scispace - formally typeset
Search or ask a question
Author

Hualiang Zhang

Bio: Hualiang Zhang is an academic researcher from University of Massachusetts Lowell. The author has contributed to research in topics: Microstrip & Band-pass filter. The author has an hindex of 32, co-authored 250 publications receiving 3204 citations. Previous affiliations of Hualiang Zhang include University of North Texas & University of Arizona.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, a large-scale, electrically reconfigurable non-volatile active metasurface platform based on optical phase change materials (PCMs) is presented.
Abstract: Active metasurfaces promise reconfigurable optics with drastically improved compactness, ruggedness, manufacturability and functionality compared to their traditional bulk counterparts. Optical phase-change materials (PCMs) offer an appealing material solution for active metasurface devices with their large index contrast and non-volatile switching characteristics. Here we report a large-scale, electrically reconfigurable non-volatile metasurface platform based on optical PCMs. The optical PCM alloy used in the devices, Ge2Sb2Se4Te (GSST), uniquely combines giant non-volatile index modulation capability, broadband low optical loss and a large reversible switching volume, enabling notably enhanced light–matter interactions within the active optical PCM medium. Capitalizing on these favourable attributes, we demonstrated quasi-continuously tuneable active metasurfaces with record half-octave spectral tuning range and large optical contrast of over 400%. We further prototyped a polarization-insensitive phase-gradient metasurface to realize dynamic optical beam steering. An electrically reconfigurable optical metasurface using a Ge2Sb2Se4Te phase change material shows half an octave spectral tuning and promising performances for optical beam steering applications.

217 citations

Journal ArticleDOI
TL;DR: In this article, a stub tapped branch line coupler for dual-band applications is presented, where a tapped stub is used to realize 90 degrees phase change at two frequencies. But the design equations are derived using the ABCD-matrix and the length of the proposed branch lines are adjusted accordingly compared with the conventional structure.
Abstract: This letter presents a stub tapped branch-line coupler for dual-band applications. In the new design, a tapped stub is used to realize 90deg phase change at two frequencies. Both the characteristic impedance and the length of the proposed branch lines are adjusted accordingly compared with the conventional structure. Explicit design equations are derived using the ABCD-matrix. To verify the design concept, a microstrip coupler operating at 0.9 and 2GHz is fabricated and measured on a Rogers' RO4003 board

193 citations

Journal ArticleDOI
TL;DR: A large-scale, electrically reconfigurable non-volatile metasurface platform based on optical PCMs that shows half an octave spectral tuning and promising performances for optical beam steering applications is reported.
Abstract: Active metasurfaces promise reconfigurable optics with drastically improved compactness, ruggedness, manufacturability, and functionality compared to their traditional bulk counterparts. Optical phase change materials (O-PCMs) offer an appealing material solution for active metasurface devices with their large index contrast and nonvolatile switching characteristics. Here we report what we believe to be the first electrically reconfigurable nonvolatile metasurfaces based on O-PCMs. The O-PCM alloy used in the devices, Ge2Sb2Se4Te1 (GSST), uniquely combines giant non-volatile index modulation capability, broadband low optical loss, and a large reversible switching volume, enabling significantly enhanced light-matter interactions within the active O-PCM medium. Capitalizing on these favorable attributes, we demonstrated continuously tunable active metasurfaces with record half-octave spectral tuning range and large optical contrast of over 400%. We further prototyped a polarization-insensitive phase-gradient metasurface to realize dynamic optical beam steering.

186 citations

Journal ArticleDOI
TL;DR: This research presents a new approach to designing and exploiting metasurfaces for manipulating optical wavefronts in flat and high-performance optical devices through nanofiltration and photolysis.
Abstract: Metasurfaces have become a promising means for manipulating optical wavefronts in flat and high-performance optical devices. Conventional metasurface device design relies on trial-and-error methods...

184 citations

Journal ArticleDOI
TL;DR: In this article, an active metasurface platform combining phase tuning in the full 2π range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs) is presented.
Abstract: Active metasurfaces, whose optical properties can be modulated post-fabrication, have emerged as an intensively explored field in recent years. The efforts to date, however, still face major performance limitations in tuning range, optical quality, and efficiency, especially for non-mechanical actuation mechanisms. In this paper, we introduce an active metasurface platform combining phase tuning in the full 2π range and diffraction-limited performance using an all-dielectric, low-loss architecture based on optical phase change materials (O-PCMs). We present a generic design principle enabling binary switching of metasurfaces between arbitrary phase profiles and propose a new figure-of-merit (FOM) tailored for reconfigurable meta-optics. We implement the approach to realize a high-performance varifocal metalens operating at 5.2 μm wavelength. The reconfigurable metalens features a record large switching contrast ratio of 29.5 dB. We further validate aberration-free and multi-depth imaging using the metalens, which represents a key experimental demonstration of a non-mechanical tunable metalens with diffraction-limited performance. Here, the authors report an active all-dielectric metasurface platform based on phase change materials, combining phase tuning in the full 2π range, and demonstrate aberration-free and multi-depth imaging with a non-mechanical tunable metalens.

