Ignaas Verpoest

Bio: Ignaas Verpoest is an academic researcher from Katholieke Universiteit Leuven. The author has contributed to research in topics: Epoxy & Ultimate tensile strength. The author has an hindex of 35, co-authored 124 publications receiving 7894 citations.

Natural fibres: Can they replace glass in fibre reinforced plastics ?

Abstract: In this work, natural fibres (sisal, kenaf, hemp, jute and coir) reinforced polypropylene composites were processed by compression moulding using a film stacking method. The mechanical properties of the different natural fibre composites were tested and compared. A further comparison was made with the corresponding properties of glass mat reinforced polypropylene composites from the open literature. Kenaf, hemp and sisal composites showed comparable tensile strength and modulus results but in impact properties hemp appears to out-perform kenaf. The tensile modulus, impact strength and the ultimate tensile stress of kenaf reinforced polypropylene composites were found to increase with increasing fibre weight fraction. Coir fibre composites displayed the lowest mechanical properties, but their impact strength was higher than that of jute and kenaf composites. In most cases the specific properties of the natural fibre composites were found to compare favourably with those of glass.

Fibre hybridisation in polymer composites: a review

Abstract: Fibre-reinforced composites are rapidly gaining market share in structural applications, but further growth is limited by their lack of toughness. Fibre hybridisation is a promising strategy to toughen composite materials. By combining two or more fibre types, these hybrid composites offer a better balance in mechanical properties than non-hybrid composites. Predicting their mechanical properties is challenging due to the synergistic effects between both fibres. This review aims to explain basic mechanisms of these hybrid effects and describes the state-of-the-art models to predict them. An overview of the tensile, flexural, impact and fatigue properties of hybrid composites is presented to aid in optimal design of hybrid composites. Finally, some current trends in fibre hybridisation, such as pseudo-ductility, are described.

Voids in fiber-reinforced polymer composites: A review on their formation, characteristics, and effects on mechanical performance:

Abstract: Voids, the most studied type of manufacturing defects, form very often in processing of fiber-reinforced composites. Due to their considerable influence on physical and thermomechanical properties ...

Morphological aspects and mechanical properties of single bamboo fibers and flexural characterization of bamboo/epoxy composites

Abstract: A novel mechanical extraction process was developed to obtain long bamboo fibers to be used as reinforcement in structural composites. A single-fiber tensile test at four different span lengths for...

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

American Society for Testing and Materials

Abstract: The American Society for Testing and Materials (ASTM) is an independent organization devoted to the development of standards.

Microfibrillated cellulose and new nanocomposite materials: a review

Abstract: Due to their abundance, high strength and stiffness, low weight and biodegradability, nano-scale cellulose fiber materials (e.g., microfibrillated cellulose and bacterial cellulose) serve as promising candidates for bio-nanocomposite production. Such new high-value materials are the subject of continuing research and are commercially interesting in terms of new products from the pulp and paper industry and the agricultural sector. Cellulose nanofibers can be extracted from various plant sources and, although the mechanical separation of plant fibers into smaller elementary constituents has typically required high energy input, chemical and/or enzymatic fiber pre-treatments have been developed to overcome this problem. A challenge associated with using nanocellulose in composites is the lack of compatibility with hydrophobic polymers and various chemical modification methods have been explored in order to address this hurdle. This review summarizes progress in nanocellulose preparation with a particular focus on microfibrillated cellulose and also discusses recent developments in bio-nanocomposite fabrication based on nanocellulose.

A review of recent developments in natural fibre composites and their mechanical performance

Abstract: Recently, there has been a rapid growth in research and innovation in the natural fibre composite (NFC) area. Interest is warranted due to the advantages of these materials compared to others, such as synthetic fibre composites, including low environmental impact and low cost and support their potential across a wide range of applications. Much effort has gone into increasing their mechanical performance to extend the capabilities and applications of this group of materials. This review aims to provide an overview of the factors that affect the mechanical performance of NFCs and details achievements made with them.