Hyo Joong Kim

Bio: Hyo Joong Kim is an academic researcher from Korea University. The author has contributed to research in topics: Non-blocking I/O & Nanorod. The author has an hindex of 17, co-authored 22 publications receiving 2475 citations. Previous affiliations of Hyo Joong Kim include Kyung Hee University.

Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview

Abstract: High-performance gas sensors prepared using p-type oxide semiconductors such as NiO, CuO, Cr2O3, Co3O4, and Mn3O4 were reviewed. The ionized adsorption of oxygen on p-type oxide semiconductors leads to the formation of hole-accumulation layers (HALs), and conduction occurs mainly along the near-surface HAL. Thus, the chemoresistive variations of undoped p-type oxide semiconductors are lower than those induced at the electron-depletion layers of n-type oxide semiconductors. However, highly sensitive and selective p-type oxide-semiconductor-based gas sensors can be designed either by controlling the carrier concentration through aliovalent doping or by promoting the sensing reaction of a specific gas through doping/loading the sensor material with oxide or noble metal catalysts. The junction between p- and n-type oxide semiconductors fabricated with different contact configurations can provide new strategies for designing gas sensors. p-Type oxide semiconductors with distinctive surface reactivity and oxygen adsorption are also advantageous for enhancing gas selectivity, decreasing the humidity dependence of sensor signals to negligible levels, and improving recovery speed. Accordingly, p-type oxide semiconductors are excellent materials not only for fabricating highly sensitive and selective gas sensors but also valuable additives that provide new functionality in gas sensors, which will enable the development of high-performance gas sensors.

Ultraselective and sensitive detection of xylene and toluene for monitoring indoor air pollution using Cr-doped NiO hierarchical nanostructures

Abstract: Ultraselective and sensitive detection of xylene and toluene with minimum interferences of other indoor air pollutants such as benzene, ethanol, and formaldehyde is achieved using NiO hierarchical nanostructures doped with Cr. Pure and 1.15–2.56 at% Cr-doped NiO flower-like hierarchical nanostructures assembled from nanosheets are prepared by a simple solvothermal reaction and their gas sensing characteristics toward o-xylene and toluene gases are investigated. The 1.15 at% Cr-doped NiO hierarchical nanostructures show high responses to 5 ppm of o-xylene and toluene (ratio of resistance to gas and air = 11.61 and 7.81, respectively) and negligible cross-responses to 5 ppm of benzene, formaldehyde, ethanol, hydrogen, and carbon monoxide. However, pure NiO nanostructures show low responses to 5 ppm of o-xylene and toluene (ratio of resistance to gas and air = 2.01 and 1.14, respectively) and no selectivity toward any specific gas is observed. Significant enhancement of the response and selectivity to o-xylene and toluene is attributed to the decrease in the hole concentration in NiO and the catalytic oxidation of methyl groups by Cr doping.

Ultraselective and ultrasensitive detection of H2S in highly humid atmosphere using CuO-loaded SnO2 hollow spheres for real-time diagnosis of halitosis

Abstract: The CuO-loaded SnO2 hollow spheres were prepared by ultrasonic spray pyrolysis and their H2S sensing characteristics in dry and humid atmospheres for the diagnosis of halitosis were investigated. The loading of CuO to SnO2 hollow spheres decreased the humidity dependence of H2S sensing characteristics down to negligible level, increased the gas response (ratio of resistance to air and gas) in highly humid atmosphere (relative humidity 80%) to 1 ppm H2S from 3.13 to 22.4, and enhanced the selectivity to H2S over CO, NH3, CH3COCH3, C6H6, CH3C6H5, (CH3)2C6H4, and NO at 300 °C. Ultraselective and ultrasensitive detection of H2S under highly humid atmosphere with negligible interferences from other biomarker gases provides a promising and reliable analysis tool for real-time diagnosis of halitosis from exhaled breath.

Enhanced Ethanol Sensing Characteristics of In2O3-Decorated NiO Hollow Nanostructures via Modulation of Hole Accumulation Layers

Abstract: In this work, we report a dramatic enhancement in ethanol sensing characteristics of NiO hollow nanostructures via decoration with In2O3 nanoclusters. The pure NiO and 1.64-4.41 atom % In-doped NiO and In2O3-decorated NiO hollow spheres were prepared by ultrasonic spray pyrolysis, and their gas sensing characteristics were investigated. The response (the ratio between the resistance in gas and air) of the In2O3-decorated NiO hollow spheres to 5 ppm ethanol (C2H5OH) was 9.76 at 350 °C, which represents a significant improvement over the In-doped NiO and pure NiO hollow spheres (3.37 and 2.18, respectively). Furthermore, the 90% recovery time was drastically reduced from 1880 to 23 s, and a selective detection of ethanol with negligible cross-response to other gases was achieved. The enhanced gas response and fast recovery kinetics were explained in relation to the thinning of the near-surface hole accumulation layer of p-type NiO underneath n-type In2O3, the change of charge carrier concentration, and the variation of oxygen adsorption.

