Igor Veremchuk

Bio: Igor Veremchuk is an academic researcher from Max Planck Society. The author has contributed to research in topics: Thermoelectric effect & Thermoelectric materials. The author has an hindex of 15, co-authored 66 publications receiving 1045 citations. Previous affiliations of Igor Veremchuk include Shanghai University & Helmholtz-Zentrum Dresden-Rossendorf.

Binary Alkali-Metal Silicon Clathrates by Spark Plasma Sintering: Preparation and Characterization

Abstract: The binary intermetallic clathrates K8-xSi46 (x = 0.4; 1.2), Rb6.2Si46, Rb11.5Si136 and Cs7.8Si136 were prepared from M4Si4 (M = K, Rb, Cs) precursors by spark-plasma route (SPS) and structurally characterized by Rietveld refinement of PXRD data. The clathrate-II phase Rb11.5Si136 was synthesized for the first time. Partial crystallographic site occupancy of the alkali metals, particularly for the smaller Si20 dodecahedra, was found in all compounds. SPS preparation of Na24Si136 with different SPS current polarities and tooling were performed in order to investigate the role of the electric field on clathrate formation. The electrical and thermal transport properties of K7.6Si46 and K6.8Si46 in the temperature range 4–700 K were investigated. Our findings demonstrate that SPS is a novel tool for the synthesis of intermetallic clathrate phases that are not easily accessible by conventional synthesis techniques.

ZT Enhancement in Solution-Grown Sb(2−x)BixTe3 Nanoplatelets

Abstract: We report a solution-processed, ligand-supported synthesis of 15-20 nm thick Sb(2-x)BixTe3 nanoplatelets. After complete ligand removal by a facile NH3-based etching procedure, the platelets are spark plasma sintered to a p-type nanostructured bulk material with preserved crystal grain sizes. Due to this nanostructure, the total thermal conductivity is reduced by 60% in combination with a reduction in electric conductivity of as low as 20% as compared to the bulk material demonstrating the feasibility of the phonon-glass electron-crystal concept. An enhancement in the dimensionless thermoelectric figure of merit of up to 15% over state-of-the-art bulk materials is achieved, meanwhile, shifting the maximum to significantly higher temperatures.

Thermoelectric Properties of Lead Chalcogenide Core–Shell Nanostructures

Abstract: We present the full thermoelectric characterization of nanostructured bulk PbTe and PbTe–PbSe samples fabricated from colloidal core–shell nanoparticles followed by spark plasma sintering. An unusually large thermopower is found in both materials, and the possibility of energy filtering as opposed to grain boundary scattering as an explanation is discussed. A decreased Debye temperature and an increased molar specific heat are in accordance with recent predictions for nanostructured materials. On the basis of these results we propose suitable core–shell material combinations for future thermoelectric materials of large electric conductivities in combination with an increased thermopower by energy filtering.

ZT enhancement in solution-grown Sb(2-x)Bi(x)Te3 nanoplatelets

Abstract: We report a solution-processed, ligand supported synthesis of 15-20 nm thick Sb(2-x)Bi(x)Te3 nanoplatelets. After complete ligand removal by a facile NH3-based etching procedure, the platelets are spark plasma sintered to a p-type nanostructured bulk material with preserved crystal grain sizes. Due to this nanostructure, the total thermal conductivity is reduced by 60 % in combination with a reduction in electric conductivity of as low as 20 % as compared to the bulk material demonstrating the feasibility of the phonon-glass electron-crystal concept. An enhancement in the dimensionless thermoelectric figure of merit of up to 15 % over state-of-the-art bulk materials is achieved meanwhile shifting the maximum to significantly higher temperatures.

Facile general route toward tunable Magnéli nanostructures and their use as thermoelectric metal oxide/carbon nanocomposites.

Abstract: Engineering nanoscale interfaces is a requisite for harnessing electrical and thermal transports within nanostructured materials, especially those destined for thermoelectric applications requiring an unusual combination of low thermal conductivity and electrical resistivity. Nanocomposites open up possibilities in this area, but are still bound to a very narrow range of materials. Here, we report a new approach combining the sol-gel process toward hybrid materials with spark plasma sintering (SPS) to yield functional nanocomposites based on substoichiometric titanium oxides Ti(n)O(2n-1), so-called Magneli phases. The potential of this new approach is demonstrated by three results. First, multiple Ti(n)O(2n-1) compounds (n = 3, 4, 5, 6, 8) are obtained for the first time as sole nano-Magneli crystalline phases with controlled specific surface areas from 55 to 300 m(2)·g(-1), classified as potential thermoelectric n-type metal oxides and paving the way toward advanced systems for energy-harvesting devices and optoelectronics. Second, this work combines the use of sol-gel and SPS processes to yield percolated nanocomposites based on metal oxide nanoparticles embedded in a carbon matrix with low electrical resistivity (2 × 10(-4) Ω·m for a Ti(4)O(7) compound) and reduced thermal conductivity (1 W·m(-1)·K(-1)) with respect to bulk phases. Finally, the discovered materials are reliable with thermoelectric figures of merit (ZT = 0.08) relatively high for n-type Ti-O-based systems and metal oxides. Thereby this study represents a proof of concept for the development of promising, cheaper, and more efficient thermoelectric conversion devices.

