Inna Soroka

Bio: Inna Soroka is an academic researcher from Royal Institute of Technology. The author has contributed to research in topics: Copper & Magnetic anisotropy. The author has an hindex of 13, co-authored 50 publications receiving 553 citations. Previous affiliations of Inna Soroka include Stockholm University & Uppsala University.

Exploring monovalent copper compounds with oxygen and hydrogen

Abstract: New important applications of copper metal, e.g., in the areas of hydrogen production, fuel cell operation, and spent nuclear fuel disposal, require accurate knowledge of the physical and chemical properties of stable and metastable copper compounds. Among the copper(I) compounds with oxygen and hydrogen, cuprous oxide Cu(2)O is the only one stable and the best studied. Other such compounds are less known (CuH) or totally unknown (CuOH) due to their instability relative to the oxide. Here we combine quantum-mechanical calculations with experimental studies to search for possible compounds of monovalent copper. Cuprous hydride (CuH) and cuprous hydroxide (CuOH) are proved to exist in solid form. We establish the chemical and physical properties of these compounds, thereby filling the existing gaps in our understanding of hydrogen- and oxygen-related phenomena in Cu metal.

Guiding of highly charged ions through Al2O3 nano-capillaries

Abstract: Over the past years, our group has performed experiments on ion guiding in nano-capillary membranes of polyethylene terephthalate (PET), SiO2 and Al2O3. In this paper we report the results from our recent experiments on guiding of 7 keV Ne7+-ions in Al2O3 nano-capillaries of about 1/200 aspect ratio. We will compare these experimental findings with previously obtained and published results of different membrane materials.

Cuprous hydroxide in a solid form: does it exist?

Abstract: Experimental studies have been performed to obtain the unknown cuprous hydroxide compound, which has recently been predicted theoretically (P. A. Korzhavyi et. al., Proc. Natl. Acad. Sci. U. S. A., 2012, 109, 686–689) to be metastable in a solid form. The reduction of Cu2+ with ferrous ethylenediamine tetraacetate (EDTA) results in the formation of a yellow powder precipitate whose composition corresponds to CuOH × H2O as probed by Fourier Transform Infrared Spectroscopy (FTIR) and cryogenic X-ray Photoelectron Spectroscopy (XPS). A similar compound has been found on the surface of Cu–CuH powder stored in water, as detected by XPS. The reduction of Cu2+ to Cu+ with free radicals in aqueous solutions results in a Cu2O precipitate as the final product, while the formation of the yellow cuprous hydroxide colloids may be an intermediate step. Our studies reveal that cuprous hydroxide does exist in a solid form and most likely has a hydrated form, CuOH × H2O.

Radiation-Engineered Functional Nanoparticles in Aqueous Systems

Abstract: Controlled synthesis of nanoscalar and nanostructured materials enables the development of novel functional materials with fine-tuned optical, mechanical, electronic, magnetic, conductive and catalytic properties that are of use in numerous applications. These materials have also found their potential use in medicine as vehicles for drug delivery, in diagnostics or in combinations thereof. In principle, nanoparticles can be divided into two broad categories, organic and inorganic nanoparticles. For both types of nanoparticles there are numerous possible synthetic routes. Considering the large difference in nature of these materials and the elementary reactions involved in the synthetic routes, most manufacturing techniques are complex and only suitable for one type of particle. Interestingly, radiation chemistry, i.e., the use of ionizing radiation from radioisotopes and accelerators to induce nanomaterials or chemical changes in materials, has proven to be a versatile tool for controlled manufacturing of both organic and inorganic nanoparticles. The advantages of using radiation chemistry for this purpose are many, such as low energy consumption, minimal use of potentially harmful chemicals and simple production schemes. For medical applications one more advantage is that the material can be sterile as manufactured. Radiation-induced synthesis can be carried out in aqueous systems, which minimizes the use of organic solvents and the need for separation and purification of the final product. The radiation chemistry of water is well known, as are the various ways of fine-tuning the reactivity of the system towards a desired target by adding different solutes. This, in combination with the controllable and adjustable irradiation process parameters, makes the technique superior to most other chemical methods. In this review, we discuss the fundamentals of radiation chemistry and radiation-induced synthesis of nanoparticles in aqueous solutions. The impact of dose and dose rate as well as of controlled addition of various solutes on the final particle composition, size and size distribution are described in detail and discussed in terms of reaction mechanism and kinetics.