Template-free solvothermal synthesis of hollow hematite spheres and their applications in gas sensors and Li-ion batteries

Abstract: Magnetite (Fe3O4) hollow spheres were prepared by solvothermal reaction of ethanol solution containing Fe-acetate and L-lysine, and were subsequently transformed into hematite (Fe2O3) hollow spheres with nanoscale (20–30 nm) thin shells by heat treatment at 500 °C for 2 h. Both the as-prepared and heat-treated hollow spheres contained another small sphere within each shell, which was attributed to the following solvothermal self-assembly reactions: (1) the nucleation of Fe3O4 spheres, (2) lysine capping on the nuclei, (3) the growth of lysine-capped particles by cross-linking between lysine molecules, and (4) the formation of Fe shell layers by the interaction between Fe ions and outer lysine molecules. In the assembly reaction, L-lysine with amino and carboxyl radicals played the key role. The heat-treated Fe2O3 hollow spheres showed significantly enhanced C2H5OH sensing characteristics and promising Li-ion intercalation behaviors.

Handbook of Chemistry and Physics

Abstract: There is a special reason for reviewing this book at this time: it is the 50th edition of a compendium that is known and used frequently in most chemical and physical laboratories in many parts of the world. Surely, a publication that has been published for 56 years, withstanding the vagaries of science in this century, must have had something to offer. There is another reason: while the book is a standard fixture in most chemical and physical laboratories, including those in medical centers, it is not as frequently seen in the laboratories of physician's offices (those either in solo or group practice). I believe that the Handbook can be useful in those laboratories. One of the reasons, among others, is that the various basic items of information it offers may be helpful in new tests, either physical or chemical, which are continuously being published. The basic information may relate

Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview

Abstract: High-performance gas sensors prepared using p-type oxide semiconductors such as NiO, CuO, Cr2O3, Co3O4, and Mn3O4 were reviewed. The ionized adsorption of oxygen on p-type oxide semiconductors leads to the formation of hole-accumulation layers (HALs), and conduction occurs mainly along the near-surface HAL. Thus, the chemoresistive variations of undoped p-type oxide semiconductors are lower than those induced at the electron-depletion layers of n-type oxide semiconductors. However, highly sensitive and selective p-type oxide-semiconductor-based gas sensors can be designed either by controlling the carrier concentration through aliovalent doping or by promoting the sensing reaction of a specific gas through doping/loading the sensor material with oxide or noble metal catalysts. The junction between p- and n-type oxide semiconductors fabricated with different contact configurations can provide new strategies for designing gas sensors. p-Type oxide semiconductors with distinctive surface reactivity and oxygen adsorption are also advantageous for enhancing gas selectivity, decreasing the humidity dependence of sensor signals to negligible levels, and improving recovery speed. Accordingly, p-type oxide semiconductors are excellent materials not only for fabricating highly sensitive and selective gas sensors but also valuable additives that provide new functionality in gas sensors, which will enable the development of high-performance gas sensors.

Nanoscale metal oxide-based heterojunctions for gas sensing: A review

Abstract: Metal oxide-based resistive-type gas sensors are solid-state devices which are widely used in a number of applications from health and safety to energy efficiency and emission control. Nanomaterials such as nanowires, nanorods, and nanoparticles have dominated the research focus in this field due to their large number of surface sites facilitating surface reactions. Previous studies have shown that incorporating two or more metal oxides to form a heterojunction interface can have drastic effects on gas sensor performance, especially the selectivity. Recently, these effects have been amplified by designing heterojunctions on the nano-scale. These designs have evolved from mixed commercial powders and bi-layer films to finely-tuned core–shell and hierarchical brush-like nanocomposites. This review details the various morphological classes currently available for nanostructured metal-oxide based heterojunctions and then presents the dominant electronic and chemical mechanisms that influence the performance of these materials as resistive-type gas sensors. Mechanisms explored include p–n and n–n potential barrier manipulation, n–p–n response type inversions, spill-over effects, synergistic catalytic behavior, and microstructure enhancement. Tables are presented summarizing these works specifically for SnO2, ZnO, TiO2, In2O3, Fe2O3, MoO3, Co3O4, and CdO-based nanocomposites. Recent developments are highlighted and likely future trends are explored.

Nanostructured Materials for Room-Temperature Gas Sensors

Abstract: Sensor technology has an important effect on many aspects in our society, and has gained much progress, propelled by the development of nanoscience and nanotechnology. Current research efforts are directed toward developing high-performance gas sensors with low operating temperature at low fabrication costs. A gas sensor working at room temperature is very appealing as it provides very low power consumption and does not require a heater for high-temperature operation, and hence simplifies the fabrication of sensor devices and reduces the operating cost. Nanostructured materials are at the core of the development of any room-temperature sensing platform. The most important advances with regard to fundamental research, sensing mechanisms, and application of nanostructured materials for room-temperature conductometric sensor devices are reviewed here. Particular emphasis is given to the relation between the nanostructure and sensor properties in an attempt to address structure-property correlations. Finally, some future research perspectives and new challenges that the field of room-temperature sensors will have to address are also discussed.