Hui Feng Ma

Bio: Hui Feng Ma is an academic researcher from Southeast University. The author has contributed to research in topics: Metamaterial & Polarization (waves). The author has an hindex of 39, co-authored 149 publications receiving 6962 citations.

Polarization-independent wide-angle triple-band metamaterial absorber.

Abstract: We report the design, fabrication, and measurement of a microwave triple-band absorber. The compact single unit cell consists of three nested electric closed-ring resonators and a metallic ground plane separated by a dielectric layer. Simulation and experimental results show that the absorber has three distinctive absorption peaks at frequencies 4.06GHz, 6.73GHz, and 9.22GHz with the absorption rates of 0.99, 0.93, and 0.95, respectively. The absorber is valid to a wide range of incident angles for both transverse electric (TE) and transverse magnetic (TM) polarizations. The triple-band absorber is a promising candidate as absorbing elements in scientific and technical applications because of its multiband absorption, polarization insensitivity, and wide-angle response.

Broadband and high-efficiency conversion from guided waves to spoof surface plasmon polaritons

Abstract: The conversion from spatial propagating waves to surface plasmon polaritons (SPPs) has been well studied, and shown to be very efficient by using gradient-index metasurfaces. However, feeding energies into and extracting signals from functional plasmonic devices or circuits through transmission lines require the efficient conversion between SPPs and guided waves, which has not been reported, to the best of our knowledge. In this paper, a smooth bridge between the conventional coplanar waveguide (CPW) with 50 Ω impedance and plasmonic waveguide (e.g., an ultrathin corrugated metallic strip) has been proposed in the microwave frequency, which converts the guided waves to spoof SPPs with high efficiency in broadband. A matching transition has been proposed and designed, which is constructed by gradient corrugations and flaring ground, to match both the momentum and impedance of CPW and the plasmonic waveguide. Simulated and measured results on the transmission coefficients and near-filed distributions show excellent transmission efficiency from CPW to a plasmonic waveguide to CPW in a wide frequency band. The high-efficiency and broadband conversion between SPPs and guided waves opens up a new avenue for advanced conventional plasmonic integrated functional devices and circuits.

Three-dimensional broadband ground-plane cloak made of metamaterials

Abstract: Optical cloaking has already been demonstrated in two dimensions, and also in three dimensions for a limited range of angles. Now, Ma and Cui present a metamaterial-based cloaking device that can shield an object lying on the ground plane from all viewing angles at microwave frequencies.

Ultrawideband and High-Efficiency Linear Polarization Converter Based on Double V-Shaped Metasurface

Abstract: In this paper, a double V-shaped metasurface that can efficiently convert linear polarizations of electromagnetic (EM) waves in wideband is proposed. Based on the electric and magnetic resonant features of a single V-shaped particle, four EM resonances are generated in a V-shaped pair, leading to significant bandwidth expansion of cross-polarized reflections. The simulation results show that the proposed metasurface is able to convert linearly polarized waves into cross-polarized waves in ultrawideband from 12.4 to 27.96 GHz, with an average polarization conversion ratio (PCR) of 90%. The experimental results are in good agreement with the numerical simulations. Compared to published designs, the proposed polarization converter has a simple geometry but an ultrawideband and hence can be used in many applications, such as reflector antennas, imaging systems, remote sensors, and radiometers. The method can also be extended to the terahertz band.

Broadband diffusion of terahertz waves by multi-bit coding metasurfaces

Abstract: The terahertz region is a special region of the electromagnetic spectrum that incorporates the advantages of both microwaves and infrared light waves. In the past decade, metamaterials with effective medium parameters or gradient phases have been studied to control terahertz waves and realize functional devices. Here, we present a new approach to manipulate terahertz waves by using coding metasurfaces that are composed of digital coding elements. We propose a general coding unit based on a Minkowski closed-loop particle that is capable of generating 1-bit coding (with two phase states of 0 and 180°), 2-bit coding (with four phase states of 0, 90°, 180°, and 270°), and multi-bit coding elements in the terahertz frequencies by using different geometric scales. We show that multi-bit coding metasurfaces have strong abilities to control terahertz waves by designing-specific coding sequences. As an application, we demonstrate a new scattering strategy of terahertz waves—broadband and wide-angle diffusion—using a 2-bit coding metasurface with a special coding design and verify it by both numerical simulations and experiments. The presented method opens a new route to reducing the scattering of terahertz waves. A team in China has demonstrated a new strategy for controlling terahertz waves by using ‘coding’ metasurfaces to attain broadband diffusion. Metamaterials have previously been used to control terahertz waves and develop functional devices. Now, Tie Jun Cui and co-workers have developed metasurfaces composed of one-, two- and three-bit digital coding elements based on Minkowski loops. They demonstrated their coding surfaces by showing that metasurfaces with appropriately designed coding sequences can be used to strongly manipulate terahertz waves. In particular, they realized broadband, wide-angle diffusion using a two-bit coding metasurface with a special design and obtained good agreement between the measured results and numerical simulations. The proposed method offers a new way to control scattering of terahertz waves and can be implemented using conventional lithography.