Prospects of Nanoscience with Nanocrystals

Abstract: Colloidal nanocrystals (NCs, i.e., crystalline nanoparticles) have become an important class of materials with great potential for applications ranging from medicine to electronic and optoelectronic devices. Today’s strong research focus on NCs has been prompted by the tremendous progress in their synthesis. Impressively narrow size distributions of just a few percent, rational shape-engineering, compositional modulation, electronic doping, and tailored surface chemistries are now feasible for a broad range of inorganic compounds. The performance of inorganic NC-based photovoltaic and light-emitting devices has become competitive to other state-of-the-art materials. Semiconductor NCs hold unique promise for near- and mid-infrared technologies, where very few semiconductor materials are available. On a purely fundamental side, new insights into NC growth, chemical transformations, and self-organization can be gained from rapidly progressing in situ characterization and direct imaging techniques. New phenom...

Advanced Thermoelectric Design: From Materials and Structures to Devices

Abstract: The long-standing popularity of thermoelectric materials has contributed to the creation of various thermoelectric devices and stimulated the development of strategies to improve their thermoelectric performance. In this review, we aim to comprehensively summarize the state-of-the-art strategies for the realization of high-performance thermoelectric materials and devices by establishing the links between synthesis, structural characteristics, properties, underlying chemistry and physics, including structural design (point defects, dislocations, interfaces, inclusions, and pores), multidimensional design (quantum dots/wires, nanoparticles, nanowires, nano- or microbelts, few-layered nanosheets, nano- or microplates, thin films, single crystals, and polycrystalline bulks), and advanced device design (thermoelectric modules, miniature generators and coolers, and flexible thermoelectric generators). The outline of each strategy starts with a concise presentation of their fundamentals and carefully selected examples. In the end, we point out the controversies, challenges, and outlooks toward the future development of thermoelectric materials and devices. Overall, this review will serve to help materials scientists, chemists, and physicists, particularly students and young researchers, in selecting suitable strategies for the improvement of thermoelectrics and potentially other relevant energy conversion technologies.

Nanoscaled metal borides and phosphides: recent developments and perspectives

Abstract: and Perspectives Sophie Carenco,†,‡,§,∥,⊥ David Portehault,*,†,‡,§ Ced́ric Boissier̀e,†,‡,§ Nicolas Meźailles, and Cleḿent Sanchez*,†,‡,§ †Chimie de la Matier̀e Condenseé de Paris, UPMC Univ Paris 06, UMR 7574, Colleg̀e de France, 11 Place Marcelin Berthelot, 75231 Paris Cedex 05, France ‡Chimie de la Matier̀e Condenseé de Paris, CNRS, UMR 77574, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Chimie de la Matier̀e Condenseé de Paris, Colleg̀e de France, 11 Place Marcellin Berthelot, 75231 Paris Cedex 05, France Laboratory Heteroelements and Coordination, Chemistry Department, Ecole Polytechnique, CNRS-UMR 7653, Palaiseau, France

Strong Sulfur Binding with Conducting Magnéli-Phase TinO2n–1 Nanomaterials for Improving Lithium–Sulfur Batteries

Abstract: Lithium–sulfur batteries show fascinating potential for advanced energy storage systems due to their high specific capacity, low-cost, and environmental benignity. However, the shuttle effect and the uncontrollable deposition of lithium sulfide species result in poor cycling performance and low Coulombic efficiency. Despite the recent success in trapping soluble polysulfides via porous matrix and chemical binding, the important mechanism of such controllable deposition of sulfur species has not been well understood. Herein, we discovered that conductive Magneli phase Ti4O7 is highly effective matrix to bind with sulfur species. Compared with the TiO2–S, the Ti4O7–S cathodes exhibit higher reversible capacity and improved cycling performance. It delivers high specific capacities at various C-rates (1342, 1044, and 623 mAh g–1 at 0.02, 0.1, and 0.5 C, respectively) and remarkable capacity retention of 99% (100 cycles at 0.1 C). The superior properties of Ti4O7–S are attributed to the strong adsorption of su...

Thinking Like a Chemist: Intuition in Thermoelectric Materials.

Abstract: The coupled transport properties required to create an efficient thermoelectric material necessitates a thorough understanding of the relationship between the chemistry and physics in a solid. We approach thermoelectric material design using the chemical intuition provided by molecular orbital diagrams, tight binding theory, and a classic understanding of bond strength. Concepts such as electronegativity, band width, orbital overlap, bond energy, and bond length are used to explain trends in electronic properties such as the magnitude and temperature dependence of band gap, carrier effective mass, and band degeneracy and convergence. The lattice thermal conductivity is discussed in relation to the crystal structure and bond strength, with emphasis on the importance of bond length. We provide an overview of how symmetry and bonding strength affect electron and phonon transport in solids, and how altering these properties may be used in strategies to improve thermoelectric performance.