scispace - formally typeset
Search or ask a question
Author

Indrek Roasto

Bio: Indrek Roasto is an academic researcher from Tallinn University of Technology. The author has contributed to research in topics: Flyback converter & Forward converter. The author has an hindex of 17, co-authored 100 publications receiving 1599 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: This paper presents new step-up dc/dc converter topologies intended for distributed power generation systems and describes the operation principles of the proposed topologies and analyzes the theoretical and experimental results.
Abstract: This paper presents new step-up dc/dc converter topologies intended for distributed power generation systems. The topologies contain a voltage-fed quasi-Z-source inverter with continuous input current on the primary side, a single-phase isolation transformer, and a voltage doubler rectifier (VDR). To increase the power density of the converter, a three-phase auxiliary ac link (a three-phase inverter and a three-phase isolation transformer) and a three-phase VDR are proposed to be implemented. This paper describes the operation principles of the proposed topologies and analyzes the theoretical and experimental results.

388 citations

Journal ArticleDOI
TL;DR: In this paper, a review of the literature covering the various types of interfaces developed for electrochemical energy storage systems is presented, including standard, multilevel and multiport technology.

203 citations

Journal ArticleDOI
TL;DR: The proposed cascaded qZSI inherits all the advantages of the traditional solution (voltage boost and buck functions in a single stage, continuous input current, and improved reliability) and reduces the shoot-through duty cycle by over 30% at the same voltage boost factor.
Abstract: This paper is devoted to the step-up dc/dc converter family with a cascaded quasi-Z-source network (qZS-network). The cascaded (two-stage) qZS-network could be derived by the adding of one diode, one inductor, and two capacitors to the traditional quasi-Z-source inverter (qZSI). The proposed cascaded qZSI inherits all the advantages of the traditional solution (voltage boost and buck functions in a single stage, continuous input current, and improved reliability). Moreover, as compared to the conventional qZSI, the proposed solution reduces the shoot-through duty cycle by over 30% at the same voltage boost factor. Theoretical analysis of the two-stage qZSI in the shoot-through and non-shoot-through operating modes is described. The proposed and traditional qZS-networks are compared. A prototype of a step-up dc/dc converter with the cascaded qZS-network was built to verify the theoretical assumptions. The experimental results are presented and analyzed. Finally, a further optimization method of the cascaded qZS-network is proposed, and some practical design issues are discussed.

184 citations

Journal ArticleDOI
TL;DR: In this paper, a quasi-Z-source series resonant dc-dc converter is proposed for photovoltaic module-level power electronics applications, where the shoot-through pulse width modulation and phase shift modulation are combined in a single switching stage to realize the boost and buck operating modes.
Abstract: This paper presents the high-performance quasi-Z-source series resonant dc-dc converter as a candidate topology for the photovoltaic module-level power electronics applications. The converter features a wide input voltage and load regulation range thanks to the multimode operation, i.e., when the shoot-through pulse width modulation and phase-shift modulation are combined in a single switching stage to realize the boost and buck operating modes, respectively. Our experiments confirmed that the proposed converter is capable of ensuring ripple-free 400 V output voltage within the sixfold variation of the input voltage (from 10 to 60 V). The converter prototype assembled achieved a maximum efficiency of 97.4%, which includes the auxiliary power and control system losses.

101 citations

Journal ArticleDOI
TL;DR: A new modulation technique, pulse width modulation (PWM) with shifted shoot-through, is compared with the conventional PWM shoot- through control method, and the new method reduces switching frequency of bottom side transistors and inherently features partial soft switching.
Abstract: Shoot-through control methods for qZSI-based dc/dc converters are presented and studied. The major goal was to increase efficiency. A new modulation technique, pulse width modulation (PWM) with shifted shoot-through, is compared with the conventional PWM shoot-through control method. The new method reduces switching frequency of bottom side transistors and inherently features partial soft switching. Previous studies have shown that the biggest drawback of PWM control with shoot-through is unequal switching frequencies of transistors. One solution to that problem could be signal swapping that has been proposed by the authors of this paper. All control methods are first simulated and then experimentally verified on a test prototype.

