The flight of insects has fascinated physicists and biologists for more than a century. Yet, until recently, researchers were unable to rigorously quantify the complex wing motions of flapping insects or measure the forces and flows around their wings. However, recent developments in high-speed videography and tools for computational and mechanical modeling have allowed researchers to make rapid progress in advancing our understanding of insect flight. These mechanical and computational fluid dynamic models, combined with modern flow visualization techniques, have revealed that the fluid dynamic phenomena underlying flapping flight are different from those of non-flapping, 2-D wings on which most previous models were based. In particular, even at high angles of attack, a prominent leading edge vortex remains stably attached on the insect wing and does not shed into an unsteady wake, as would be expected from non-flapping 2-D wings. Its presence greatly enhances the forces generated by the wing, thus enabling insects to hover or maneuver. In addition, flight forces are further enhanced by other mechanisms acting during changes in angle of attack, especially at stroke reversal, the mutual interaction of the two wings at dorsal stroke reversal or wing-wake interactions following stroke reversal. This progress has enabled the development of simple analytical and empirical models that allow us to calculate the instantaneous forces on flapping insect wings more accurately than was previously possible. It also promises to foster new and exciting multi-disciplinary collaborations between physicists who seek to explain the phenomenology, biologists who seek to understand its relevance to insect physiology and evolution, and engineers who are inspired to build micro-robotic insects using these principles. This review covers the basic physical principles underlying flapping flight in insects, results of recent experiments concerning the aerodynamics of insect flight, as well as the different approaches used to model these phenomena.

/pdf/the-aerodynamics-of-insect-flight-4ladwfpmp7.pdf

The aerodynamics of insect flight

The vortical flow patterns in the wake of a NACA 0012 airfoil pitching at small amplitudes are studied in a low speed water channel. it is shown that a great deal of control can be exercised on the structure of the wake by the control of the frequency, amplitude and also the shape of the oscillation waveform. An important observation in this study has been the existence of an axial flow along the cores of the wake vortices. Estimates of the magnitude of the axial flow suggest a linear dependence on the oscillation frequency and amplitude.

/pdf/vortical-patterns-in-the-wake-of-an-oscillating-airfoil-3jxa996ebg.pdf

Vortical patterns in the wake of an oscillating airfoil

▪ Abstract In this review we describe the aerodynamic problems that must be addressed in order to design a successful small aerial vehicle. The effects of Reynolds number and aspect ratio (AR) on the design and performance of fixed-wing vehicles are described. The boundary-layer behavior on airfoils is especially important in the design of vehicles in this flight regime. The results of a number of experimental boundary-layer studies, including the influence of laminar separation bubbles, are discussed. Several examples of small unmanned aerial vehicles (UAVs) in this regime are described. Also, a brief survey of analytical models for oscillating and flapping-wing propulsion is presented. These range from the earliest examples where quasi-steady, attached flow is assumed, to those that account for the unsteady shed vortex wake as well as flow separation and aeroelastic behavior of a flapping wing. Experiments that complemented the analysis and led to the design of a successful ornithopter are also described.

Aerodynamics of small vehicles

It is the objective of this paper to review recent developments in the understanding and prediction of flapping-wing aerodynamics. To this end, several flapping-wing configurations are considered. First, the problem of single flapping wings is treated with special emphasis on the dependence of thrust, lift, and propulsive efficiency on flapping mode, amplitude, frequency, and wing shape. Second, the problem of hovering flight is studied for single flapping wings. Third, the aerodynamic phenomena and benefits produced by the flapping-wing interactions on tandem wings or biplane configurations are discussed. Such interactions occur on dragonflies or on a recently developed micro air vehicle. The currently available two- and three-dimensional inviscid and viscous flapping-wing flow solutions are presented. It is shown that the results are strongly dependent on flapping frequency, amplitude, and Reynolds number. These findings are substantiated by comparison with the available experimental data.

Flapping Wing Aerodynamics: Progress and Challenges

Significant progress has been made in understanding some of the basic mechanisms of force production and flow manipulation in oscillating foils for underwater use. Biomimetic observations, however, show that there is a lot more to be learned, since many of the functions and details of fish fins remain unexplored. This review focuses primarily on experimental studies on some of the, at least partially understood, mechanisms, which include 1) the formation of streets of vortices around and behind two- and three-dimensional propulsive oscillating foils; 2) the formation of vortical structures around and behind two- and three-dimensional foils used for maneuvering, hovering, or fast-starting; 3) the formation of leading-edge vortices in flapping foils, under steady flapping or transient conditions; 4) the interaction of foils with oncoming, externally generated vorticity; multiple foils, or foils operating near a body or wall.

/pdf/review-of-experimental-work-in-biomimetic-foils-3nzmyvm8y3.pdf

Review of experimental work in biomimetic foils

Formulas are given for the propelling or drag force experience in a uniform air stream by an airfoil or an airfoil-aileron combination, oscillating in any of three degrees of freedom; vertical flapping, torsional oscillations about a fixed axis parallel to the span, and angular oscillations of the aileron about a hinge.

I E Garrick

Papers

Propulsion of a flapping and oscillating airfoil