Hwanchol Jang

Bio: Hwanchol Jang is an academic researcher from Gwangju Institute of Science and Technology. The author has contributed to research in topics: Decoding methods & Search tree. The author has an hindex of 5, co-authored 13 publications receiving 92 citations.

COMPU-EYE: a high resolution computational compound eye

Abstract: In nature, the compound eyes of arthropods have evolved towards a wide field of view (FOV), infinite depth of field and fast motion detection. However, compound eyes have inferior resolution when compared with the camera-type eyes of vertebrates, owing to inherent structural constraints such as the optical performance and the number of ommatidia. For resolution improvements, in this paper, we propose COMPUtational compound EYE (COMPU-EYE), a new design that increases acceptance angles and uses a modern digital signal processing (DSP) technique. We demonstrate that the proposed COMPU-EYE provides at least a four-fold improvement in resolution.

A novel method for controlled synthesis of nanosized hematite (α-Fe 2 O 3 ) thin film on liquid–vapor interface

Abstract: Hematite (α-Fe2O3) films with a high quality surface morphology have been formed at the liquid–vapor interface using a novel approach. The surface morphology/size of the nanoparticles constituting the film is tuned in a controlled manner. It is observed that the concentration of polyvinyl alcohol in the precursor Fe3+/Fe2+ solution, the concentration of ammonia (NH3) vapor, and the annealing temperature are factors influencing the surface morphology/size of nanoparticles. The diameter of the α-Fe2O3 nanoparticles inside the film is controlled to be 2–15 nm by varying the synthesis conditions, and accordingly the films have roughness in the 1.34–6.8 nm range. The prepared α-Fe2O3 films are crystalline in nature and exhibit superparamagnetic behavior at room temperature.

Speckle suppression via sparse representation for wide-field imaging through turbid media

Abstract: Speckle suppression is one of the most important tasks in the image transmission through turbid media. Insufficient speckle suppression requires an additional procedure such as temporal ensemble averaging over multiple exposures. In this paper, we consider the image recovery process based on the so-called transmission matrix (TM) of turbid media for the image transmission through the media. We show that the speckle left unremoved in the TM-based image recovery can be suppressed effectively via sparse representation (SR). SR is a relatively new signal reconstruction framework which works well even for ill-conditioned problems. This is the first study to show the benefit of using the SR as compared to the phase conjugation (PC) a de facto standard method to date for TM-based imaging through turbid media including a live cell through tissue slice.

Holistic random encoding for imaging through multimode fibers.

Abstract: The input numerical aperture (NA) of multimode fiber (MMF) can be effectively increased by placing turbid media at the input end of the MMF. This provides the potential for high-resolution imaging through the MMF. While the input NA is increased, the number of propagation modes in the MMF and hence the output NA remains the same. This makes the image reconstruction process underdetermined and may limit the quality of the image reconstruction. In this paper, we aim to improve the signal to noise ratio (SNR) of the image reconstruction in imaging through MMF. We notice that turbid media placed in the input of the MMF transforms the incoming waves into a better format for information transmission and information extraction. We call this transformation as holistic random (HR) encoding of turbid media. By exploiting the HR encoding, we make a considerable improvement on the SNR of the image reconstruction. For efficient utilization of the HR encoding, we employ sparse representation (SR), a relatively new signal reconstruction framework when it is provided with a HR encoded signal. This study shows for the first time to our knowledge the benefit of utilizing the HR encoding of turbid media for recovery in the optically underdetermined systems where the output NA of it is smaller than the input NA for imaging through MMF.

Enhancing the numerical aperture of lenses using ZnO nanostructure-based turbid media

Abstract: Nanosheets, nanoparticles, and microstructures of ZnO were synthesized via a wet chemical method. ZnO films with a thickness of 44?46??m were fabricated by spray coating, and these have been investigated for their potential use in turbid lens applications. A morphology-dependent comparative study of the transmittance of ZnO turbid films was conducted. Furthermore, these ZnO turbid films were used to enhance the numerical aperture (NA) of a Nikon objective lens. The variation in NA with different morphologies was explained using size-dependent scattering by the fabricated films. A maximum NA of around 1.971 of the objective lens with a turbid film of ZnO nanosheets was achieved.