73 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors comprehensively review and classify various step-up dc-dc converters based on their characteristics and voltage-boosting techniques, and discuss the advantages and disadvantages of these voltage boosting techniques and associated converters.
Abstract: DC–DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which fundamental energy storing elements (inductors and capacitors) and/or transformers in conjunction with switch(es) and diode(s) are utilized in the circuit. These techniques include switched capacitor (charge pump), voltage multiplier, switched inductor/voltage lift, magnetic coupling, and multistage/-level, and each has its own merits and demerits depending on application, in terms of cost, complexity, power density, reliability, and efficiency. To meet the growing demand for such applications, new power converter topologies that use the above voltage-boosting techniques, as well as some active and passive components, are continuously being proposed. The permutations and combinations of the various voltage-boosting techniques with additional components in a circuit allow for numerous new topologies and configurations, which are often confusing and difficult to follow. Therefore, to present a clear picture on the general law and framework of the development of next-generation step-up dc–dc converters, this paper aims to comprehensively review and classify various step-up dc–dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc–dc converters are presented and summarized with comparative study of different voltage-boosting techniques.

1,230 citations

01 Jan 1992
TL;DR: In this paper, a multilevel commutation cell is introduced for high-voltage power conversion, which can be applied to either choppers or voltage-source inverters and generalized to any number of switches.
Abstract: The authors discuss high-voltage power conversion. Conventional series connection and three-level voltage source inverter techniques are reviewed and compared. A novel versatile multilevel commutation cell is introduced: it is shown that this topology is safer and more simple to control, and delivers purer output waveforms. The authors show how this technique can be applied to either choppers or voltage-source inverters and generalized to any number of switches.<>

1,202 citations

01 Jan 2015
TL;DR: An overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems is presented in this paper.
Abstract: Photovoltaic (PV) energy has grown at an average annual rate of 60% in the last five years, surpassing one third of the cumulative wind energy installed capacity, and is quickly becoming an important part of the energy mix in some regions and power systems. This has been driven by a reduction in the cost of PV modules. This growth has also triggered the evolution of classic PV power converters from conventional singlephase grid-tied inverters to more complex topologies to increase efficiency, power extraction from the modules, and reliability without impacting the cost. This article presents an overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems. In addition, the recent research and emerging PV converter technology are discussed, highlighting their possible advantages compared with the present technology. Solar PV energy conversion systems have had a huge growth from an accumulative total power equal to approximately 1.2 GW in 1992 to 136 GW in 2013 (36 GW during 2013) [1]. This phenomenon has been possible because of several factors all working together to push the PV energy to cope with one important position today (and potentially a fundamental position in the near future). Among these factors are the cost reduction and increase in efficiency of the PV modules, the search for alternative clean energy sources (not based on fossil fuels), increased environmental awareness, and favorable political regulations from local governments (establishing feed-in tariffs designed to accelerate investment in renewable energy technologies). It has become usual to see PV systems installed on the roofs of houses or PV farms next to the roads in the countryside. Grid-connected PV systems account for more than 99% of the PV installed capacity compared to

772 citations

Journal ArticleDOI
TL;DR: An overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems is presented in this article.
Abstract: Photovoltaic (PV) energy has grown at an average annual rate of 60% in the last five years, surpassing one third of the cumulative wind energy installed capacity, and is quickly becoming an important part of the energy mix in some regions and power systems. This has been driven by a reduction in the cost of PV modules. This growth has also triggered the evolution of classic PV power converters from conventional single-phase grid-tied inverters to more complex topologies to increase efficiency, power extraction from the modules, and reliability without impacting the cost. This article presents an overview of the existing PV energy conversion systems, addressing the system configuration of different PV plants and the PV converter topologies that have found practical applications for grid-connected systems. In addition, the recent research and emerging PV converter technology are discussed, highlighting their possible advantages compared with the present technology.

772 citations

Journal ArticleDOI
TL;DR: This review paper is the first of its kind with the aim of providing a “one-stop” information source and a selection guide on impedance-source networks for power conversion for researchers, designers, and application engineers.
Abstract: Impedance networks cover the entire of electric power conversion from dc (converter, rectifier), ac (inverter), to phase and frequency conversion (ac-ac) in a wide range of applications. Various converter topologies have been reported in the literature to overcome the limitations and problems of the traditional voltage source, current source as well as various classical buck-boost, unidirectional, and bidirectional converter topologies. Proper implementation of the impedance-source network with appropriate switching configurations and topologies reduces the number of power conversion stages in the system power chain, which may improve the reliability and performance of the power system. The first part of this paper provides a comprehensive review of the various impedance-source-networks-based power converters and discusses the main topologies from an application point of view. This review paper is the first of its kind with the aim of providing a “one-stop” information source and a selection guide on impedance-source networks for power conversion for researchers, designers, and application engineers. A comprehensive review of various modeling, control, and modulation techniques for the impedance-source converters/inverters will be presented in Part II.

601 citations