector and beam. These three kinds of patterns are employed in the three stages of the BF protocol, namely device-to-device (DEV-to-DEV) linking, sector-level searching and beam-level searching. All the three stages can be completed within one superframe, which minimizes the potential interference to other systems during BF set-up period. In this paper, we show some example codebooks and provide the details of BF procedure. Simulation results show that the setup time of the proposed BF protocol is as small as 2% when compared to the exhaustive searching protocol. The proposed BF is a complete design, it re-uses commands specified in IEEE 802.15.3c, completely compliant to the standard; It has thus been adopted by IEEE 802.15.3c as an optional functionality to realize Giga-bit-per-second (Gbps) communication in WPAN Systems.