Coding metamaterials, digital metamaterials and programmable metamaterials

Abstract: Smart materials offering great freedom in manipulating electromagnetic radiation have been developed. This exciting new concept was realized by Tie Jun Cui and co-workers at the Southeast University, China, who developed digital metamaterials consisting of two kinds of unit cells whose different phase responses allow them to act as ‘0’ and ‘1’ bits. These cells can be judiciously arranged in sequences to enable controlled manipulation of electromagnetic waves. This is one-bit coding; higher-bit coding is possible by employing more kinds of unit cells. The researchers developed a metamaterial cell whose binary response can be controlled by a biased diode. By using a field-programmable gate array, they demonstrated that this digital metamaterial can be programmed. Such metamaterials are attractive for controlling radiation beams in antennas and for realizing other ‘smart’ metamaterials.

Gradient-index meta-surfaces as a bridge linking propagating waves and surface waves

Abstract: The arbitrary control of electromagnetic waves is a key aim of photonic research. Although, for example, the control of freely propagating waves (PWs) and surface waves (SWs) has separately become possible using transformation optics and metamaterials, a bridge linking both propagation types has not yet been found. Such a device has particular relevance given the many schemes of controlling electromagnetic waves at surfaces and interfaces, leading to trapped rainbows, lensing, beam bending, deflection, and even anomalous reflection/refraction. Here, we demonstrate theoretically and experimentally that a specific gradient-index meta-surface can convert a PW to a SW with nearly 100% efficiency. Distinct from conventional devices such as prism or grating couplers, the momentum mismatch between PW and SW is compensated by the reflection-phase gradient of the meta-surface, and a nearly perfect PW-SW conversion can happen for any incidence angle larger than a critical value. Experiments in the microwave region, including both far-field and near-field characterizations, are in excellent agreement with full-wave simulations. Our findings may pave the way for many applications, including high-efficiency surface plasmon couplers, anti-reflection surfaces, light absorbers, and so on.

Coding Metamaterials, Digital Metamaterials and Programming Metamaterials

Abstract: As artificial structures, metamaterials are usually described by macroscopic effective medium parameters, which are named as "analog metamaterials". Here, we propose "digital metamaterials" in two steps. Firstly, we present "coding metamaterials" that are composed of only two kinds of unit cells with 0 and {\pi} phase responses, which we name as "0" and "1" elements. By coding "0" and "1" elements with controlled sequences (i.e., 1-bit coding), we can manipulate electromagnetic (EM) waves and realize different functionalities. The concept of coding metamaterial can be extended from 1-bit coding to 2-bit or more. In 2-bit coding, four kinds of unit cells with phase responses 0, {\pi}/2, {\pi}, and 3{\pi}/2 are required to mimic "00", "01", "10" and "11" elements, which have larger freedom to control EM waves. Secondly, we propose a unique metamaterial particle which has either "0" or "1" response controlled by a biased diode. Based on the particle, we present "digital metamaterials" with unit cells having either "0" or "1" state. Using the field-programmable gate array, we realize to control the digital metamaterial digitally. By programming different coding sequences, a single digital metamaterial has distinct abilities in manipulating EM waves, realizing the "programming metamaterials". The above concepts and physical phenomena are confirmed by numerical simulations and experiments through metasurfaces.

A review of metasurfaces: physics and applications.

Abstract: Metamaterials are composed of periodic subwavelength metal/dielectric structures that resonantly couple to the electric and/or magnetic components of the incident electromagnetic fields, exhibiting properties that are not found in nature. This class of micro- and nano-structured artificial media have attracted great interest during the past 15 years and yielded ground-breaking electromagnetic and photonic phenomena. However, the high losses and strong dispersion associated with the resonant responses and the use of metallic structures, as well as the difficulty in fabricating the micro- and nanoscale 3D structures, have hindered practical applications of metamaterials. Planar metamaterials with subwavelength thickness, or metasurfaces, consisting of single-layer or few-layer stacks of planar structures, can be readily fabricated using lithography and nanoprinting methods, and the ultrathin thickness in the wave propagation direction can greatly suppress the undesirable losses. Metasurfaces enable a spatially varying optical response (e.g. scattering amplitude, phase, and polarization), mold optical wavefronts into shapes that can be designed at will, and facilitate the integration of functional materials to accomplish active control and greatly enhanced nonlinear response. This paper reviews recent progress in the physics of metasurfaces operating at wavelengths ranging from microwave to visible. We provide an overview of key metasurface concepts such as anomalous reflection and refraction, and introduce metasurfaces based on the Pancharatnam-Berry phase and Huygens' metasurfaces, as well as their use in wavefront shaping and beam forming applications, followed by a discussion of polarization conversion in few-layer metasurfaces and their related properties. An overview of dielectric metasurfaces reveals their ability to realize unique functionalities coupled with Mie resonances and their low ohmic losses. We also describe metasurfaces for wave guidance and radiation control, as well as active and nonlinear metasurfaces. Finally, we conclude by providing our opinions of opportunities and challenges in this rapidly developing research field.

Metamaterial Electromagnetic Wave Absorbers

Abstract: The advent of negative index materials has spawned extensive research into metamaterials over the past decade. Metamaterials are attractive not only for their exotic electromagnetic properties, but also their promise for applications. A particular branch–the metamaterial perfect absorber (MPA)–has garnered interest due to the fact that it can achieve unity absorptivity of electromagnetic waves. Since its first experimental demonstration in 2008, the MPA has progressed significantly with designs shown across the electromagnetic spectrum, from microwave to optical. In this Progress Report we give an overview of the field and discuss a selection of examples and related applications. The ability of the MPA to exhibit extreme performance flexibility will be discussed and the theory underlying their operation and limitations will be established. Insight is given into what we can expect from this rapidly expanding field and future challenges will be addressed.