scispace - formally typeset
Search or ask a question
Author

Irina Sulaeva

Bio: Irina Sulaeva is an academic researcher from University of Natural Resources and Life Sciences, Vienna. The author has contributed to research in topics: Lignin & Chemistry. The author has an hindex of 11, co-authored 21 publications receiving 492 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: This review highlights possible pathways for functionalization of BC, affecting all levels of its structural organization, including its biocompatibility, water uptake and release, and antimicrobial activity.

307 citations

Journal ArticleDOI
TL;DR: In this article, a dialdehyde xylan (DAX) was synthesized as a water-soluble polysaccharide dialdehydes and a combination of 1D and 2D NMR techniques was confirmed that oxidized xylan is present as poly(2,6-dihydroxy-3-methoxy-5-methyl-3,5-diyl-1,4-dioxane).

72 citations

Journal ArticleDOI
TL;DR: In this paper, a critical review summarizes recent developments from our groups, along with the state-of-the-art in the valorization of technical lignins, with the focus on biorefinery lignin.
Abstract: Sugar-based biorefineries have faced significant economic challenges. Biorefinery lignins are often classified as low-value products (fuel or low-cost chemical feedstock) mainly due to low lignin purities in the crude material. However, recent research has shown that biorefinery lignins have a great chance of being successfully used as high-value products, which in turn should result in an economy renaissance of the whole biorefinery idea. This critical review summarizes recent developments from our groups, along with the state-of-the-art in the valorization of technical lignins, with the focus on biorefinery lignins. A beneficial synergistic effect of lignin and cellulose mixtures used in different applications (wood adhesives, carbon fiber and nanofibers, thermoplastics) has been demonstrated. This phenomenon causes crude biorefinery lignins, which contain a significant amount of residual crystalline cellulose, to perform superior to high-purity lignins in certain applications. Where previously specific applications required high-purity and/or functionalized lignins with narrow molecular weight distributions, simple green processes for upgrading crude biorefinery lignin are suggested here as an alternative. These approaches can be easily combined with lignin micro-/nanoparticles (LMNP) production. The processes should also be cost-efficient compared to traditional lignin modifications. Biorefinery processes allow much greater flexibility in optimizing the lignin characteristics desirable for specific applications than traditional pulping processes. Such lignin engineering, at the same time, requires an efficient strategy capable of handling large datasets to find correlations between process variables, lignin structures and properties and finally their performance in different applications.

70 citations

Journal ArticleDOI
TL;DR: In this article, a multangle light scattering (MALS) detection at 785'nm by using an infrared laser was proposed to determine the molar mass distributions of all types of lignins.
Abstract: Determination of molecular weight parameters of native and, in particular, technical lignins are based on size exclusion chromatography (SEC) approaches. However, no matter which approach is used, either conventional SEC with a refractive index detector and calibration with standards or multi-angle light scattering (MALS) detection at 488 nm, 633 nm, 658 nm, or 690 nm, all variants can be severely erroneous. The lack of calibration standards with high structural similarity to lignin impairs the quality of the molar masses determined by conventional SEC, and the typical fluorescence of (technical) lignins renders the corresponding MALS data rather questionable. Application of MALS detection at 785 nm by using an infrared laser largely overcomes those problems and allows for a reliable and reproducible determination of the molar mass distributions of all types of lignins, which has been demonstrated in this study for various and structurally different analytes, such as kraft lignins, milled-wood lignin, lignosulfonates, and biorefinery lignins. The topics of calibration, lignin fluorescence, and lignin UV absorption in connection with MALS detection are critically discussed in detail, and a reliable protocol is presented. Correction factors based on MALS measurements have been determined for commercially available calibration standards, such as pullulan and polystyrene sulfonate, so that now more reliable mass data can be obtained also if no MALS system is available and these conventional calibration standards have to be resorted to.

60 citations

Journal ArticleDOI
TL;DR: A review of the methods applied to elucidate macromolecular branching can be found in this paper, where the authors point out that conventional lignification theory disagrees with the presence of such key moieties in softwood wood lignin and the observed high degree of branching/cross-linking.

56 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The aims of this review are to provide an overview of the production of BC from different culture methods, to analyze the characteristics of particular BC productions, to indicate existing problems associated with different methods, and to choose suitable culture approaches for BC applications in different fields.