Magnetic polymer nanocomposites for environmental and biomedical applications

Abstract: Hybrid nanomaterials have received voluminous interest due to the combination of unique properties of organic and inorganic component in one material. In this class, magnetic polymer nanocomposites are of particular interest because of the combination of excellent magnetic properties, stability, and good biocompatibility. Organic–inorganic magnetic nanocomposites can be prepared by in situ, ex situ, microwave reflux, co-precipitation, melt blending, and ceramic–glass processing and plasma polymerization techniques. These nanocomposites have been exploited for in vivo imaging, as superparamagnetic or negative contrast agents, drug carriers, heavy metal adsorbents, and magnetically recoverable photocatalysts for degradation of organic pollutants. This review article is mainly focused on fabrication of magnetic polymer nanocomposites and their applications. Different types of magnetic nanoparticles, methods of their synthesis, properties, and applications have also been reviewed briefly. The review also provides detailed insight into various types of magnetic nanocomposites and their synthesis. Diverse applications of magnetic nanocomposites including environmental and biomedical uses have been discussed.

Tailoring light with a digital micromirror device

Abstract: A digital micromirror device (DMD) is a product of micromechanics. The DMD employs numerous micromirrors as the actuating components to switch small portions of light on and off. During the past few decades, such devices have been widely applied in digital light processing technology. The expanding range of applications makes the DMD increasingly important in various research aspects. Recent advances demonstrate that the DMD is potentially better than the traditional liquid crystal spatial light modulator in speed, spectrum sensitivity, and polarization modulation. These characteristics have been verified in a series of recently reported experiments. This review summarizes the related theory, experimental techniques, and applications for wavefront shaping with DMDs in both statically shaping various spatial modes and dynamically compensating for wavefront distortion caused by the scattering medium.

Bioinspired Artificial Eyes: Optic Components, Digital Cameras, and Visual Prostheses

Abstract: The diverse vision systems found in nature can provide interesting design inspiration for imaging devices, ranging from optical subcomponents to digital cameras and visual prostheses, with more desirable optical characteristics compared to conventional imagers. The advantages of natural vision systems include high visual acuity, wide field of view, wavelength-free imaging, improved aberration correction and depth of field, and high motion sensitivity. Recent advances in soft materials, ultrathin electronics, and deformable optoelectronics have facilitated the realization of novel processes and device designs that mimic biological vision systems. This review highlights recent progress and continued efforts in the research and development of bioinspired artificial eyes. At first, the configuration of two representative eyes found in nature: a single-chambered eye and a compound eye, is explained. Then, advances in bioinspired optic components and image sensors are discussed in terms of materials, optical/mechanical designs, and integration schemes. Subsequently, novel visual prostheses as representative application examples of bioinspired artificial eyes are described.

Review of state-of-the-art artificial compound eye imaging systems.

Abstract: The natural compound eye has received much attention in recent years due to its remarkable properties, such as its large field of view (FOV), compact structure, and high sensitivity to moving objects. Many studies have been devoted to mimicking the imaging system of the natural compound eye. The paper gives a review of state-of-the-art artificial compound eye imaging systems. Firstly, we introduce the imaging principle of three types of natural compound eye. Then, we divide current artificial compound eye imaging systems into four categories according to the difference of structural composition. Readers can easily grasp methods to build an artificial compound eye imaging system from the perspective of structural composition. Moreover, we compare the imaging performance of state-of-the-art artificial compound eye imaging systems, which provides a reference for readers to design system parameters of an artificial compound eye imaging system. Next, we present the applications of the artificial compound eye imaging system including imaging with a large FOV, imaging with high resolution, object distance detection, medical imaging, egomotion estimation, and navigation. Finally, an outlook of the artificial compound eye imaging system is highlighted.

Artificial compound eye: a survey of the state-of-the-art

Abstract: An artificial compound eye system is the bionic system of natural compound eyes with much wider field-of-view, better capacity to detect moving objects and higher sensitivity to light intensity than ordinary single-aperture eyes. In recent years, renewed attention has been paid to the artificial compound eyes, due to their better characteristics inheriting from insect compound eyes than ordinary optical imaging systems. This paper provides a comprehensive survey of the state-of-the-art work on artificial compound eyes. This review starts from natural compound eyes to artificial compound eyes including their system design, theoretical development and applications. The survey of artificial compound eyes is developed in terms of two main types: planar and curved artificial compound eyes. Finally, the most promising future research developments are highlighted.