156 citations


Cited by
More filters
Proceedings Article
01 Jan 1999
TL;DR: In this paper, the authors describe photonic crystals as the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures, and the interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.
Abstract: The term photonic crystals appears because of the analogy between electron waves in crystals and the light waves in artificial periodic dielectric structures. During the recent years the investigation of one-, two-and three-dimensional periodic structures has attracted a widespread attention of the world optics community because of great potentiality of such structures in advanced applied optical fields. The interest in periodic structures has been stimulated by the fast development of semiconductor technology that now allows the fabrication of artificial structures, whose period is comparable with the wavelength of light in the visible and infrared ranges.

2,722 citations

01 Jan 2016
TL;DR: In this paper, the authors present the principles of optics electromagnetic theory of propagation interference and diffraction of light, which can be used to find a good book with a cup of coffee in the afternoon, instead of facing with some infectious bugs inside their computer.
Abstract: Thank you for reading principles of optics electromagnetic theory of propagation interference and diffraction of light. As you may know, people have search hundreds times for their favorite novels like this principles of optics electromagnetic theory of propagation interference and diffraction of light, but end up in harmful downloads. Rather than enjoying a good book with a cup of coffee in the afternoon, instead they are facing with some infectious bugs inside their computer.

2,213 citations

Journal ArticleDOI
TL;DR: This paper reviews recent advances in biomedical and healthcare applications of Doppler radar that remotely detects heartbeat and respiration of a human subject and reviews different architectures, baseband signal processing, and system implementations.
Abstract: This paper reviews recent advances in biomedical and healthcare applications of Doppler radar that remotely detects heartbeat and respiration of a human subject. In the last decade, new front-end architectures, baseband signal processing methods, and system-level integrations have been proposed by many researchers in this field to improve the detection accuracy and robustness. The advantages of noncontact detection have drawn interests in various applications, such as energy smart home, baby monitor, cardiopulmonary activity assessment, and tumor tracking. While many of the reported systems were bench-top prototypes for concept verification, several portable systems and integrated radar chips have been demonstrated. This paper reviews different architectures, baseband signal processing, and system implementations. Validations of this technology in a clinical environment will also be discussed.

625 citations

Journal ArticleDOI
TL;DR: In this article, the authors introduce the theory of microwave absorption and summarize recent advances in the fabrication of graphene-based MAMs, including rational design of the microstructure of pure graphene and tunable chemical integrations with polymers, magnetic metals, ferrites, ceramics, and multicomponents composites.
Abstract: With the rapid arising of information technology, microwave absorbing materials (MAMs) are playing an increasingly significant role in electronic reliability, healthcare, and national defense security. Hence, development of high performance MAMs with thin thickness, low density, wide bandwidth, and strong absorption has attracted great interests. Recently, taking graphene as MAMs for high-performance electromagnetic (EM) wave attenuation has grabbed considerable attention, owing to their low density, high specific surface area, strong dielectric loss, and high electronic conductivity. Furthermore, in order to address the interfacial impedance mismatching of the sole graphene materials, incorporation of other lossy materials has been widely studied as the imperative solution to improve its MA performance. In this review, we introduce the theory of microwave absorption and summarize recent advances in the fabrication of graphene-based MAMs, including rational design of the microstructure of pure graphene and tunable chemical integrations with polymers, magnetic metals, ferrites, ceramics, and multicomponents composites. The key point of enhancing MA in graphene-based MAMs is to regulate their EM properties, improve of impedance matching, and create diversified loss mechanisms. Furthermore, the shortcomings, challenges, and prospects of graphene-based MAMs are also put forward, which will be helpful to people working in the related fields.

535 citations

Journal ArticleDOI
TL;DR: In this article, the authors used ICP and conductive fillers incorporated in conductive polymer-based composites (CPC) to facilitate the research in electromagnetic interference (EMI) s...
Abstract: Intrinsically conducting polymers (ICP) and conductive fillers incorporated conductive polymer-based composites (CPC) greatly facilitate the research in electromagnetic interference (EMI) s...

457 citations