369 citations

Journal ArticleDOI
TL;DR: In this paper, the authors present a set of guidelines for analysing critical data from lignin-first approaches, including feedstock analysis and process parameters, with the ambition of uniting the lignIN-first research community around a common set of reportable metrics, including fractionation efficiency, product yields, solvent mass balances, catalyst efficiency, and requirements for additional reagents such as reducing, oxidising, or capping agents.
Abstract: The valorisation of the plant biopolymer lignin is now recognised as essential to enabling the economic viability of the lignocellulosic biorefining industry. In this context, the “lignin-first” biorefining approach, in which lignin valorisation is considered in the design phase, has demonstrated the fullest utilisation of lignocellulose. We define lignin-first methods as active stabilisation approaches that solubilise lignin from native lignocellulosic biomass while avoiding condensation reactions that lead to more recalcitrant lignin polymers. This active stabilisation can be accomplished by solvolysis and catalytic conversion of reactive intermediates to stable products or by protection-group chemistry of lignin oligomers or reactive monomers. Across the growing body of literature in this field, there are disparate approaches to report and analyse the results from lignin-first approaches, thus making quantitative comparisons between studies challenging. To that end, we present herein a set of guidelines for analysing critical data from lignin-first approaches, including feedstock analysis and process parameters, with the ambition of uniting the lignin-first research community around a common set of reportable metrics. These guidelines comprise standards and best practices or minimum requirements for feedstock analysis, stressing reporting of the fractionation efficiency, product yields, solvent mass balances, catalyst efficiency, and the requirements for additional reagents such as reducing, oxidising, or capping agents. Our goal is to establish best practices for the research community at large primarily to enable direct comparisons between studies from different laboratories. The use of these guidelines will be helpful for the newcomers to this field and pivotal for further progress in this exciting research area.

320 citations

Journal ArticleDOI
TL;DR: The BC-based drug delivery could be further fine-tuned to get more sophisticated control on stimuli-responsive drug release and along with the currently available literature, further experiments are required to obtain a blueprint of drug in vivo performance, bioavailability and in vitro–in vivo correlation.
Abstract: Bacterial cellulose (BC) is a versatile biopolymer with better material properties, such as purity, high degree of porosity, relative high permeability to liquid and gases, high water-uptake capacity, tensile strength and ultrafine network. This review explores the applications of BC and its hydrogels in the fields of food, cosmetics and drug delivery. Applications of BC in foods are ranging from traditional dessert, low cholesterol diet, vegetarian meat, and as food additive and dietary aid to novel applications, such as immobilization of enzymes and cells. Applications in cosmetics include facial mask, facial scrub, personal cleansing formulations and contact lenses. BC for controlled drug delivery, transdermal drug delivery, dental drug delivery, protein delivery, tissue engineering drug delivery, macromolecular prodrug delivery and molecularly imprinted polymer based enantioselective drug delivery are also discussed in this review. The applications of BC in food and cosmetics provide the basis for BC-based functional foods, nutraceuticals, cosmeceuticals and medicated cosmetics. On the basis of current studies, the BC-based drug delivery could be further fine-tuned to get more sophisticated control on stimuli-responsive drug release. Along with the currently available literature, further experiments are required to obtain a blueprint of drug in vivo performance, bioavailability and in vitro–in vivo correlation.

290 citations

Journal ArticleDOI
TL;DR: This review assesses the BC main features and emphasis is given to a specific biomedical application: wound dressings, with particular focus on the biochemistry and genetic manipulation of BC.
Abstract: Although several therapeutic approaches are available for wound and burn treatment and much progress has been made in this area, room for improvement still exists, driven by the urgent need of better strategies to accelerate wound healing and recovery, mostly for cases of severe burned patients. Bacterial cellulose (BC) is a biopolymer produced by bacteria with several advantages over vegetal cellulose, such as purity, high porosity, permeability to liquid and gases, elevated water uptake capacity and mechanical robustness. Besides its biocompatibility, BC can be modified in order to acquire antibacterial response and possible local drug delivery features. Due to its intrinsic versatility, BC is the perfect example of a biotechnological response to a clinical problem. In this review, we assess the BC main features and emphasis is given to a specific biomedical application: wound dressings. The production process and the physical-chemical properties that entitle this material to be used as wound dressing namely for burn healing are highlighted. An overview of the most common BC composites and their enhanced properties, in particular physical and biological, is provided, including the different production processes. A particular focus is given to the biochemistry and genetic manipulation of BC. A summary of the current marketed BC-based wound dressing products is presented, and finally, future perspectives for the usage of BC as wound dressing are foreseen.

286 citations

Journal ArticleDOI
TL;DR: 3D printing of bacteria-laden hydrogels enables the digital fabrication of complex functional materials displaying spatially specific compositions, geometry, and properties not accessed by standard technologies can be assembled from bottom up for new biotechnological and biomedical applications.
Abstract: Despite recent advances to control the spatial composition and dynamic functionalities of bacteria embedded in materials, bacterial localization into complex three-dimensional (3D) geometries remains a major challenge. We demonstrate a 3D printing approach to create bacteria-derived functional materials by combining the natural diverse metabolism of bacteria with the shape design freedom of additive manufacturing. To achieve this, we embedded bacteria in a biocompatible and functionalized 3D printing ink and printed two types of “living materials” capable of degrading pollutants and of producing medically relevant bacterial cellulose. With this versatile bacteria-printing platform, complex materials displaying spatially specific compositions, geometry, and properties not accessed by standard technologies can be assembled from bottom up for new biotechnological and biomedical applications.

285 citations