Magnetization and domain structure of bcc Fe 81 Ni 19 /Co (001) superlattices

Abstract: Dense stripe domains were observed for a ${\mathrm{Fe}}_{81}{\mathrm{Ni}}_{19}/\mathrm{Co}$ superlattice grown on a MgO(100) single crystal substrate using dc magnetron sputtering. The stripe domain period exhibits nonreversible changes with the magnetic field, as determined by magnetic force microscopy. We present a simple theoretical model for this system and calculate the magnetization and domain period as functions of the applied field by minimizing the total energy. For this purpose, an expression for the domain wall energy and wall width for arbitrary angles and one for the magnetostatic energy are derived. The model correctly predicts a decreasing domain period with the increasing applied field. At larger magnetic fields a transition to ``chaotic'' two-dimensional stripe patterns is observed and a qualitative discussion of this phenomenon is given.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trends

Abstract: Atomic layer deposition (ALD) is gaining attention as a thin film deposition method, uniquely suitable for depositing uniform and conformal films on complex three-dimensional topographies. The deposition of a film of a given material by ALD relies on the successive, separated, and self-terminating gas–solid reactions of typically two gaseous reactants. Hundreds of ALD chemistries have been found for depositing a variety of materials during the past decades, mostly for inorganic materials but lately also for organic and inorganic–organic hybrid compounds. One factor that often dictates the properties of ALD films in actual applications is the crystallinity of the grown film: Is the material amorphous or, if it is crystalline, which phase(s) is (are) present. In this thematic review, we first describe the basics of ALD, summarize the two-reactant ALD processes to grow inorganic materials developed to-date, updating the information of an earlier review on ALD [R. L. Puurunen, J. Appl. Phys. 97, 121301 (2005)], and give an overview of the status of processing ternary compounds by ALD. We then proceed to analyze the published experimental data for information on the crystallinity and phase of inorganic materials deposited by ALD from different reactants at different temperatures. The data are collected for films in their as-deposited state and tabulated for easy reference. Case studies are presented to illustrate the effect of different process parameters on crystallinity for representative materials: aluminium oxide, zirconium oxide, zinc oxide, titanium nitride, zinc zulfide, and ruthenium. Finally, we discuss the general trends in the development of film crystallinity as function of ALD process parameters. The authors hope that this review will help newcomers to ALD to familiarize themselves with the complex world of crystalline ALD films and, at the same time, serve for the expert as a handbook-type reference source on ALD processes and film crystallinity.

Probing the Optical Property and Electronic Structure of TiO2 Nanomaterials for Renewable Energy Applications

Abstract: Probing the Optical Property and Electronic Structure of TiO2 Nanomaterials for Renewable Energy Applications

First-principles calculations of electronic structure and spectra of strongly correlated systems: the LDA+U method

Abstract: The generalization of the Local Density Approximation (LDA) method for the systems with strong Coulomb correlations is presented which gives a correct description of the Mott insulators. The LDA+U method is based on the model hamiltonian approach and allows to take into account the non-sphericity of the Coulomb and exchange interactions. parameters. Orbital-dependent LDA+U potential gives correct orbital polarization and corresponding Jahn-Teller distortion. To calculate the spectra of the strongly correlated systems the impurity Anderson model should be solved with a many-electron trial wave function. All parameters of the many-electron hamiltonian are taken from LDA+U calculations. The method was applied to NiO and has shown good agreement with experimental photoemission spectra and with the oxygen Kα X-ray emission spectrum.